SCHWAIGER ZHS19 Door and Window Sensor User Manual

June 10, 2024
Schwaiger

SCHWAIGER Logo SCHWAIGER ZHS19 Door and Window SensorUSER MANUAL ZHS19

ZHS19 Door and Window Sensor

Congratulations and thank you for purchasing the Schwaiger ZHS19 product. Below you will find useful operating guidelines.
Network inclusion of the sensor
Put the Gateway into inclusion mode.
Remove the protective battery cover, press the networking button for 2 seconds until the green LED starts to flash fast.
This is a smart door and window sensor which is based on the Zambezi Wireless Networking technology. It has a very low power consumption which makes for longer battery life. The sensor detects whether a door or window is opened or closed. Thanks to the dual sensor design, installation is even more flexible and adaptable.

Network inclusion

  1. Remove the protective battery cover

  2. Put the Gateway into inclusion mode
    Please pay attention to the fact that during network inclusion, the distance between sensor and Gateway may not exceed 0.5 m.

  3. Networking button
    Press the networking button (within the hole) for 2 seconds until the green LED starts to flash fast, then let go. The device will be detected and included into the network.SCHWAIGER ZHS19 Door and Window Sensor - Reset to
default settings 1

  4. Installation of Door/Window Sensor
    Select a place for installation. Remove the protective cover and stick the bracket to the place desired. The sensor should be installed at an immovable place, e.g. a door frame. The magnet can be installed on either side of the sensor at the movable part of the location (e.g. door panel, see example).
    The distance between sensor and magnet should not exceed 15 mm.

  5. Attach the sensor to the bracketSCHWAIGER ZHS19 Door and Window Sensor - Reset to default settings 2

  6. Network removal of the device
    Put the Gateway into removal mode by choosing „Home setup“ in the main menu and then click on „Add device“ (See images on the left). Then reset the device to default settings.

  7. Reset to default settings
    Press the networking button for 5 seconds until the green LED starts to flash slowly. Note: For network inclusion, the sensor must always be in the factory state.SCHWAIGER ZHS19 Door and Window Sensor - Reset to default
settings

LED indicator of devices

Network inclusion| Press the networking button for 2 seconds until the green LED starts to flash (two times per second)
---|---
Network removal / Reset| The green LED flashes 6 times (once per second)
Alarm (anti-tamper key)| The red LED flashes once

SCHWAIGER ZHS19 Door and Window Sensor - Reset to default settings
3

Technical data

Working voltage DC 3 V (2 x AAA battery)
Static current 5 5 pA
Alarm current 5 35 mA
Detecting distance < 15 mm
Range about 15 m (depending on building structure)
Working environment -10°C — +50°C
Transmission power <1 mW
Frequency range 2405-2480 MHz
Sensor dimension 76 x 36.6 x 16.5 mm
Magnet dimension 76 x 13.9 x 16.5 mm

Read these instructions before installing!
Do not use the device in any manner other than that specified in the man-ual. The manufacturer disclaims any guarantee if the device is used improperly.
CAUTION!
The device is not a toy. Keep away from children and pets. The device cannot be repaired and must not be opened.
Disposal
Do not dispose of batteries or electric and electronic devices in the normal household waste. The consumer is legally obliged to return electrical and electronic devices and batteries that are at the end of their useful life to the point of sale or public collection points that have been set up for this purpose. Legislation in the country of use governs individual details regarding disposal.
batteries should be disposed of separately. The symbol on the product, the user guide or the packaging indicates this legal requirement.
Declaration of conformity Schwaiger GmbH hereby declares that the specified radio equipment product complies with
Directive
2014/53/EU and other applicable directives. The complete EU declaration of conformity is available online at: http://download.schwaiger.de
Explanation of symbols

CAUTION! This symbol indicates a danger.
NOTE: This symbol indicates important points.

MANUFACTURER INFORMATION

Dear Customer,
should you require technical advice and your retailer could not help please contact our technical support.

SCHWAIGER QR Schwaiger GmbH
Würzburger Straße 17
90579 Langenzenn
Hotline: +49 (0) 9101 702-199
www.schwaiger.de
[email protected]SCHWAIGER
Logo

Documents / Resources

| SCHWAIGER ZHS19 Door and Window Sensor [pdf] User Manual
ZHS19 Door and Window Sensor, ZHS19, Door and Window Sensor, Window Sensor
---|---

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Schwaiger User Manuals

Related Manuals