YATWIN-RUNNER PRO Bluetooth Neckband Sports Headset User Manual

: June 10, 2024
: YATWIN

Table of Contents

Security Precautions
Overview of Headset
Overview of Headset
Overview of Headset
FAQ
Specification
Read User Manual Online (PDF format)
Download This Manual (PDF format)

YATWIN-RUNNER PRO Bluetooth Neckband Sports Headset
User Manual

Security Precautions

In order to have a proper and safe use of the headset, please read this user manual in detail and save it.
Be aware of the following guidelines when using your headset:

You should adjust the volume carefully when using the headset to prevent hearing damage.
Please stop using the headset in potentially hazardous situations to ensure your safety.
Please avoid using the headset to listen to music, make or receive calls which may cause a distraction while driving.
Put this product and its accessories somewhere out of the reach of children, to avoid a fatal danger caused by inappropriate use.
You should keep water from entering the headset, which may cause damage to the sound quality or the headset.
You should avoid turning the volume so high that you can’t hear anything around you. If you feel a tinnitus or the volume is too high, please reduce the volume.
Stop using the headset if you feel obvious discomfort, irritation or have other adverse reactions.
The headset should not be stored or used at temperatures below -10 ℃ or above 50 ℃ which may shorten headset or battery life

YATWIN-RUNNER PRO Bluetooth Neckband Sports Headset -
parts

Overview of Headset

Overview of YATWIN-RUNNER PRO Bluetooth stereo headset: YATWIN-RUNNER
PRO Bluetooth Neckband Sports Headset - headset

Charger and battery

Before charging, make sure the headset has been switched off.
Plug USB cable into the charging port of headset; plug the other side of USB cable into the USB charger or other charging device. Charging will start and the red light remains bright on the headset.
Charging time of headset takes approximately up to 1 hour , the red light will turn white when fully charged

Overview of Headset

Warning: You must use the original cable to charge the Bluetooth headset, otherwise it may damage the headset. Thus, voltage of charger must be 5V, electric current at 95mA around.
This headset uses a non-detachable built-in rechargeable battery, in order to prevent damage to the headset, please do not remove the battery.
Power on:
Keep pressing the MF button 2s,blue light blinks.
Pairing Mode:
Keep pressing the MF button 5s,blue light quick blinks
Switch off:
Keep pressing the MF button 3s,red light will go for 1s then go out.
Pair your headset with your cell phone ：

Keep the distance between the headset and cell phone (or other devices being connected) within 1 meter. The closer the better.
Keep pressing the MF button until the blue lights quick blinks.
Initiate Bluetooth function of cell phone (or other device being connected). on your phone.
Then “YATWIN-RUNNER PRO” will be shown
Select “YATWIN-RUNNER PRO” (some cell phones need you to input the PIN “0000” as password) and the headset will automatically connect with your cell phone, the blue-light will be always on.
Attention: Generally, there is 300 seconds maximum to pair the headset with your cell phone, or the Bluetooth pairing mode will stop when the lights goes out. Please retry steps 1 to 4 to pair again if your operation doesn’t work.

Overview of Headset

To disconnect the headset with your cell phone:

Turn off the Bluetooth function of your cell phone.
Or keep pressing the MF button until the red light goes on for 1s and then goes out, to switch off the headset.
Or take the headset from the cell phone to more than 10m (30ft ）away

To reconnect the paired headset with your mobile phone:

Keep the distance of the headset and cell phone (or other devices being connected) within 1 meter. The closer the better.
Switch on the headset, and the headset will enter into reconnection mode when the blue light blinks.
Switch on the Bluetooth search function in your cell phone Answer incoming call:
When there is an incoming call, press the call button once to answer the call, or use your cell phone to answer it. Reject a call:
When there is an incoming call, press the call button twice to reject the call, or use your cell phone to reject the call.

Hang up a call:
Press the call button once or use your cell phone to hang up your call. or other devices being connected. Then the headset will automatically reconnect with the mobile phone which has connected last time

FAQ

Last call redialling:
In standby mode, double-click the call button to redial your last call.
Music Play/Pause:
Press MF button once to play/pause music.
Volume adjustment/Music selection:
Press Vol(+) and Vol(-) once to adjust volume; keep pressing the Vol(+) and Vol(-) to select next track or previous track.
Siri function:
Keep pressing MF button for 2s to launch Siri function.

FAQ

YATWIN-RUNNER PRO Headset cannot pair with Cell phone?
Ans: Please check whether your headset is in pairing mode or reconnection mode and check whether the Bluetooth function in your cell phone is on. Now check your device’s Bluetooth menu and delete/forget the headset and reconnect the headset again as before.
YATWIN-RUNNER PRO headset cannot be switched on?
Ans: Please check the battery status of your headset.
Can I change the battery for the headset?
Ans: No, this headset use a built-in non-detachable Li-Polymer battery, it cannot be removed.
Can I use headset while driving?
Ans: For safety reason, we strongly recommend not to use over-ear headset to avoid distraction while driving.
YATWIN-RUNNER PRO headset has disconnected with your cell phone within 10 meters?
Ans: Please check if there is metal or other material within a relatively close range which may interfere with the Bluetooth connection. Bluetooth is a radio technology which is sensitive to objects between the headset and the connected device.
I cannot hear a sound from your computer or cell phone?
Ans: Please check whether the output channel of your computer is Bluetooth, that the Audio Device and Bluetooth function of your computer support A2DP profile. And please check that the volume on your headset/computer/cell phone is turned up.
I cannot use the headset to control the volume, to select a track or APP of my cell phone?
Ans: The Software settings of the APP may vary and lead to some functions of the APP not control able by the headset.

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not ccur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Note 2: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.