ACTIVE KEY AK-PMH21OS-F Series Wireless Medical Mouse with Touch Scroll Sensor User Guide
- June 10, 2024
- ACTIVE KEY
Table of Contents
AK-PMH21OS-F Series Wireless Medical
Mouse with Touch Scroll Sensor
User Guide
Instructions and Safety Information
AK-PMH21OS-F series
Wireless Medical Mouse with Touch Scroll Sensor
Quick Start:
- Insert the supplied batteries as marked inside the battery compartment.
- Close the battery cover and tighten the screws.
- Connect the USB-RF-Dongle to the USB port of your host PC.
- Start using the mouse after automatic driver installation has completed.
Delivery Content:
1x 2,4 GHz Wireless Mouse
1x 2,4 GHz USB-RF-Dongle
2x non-rechargeable Batteries AAA (Alkali-Mangan)
1x Screwdriver
1x User Instructions
Safety Note: The enclosed batteries must not be charged!
Manufacturer:
Active Key GmbH
Brunnenäcker 6
D-91257 Pegnitz
| Web: | www.activekey.de |
|---|---|
| Phone: | +49(0)9241/48337-0 |
| Fax: | +49(0)9241/48337-29 |
| Email: | info@activekey.de |
U.S. Responsible Party:
Cherry Americas LLC 5732 95th Ave.,
Suite 850 Kenosha, WI 53144, United StatesContact Person:| Ed Ferraton
---|---
FCC ID:| +1 262-942-6393
Email:|
ed.ferraton@cherryamericas.com
Product Name:| Wireless Medical Mouse, USB-RF-Dongle
Model Number(s):| HM803B, DON2
FCC ID| 2ACVU-HM803B, 2ACVU-D2
Specification:
| Frequency-band | 2400 MHz – 2483,5 MHz |
|---|---|
| Maximum transmission power | 10 mW |
| Agency Approvals and Tests: | CE, RoHS, FCC, EN 60601-1-2:2015* |
- No Medical Device acc.to Regulation (EU) 2017/745
Legal Information FCC:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
All rights reserved. Copy or duplication, except for personal use, not
permissible without specific prior written consent by Active Key
GmbH. Contents are subject to change without notice. Errors excepted.
© Active Key GmbH; Version 20230402
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Legal information CE:
Hereby Active Key GmbH declares that the type of radio equipment used with the
product models HM803B (Wireless Medical Mouse) and DON2 (USB-RF Dongle)
complies with the RED 2014/53/EU directive. The full text of the EU
declaration of conformity is available at the following internet address:
https://www.activekey.de/ce-doc/CE_DOC_RED_2014-53-EU_AK-PMH21.pdf
As distributor of batteries, we have the following obligations under article
20 of directive 2006/66/EC:
- Batteries can be returned free of charge after use in shops selling batteries.
- End users are legally obliged to return used batteries.
- Manufacturers of batteries are required to mark batteries with symbol of the crossed-out wheeled bin before placing them on the market for the first time.
The manufacturer of batteries shall label batteries containing more than
0.0005 % by mass of mercury, more than 0.002 % by mass of cadmium or more than
0.004 % by mass of lead, before placing them on the market for the first time
with the chemical symbols of metals (Hg, Cd, Pb) in which the limit is
exceeded. The characters are to be applied below the symbol.
Electrical and electronic equipment (EEE) is marked with the symbol of the
crossed-out wheeled bin indicating the requirement not to dispose of waste
electrical and electronic equipment (WEEE) as unsorted municipal waste and to
collect such WEEE separately.
Final users of WEEE from private households shall be able to return WEEE as
per EU country local regulations into established collection facilities free
of charge. Please consult your municipal waste department for detailed advice
on separate collection of WEEE.
Frequently Asked Questions (FAQ):
Usage of Medical protective gloves!****
– We recommend the use of nitrile gloves instead of latex gloves in the operation of our products! This reduces the risk of allergies and avoids yellowing of the product by abrasion of the latex.
How to determine the battery status?****
– 1) The low battery indicator LED is located at the bottom side next to the
optical sensor.
– 2) Press both mouse buttons at the same time to activate the low battery
indicator LED.
– 3) The LED will light in green to indicate a battery voltage > 2.2 V
– 4) The LED will light in red to indicate a battery voltage <= 2.2 V. Please
change batteries.
– 5) The mouse operation stops at a battery level of 2 V.
How to operate Wireless Mouse and Keyboard via the same USB-RF- Dongle?****
– 1) Both Wireless Mouse series AK-PMH21OS-F and any Active Key Wireless
Keyboard can operate via one and the same USB-RF-Dongle!
– 2) The feature is only supported with dongle-model “DON2” which is provided
with the AKPMH21OS-F series.
– 3) Please confirm the model-name of the dongle which is engraved on the
metal part of the dongle.
– 4) Disconnect the USB-RF-Dongle of the Wireless Keyboard from your host PC
and connect only the USB-RF-Dongle of the Wireless Mouse.
– 5) Use the key combination Fn & Esc to pair the Keyboard with the USB-RF-
Dongle of the Mouse.
How to pair a new USB-RF-Dongle with the mouse?****
– Note: This procedure is only required in case you received a new USB-RF-
Dongle as a spare part in case the dongle was lost or damaged!
– 1) Remove the batteries from the mouse, remove the dongle from the computer.
– 2) Connect the dongle with the computer.
– 3) Install the batteries to the mouse. Place the mouse as close as possible
to the dongle. Press the middle button (inside the battery compartment) for
one time and the battery indicator LED will flash for 3 seconds.
– 4) Test the mouse for function. If the pairing process was not successful,
please repeat the instructions from step 1). In case of problems please
contact our customer services.
Packaging Recycling Information:
The packaging material used with this product can be recycled and is identified as PAP-20 and LDPE-04. Please follow the rules of your local community on collection of packaging material.
References
- acc.to
- Active Key Tastaturen & Mäuse für Hygiene, Medizin, Industrie
- Active Key Tastaturen & Mäuse für Hygiene, Medizin, Industrie
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>