victoria albert VA007SW Pico Colima Steller Instruction Manual

volcanic limestone baths
VA007SW Pico Colima Steller
Instruction Manual

K12 Marking Out

Sample bath shown

Steller Only (sample bath shown)

K12 Fitting

Drilling Overflow Holes

Cleaning & Care

To be removed for use by the homeowner/ occupant
Receiving and Installing Goods
The fitting of the bath feet or installation of the entire product will be seen as acceptance of quality. We strongly recommend that you use a suitable qualified installer. Instructions must be adhered to. We cannot accept responsibility for incorrect installation.
Please note that shrinkage lines, air holes, casting marks and blemishes on the underside of the product (where they cannot be seen when turned upright) do not adversely affect performance or aesthetics and are not regarded as defects.
Should you wish to paint or customise the outside of your bath/vessel basin, please follow the below instructions.
Day to day use
Please note that whilst our material has excellent stain resistance, we recommend that bath water containing
Cleaning
additives such as oils and bath salts is always drained and rinsed off with clean water immediately after use. We recommend soap with plenty of warm water. All cleaners should be fully rinsed off afterwards with clean water. For any stubborn staining, we recommend the use of our polishing kit, which is available from customer services.

www.vandabaths.com FI-2-0001(E)

Documents / Resources

| victoria albert VA007SW Pico Colima Steller [pdf] Instruction Manual
VA007SW Pico Colima Steller, VA007SW, Pico Colima Steller, Colima Steller, Steller
---|---

References

• Select language | Victoria + Albert Luxury Baths

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>