DAEWOO DA1E6FW0ES Dishwasher User Manual

DAEWOO DA1E6FW0ES Dishwasher

Product Information

The product is a dishwasher with the model number DA1E6FI0ES-DA1E6FW0ES. It has a user manual that contains important information on safety and instructions for operation and maintenance. The dishwasher has various technical specifications that are outlined in the manual, including information on appearance and dimensions.

Technical Specifications
The general appearance of the dishwasher is described as per the manual. It has specific technical specifications such as its dimensions, water consumption, and energy usage. These details are important to consider when setting up and using the dishwasher.

Safety Information
The manual includes various safety icons that provide information on potential risks associated with operating the dishwasher. Users must understand these icons and adhere to the safety instructions provided to prevent damage to property or injury to individuals.

Product Usage Instructions

Before using the dishwasher, it is essential to read the user manual carefully to ensure proper operation and maintenance.

Installation
The first step in using the dishwasher is to install it correctly. The user manual recommends having an authorised service agent install the machine to ensure it is done correctly. Additionally, users should check that the indoor electrical fuse system is connected in line with safety regulations.

Operation
When using the dishwasher, users must follow the programme table outlined in the user manual. The control panel provides information on changing or cancelling a programme and switching off the machine.

Maintenance
Maintaining the dishwasher is crucial to ensure it lasts a long time. Users should fill the rinse-aid and make sure it’s set correctly. Additionally, if there is any residue left in the machine after washing, users should keep children away from the machine when it’s open.

Safety
Users must follow safety instructions outlined in the user manual to prevent injury to individuals or damage to property. This includes keeping children away from the machine, removing packaging and keeping it out of reach of children, and using detergents and rinse aids safely.

Thank you for choosing this product.
This User Manual contains important information on safety and instructions intended to assist you in the operation and maintenance of your appliance. Please take the time to read this User Manual before using your appliance and keep this book for future reference.

SAFETY INSTRUCTIONS

General Safety Warnings

• Read these instructions carefully before using your appliance and keep this manual for future reference.
• Please check the packaging of your machine before installation and the outer surface of the machine once the packaging has been removed. Do not operate the machine if it appears damaged or if the packaging has been opened.
• Packaging materials protect your machine from any damage that might occur during transportation. The packaging materials are environmentally friendly as they are recyclable. Use of recycled material reduces raw material consumption and decreases waste production.
• This appliance can be used by children aged from 8 years and above, and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand hazards involved. Children should not be allowed to play with the appliance.
• Remove packaging and keep it out of reach of children.
• Keep children away from detergents and rinse aids.
• There may be some residue left in the machine after washing. Keep children away from the machine when it is open.

Installation Warnings

• Choose a suitable and safe place to install your machine.
• Only original spare parts should be used with the machine.
  • Unplug the machine before installation.
  • Your machine must only be installed by an authorised service agent. Installation by anyone other than an authorised agent may cause your warranty to be void.
  • Check that the indoor electrical fuse system is connected in line with safety regulations.
  • All electrical connections must match the values on the plate.
  • Ensure the machine does not stand on the electrical supply cable.
  • Never use an extension cord or a multiple-socket connection.
  • The plug should be accessible after the machine is installed.
• After installation, run your machine unloaded for the first time.
  • The machine must not be plugged in during positioning.
  • Always use the coated plug supplied with your machine.
  • If the electrical cable is damaged, it should only be replaced by a qualified electrician.
• Connect the hose directly to the water inlet tap. The pressure supplied by the tap should be a minimum of 0.03 MPa and a maximum of 1 MPa. If the pressure exceeds 1 MPa, a pressure relief valve must be fitted between the connection.

During Usage

• This machine is for domestic use only; do not use
• it for other purposes. Commercial use will void the guarantee.
  • Do not stand, sit or place loads on the open door of the dishwasher.
  • Only use detergents and rinse aids produced specifically for dishwashers. Our company is not responsible for any damage that may occur due to misuse.
  • Do not drink water from the machine.
  • Due to the danger of explosion, do not place any chemical dissolving agents into the machine’s washing section.
• Check the heat resistance of plastic items before washing them in the machine.
  • Only put items in the machine which are suitable for dishwashing, and take care not to overfill the baskets.
  • Do not open the door while the machine is in operation, hot water may spill out. Safety devices ensure the machine stops if the door is opened.
  • The machine door should not be left open. It may cause accidents.
  • Place knives and other sharp objects in the cutlery basket in a blade-down position.
  • For models with the automatic door-opening system, when the EnergySave option is active, the door will open at the end of a program. To prevent damage to your dishwasher, do not attempt to close the door for one minute after it has opened. For effective drying, keep the door open for 30 minutes after a program has ended.
  • Do not stand in front of the door after the auto-open signal sounds.
  • In the case of a malfunction, repair should only be performed by an authorized service company, otherwise, the warranty will be void.
  • Before repair work, the machine should be disconnected from the mains. Do not pull the cable to unplug the machine. Switch off the water tap.
  • Operation at a low voltage will cause a decline in performance levels.
  • For safety, disconnect the plug once the program has finished.
  • To avoid an electric shock, do not unplug the machine with wet hands.
  • Pull the plug to disconnect the machine from the mains, never pull on the cord.

RECYCLING

• Some machine components and packaging consist of recyclable materials.
• Plastics are marked with the international abbreviations:(>PE<, >PP<, etc. )
• The cardboard parts consist of recycled paper. They can be put into waste paper containers for recycling.
• Material unsuitable for domestic waste must be disposed of at recycling centres.
• Contact a relevant recycling centre to obtain information about disposal of different materials.

PACKAGING AND THE ENVIRONMENT
Packaging materials protect your machine from damage that may occur during transportation. The packaging materials are environmentally friendly as they are recyclable. The use of recycled material reduces raw material consumption and therefore decreases waste production.

CE Declaration of Conformity
We declare that our products meet the applicable European Directives, Decisions and Regulations and the requirements listed in the standards referenced.

Disposal of your old machine
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where the product was purchased.

INSTALLATION

Machine positioning
When positioning the machine, place it in an area where dishes can be easily loaded and unloaded. Do not put the machine in an area where the ambient temperature falls below 0°C.

• Read all warnings located on the packaging before removing the packaging and positioning the machine.
• Place the machine close to a water tap and drain. Take into consideration that the connections will not be altered once the machine is in position.
• Do not hold the machine by its door or panel.

Leave an adequate distance around the machine to allow ease of movement when cleaning.

• Ensure the water inlet and outlet hoses are not squeezed or trapped and that the machine does not stand on the electrical cable while positioning.
• Adjust the feet so the machine is level and balanced. The machine should be placed on flat ground otherwise it will be unstable and the door of the machine will not close properly.

Water connection
We recommend fitting a filter to your water inlet supply in order to prevent damage to your machine due to contamination (sand, rust, etc.) from indoor plumbing. This will also help prevent yellowing and deposit formation after washing.

Note printing on the water inlet hose!
If models are marked with 25°, the water temperature may be max. 25 °C (cold water).

For all other models:

• Cold water preferred; hot water max. temperature 60 °C.

Water inlet hose

• WARNING: Use the new water inlet hose supplied with your machine, do not use an old machine’s hose.

• WARNING: Run water through the
  new hose before connecting.

• WARNING: Connect the hose directly to the water inlet tap. The pressure supplied by the tap should be a minimum of 0.03 MPa and a maximum of 1 MPa. If the pressure exceeds 1 MPa, a pressure relief valve must be fitted between the connection.

• WARNING: After the connections are made, turn the tap on fully and check for water leaks. Always turn off the water inlet tap after a wash program has finished.

  • An Aquastop water spout is available with some models. Do not damage it or allow it to become kinked or twisted.

Drain Hose

Connect the water drain hose directly to water drain hole or to the sink outlet spigot. This connection should be minimum 50 cm and maximum 110 cm from floor that dishwasher is placed.

IMPORTANT: Items will not wash properly if a drain hose longer than 4 m is used.

Electrical connection

• WARNING: Your machine is set to operate at 220-240 V. If the mains voltage supply to your machine is 110 V, connect a transformer of 110/220 V and 3000 W between the electrical connection.
• Connect the product to a grounded outlet protected by a fuse complying with the values in the “Technical Specifications” table”.
• The earthed plug of the machine must be connected to an earthed outlet supplied by suitable voltage and current.
• In the absence of earthing installation, an authorized electrician should carry out an earthing installation. In the case of use without earthing installed, we will not be responsible for any loss of use that may occur.
• The plug on this appliance may incorporate 13A fuse depending on the target country. (For Example UK, and Saudi Arabia)

Fitting the machine undercounter
If you wish to fit your machine undercounter, there must be sufficient space to do so and the wiring-plumbing must be suitable to do so (1). If the space under the countertop is suitable for fitting your machine, remove the worktop as shown in illustration (2).

WARNING:
The countertop, which the machine will be placed under, must be stable in order to prevent imbalance.

• The top panel of the dishwasher must be removed to fit the machine under the countertop.
• To remove the top panel, remove the screws that hold it on, located at the rear of the machine. Then, push the panel 1 cm from the front towards the rear and lift it. Adjust the machine feet according to the slope of the floor (3).
• Fit your machine by pushing it under the counter taking care not to crush or bend the hoses (4).
• WARNING: After removing the top panel of your dishwasher, the machine should be placed in a space of the dimensions shown in the figure below.

| A| B
---|---|---
All Products| B1| B2
Product’s Height (±2 mm)| 820 mm| 830 mm| 835 mm

• A: If there is no felt on the top of the product; you should take into account this product’s height.
• B1: If there is felt on the top of the product with 2nd basket; you should take into account this product’s height.
• B2: If there is felt on the top of the product with 3rd basket; you should take into account this product’s height.

TECHNICAL SPECIFICATIONS

General appearance

1. Worktop
2. Upper basket with racks
3. Upper spray arm
4. Lower basket
5. Lower spray arm
6. Filters
7. Rating plate
8. Control panel
9. Detergent and rinse-aid dispenser
10. Cutlery basket
11. Salt dispenser
12. Upper basket track latch
13. Super Active Drying Unit:
    This system provides better drying performance for your dishes.

Technical specifications

Dimensions (mm)

Height Width Depth

| 850(mm)

598(mm)

598(mm)

Net weight| 41 kg
Operating voltage/frequency| 220-240V

50 Hz,

Total current (A)| 10(A)
Total power (W)| 1900(W)

Water supply pressure

| Maximum: 1 (Mpa) Minimum:

0.03 (Mpa)

BEFORE USING THE APPLIANCE

Preparing your dishwasher for first use

• Make sure the electricity and supply water specifications match the values indicated in the installation instructions for the machine.
• Remove all packaging material inside the machine.
• Set the water softener level.
• Fill the rinse aid compartment.

Salt usage (IF AVAILABLE)
For a good washing function, the dishwasher needs soft, i.e. less calcareous water. Otherwise, White lime residues will remain on the dishes and the interior equipment. This will negatively affect your machine’s washing, drying and shining performance. When water flows through the softener system, the ions forming the hardness are removed from the water and the water reaches the softness required to obtain the best washing result. Depending on the level of hardness of the inflowing water, these ions that harden the water accumulate rapidly inside the softener system. Therefore, the softener system has to be refreshed so that it operates with the same performance also during the next wash. For this purpose, dishwasher salt is used.

Machine can only be used by special dishwasher salt to soften the water. Do not use any small grained or powdered type of salts which can easily soluble. Using any other type of salt can damage your machine.

Fill the salt (IF AVAILABLE)
To add softener salt, open the salt compartment cap by turning it counter clockwise. (1) (2) At first use, fill the compartment with 1 kg salt and water (3) until it is almost overflowing. If available, using a funnel (4) will make filling easier. Replace the cap and close it. After every 20-30 Cycles add salt into your mach until it fills up (approx. 1 kg).

Only add water to the salt compartment on first use.
Use softener salt specifically produced for use in dishwashers. When you start your dishwasher, the salt compartment is filled with water, therefore put the softener salt in prior to starting your machine. If the softener salt has overflowed and you do not start the machine immediately, run a short washing program to protect your machine against corrosion.

Test Strip

NOTE:
The level is set to 3 as default. If the water is well water or has a hardness level above 90 dF, we recommend that you use filter and refinement devices.

Water Hardness Table

Level| German dH| French dF| British dE| Indicator
---|---|---|---|---
1| 0-5| 0-9| 0-6| L1 is seen on the display.
2| 6-11| 10-20| 7-14| L2 is seen on the display.
3| 12-17| 21-30| 15-21| L3 is seen on the display.
4| 18-22| 31-40| 22-28| L4 is seen on the display.
5| 23-31| 41-55| 29-39| L5 is seen on the display.
6| 32-50| 56-90| 40-63| L6 is seen on the display.

Water Softener System
The dishwasher is equipped with a water softener which reduces the hardness in the mains water supply. To find out the hardness level of your tap water, contact your water company or use the test strip (if available).

Setting

• Turn on the machine by pressing the On/Off button.
• Press the Program button for at least 3 seconds immediately after the machine is turned on.
• Release the Program button when “SL” is shown. Next, the last setting level is displayed.
• Press the program button to set the desired level. Each press of the program button increases the level. Once level 6 has been reached, the next press returns the level to 1.
• The last selected water hardness level is stored in the memory by turning the machine off with the On/Off button.

Detergent usage
Only use detergents specifically designed for domestic dishwashers. Keep your detergents in cool, dry places out of reach of children.

Add the proper detergent for the selected program to ensure the best performance. The amount of detergent needed depends on the cycle, load size, and soil level of dishes.
Do not fill detergent into the detergent compartment more than required; otherwise, you can see whitish streaks or bluish layers on glass and dishes and may cause glass corrosion. Continued use of too much detergent may cause machine damage. Using little detergent can result in poor cleaning and you can see whitish streaks in hard water.

See the detergent manufacturer’s instructions for further information.

Filling the detergent
Push the latch to open the dispenser and pour in the detergent.

Close the lid and press it until it locks in place. The dispenser should be refilled just before the start of each program. If the dishes are heavily soiled, place additional detergent in the pre-wash detergent chamber.

Using combined detergents
These products should be used according to the manufacturer’s instructions.

Never put combined detergents into the interior section or the cutlery basket. Combined detergents contain not only the detergent but also rinse-aid, salt replacement substances and additional components depending on the combination. We recommend you do not use combined detergents in short programmes. Please use powder detergents instead. If you encounter problems when using combined detergents, please contact the detergent manufacturer. When you stop using combined detergents, make sure that water hardness and rinse aid settings are set to the correct level.

Rinse-aid usage
The rinse aid helps to dry the dishes without streaks and stains. Rinse-aid is required for stain-free utensils and clear glasses. The rinse aid is automatically released during the hot rinse phase. If rinse aid dosage setting set too low, whitish stains remain on dishes and dishes do not dry and washed clean.
If rinse aid dosage setting set too height, you can see bluish layers on glass and dishes.

Filling the rinse aid and setting
To fill the rinse-aid compartment, open the rinse-aid compartment cap. Fill the compartment with rinse aid to the MAX level and then close the cap. Be careful not to overfill the rinse aid compartment and wipe up any spills.

In order to change the rinse aid level, follow the below steps before turning on the machine:

• Push the program button and hold it down.
• Turn the machine on.
• Hold down the program button until “rA” disappears from the display. The rinse aid setting follows the water hardness setting.
• The machine will display the last setting.
• Set the level by pushing the program button.
• Switch off the machine to save the setting.
• The factory setting is “4”.

If the dishes are not drying properly or are spotted, increase the level. If blue stains form on your dishes, decrease the level.

LOADING YOUR DISHWASHER

For best results, follow these loading guidelines. Loading the household dishwasher up to the capacity indicated by the manufacturer will contribute to energy and water savings. Manual pre-rinsing of tableware items leads to increased water and energy consumption and is not recommended You can place cups, glasses, stemware, small plates, bowls, etc. in the upper basket. Do not lean long glasses against one another or they cannot remain steady and may receive damage. When placing long-stem glasses and goblets, lean them against the basket edge or rack and not against other items.

Place all containers such as cups, glasses, and pots into the dishwasher with the opening facing downwards otherwise, water can collect on items. If there is a cutlery basket in the machine, you are recommended to use the cutlery grid in order to obtain the best result. Place all large (pots, pans, lids, plates, bowls, etc.) and very dirty items in the lower rack.

Dishes and cutlery should not be placed above each other.

• WARNING: Take care not to obstruct the rotation of spray arms.
• WARNING: Make sure after loading the dishes do not prevent opening the detergent dispenser.

Recommendations
Remove any coarse residue on dishes before placing the dishes in the machine. Start the machine with a full load.

• Do not overload the drawers or place dishes in the wrong basket.
• WARNING: To avoid any possible injuries, place long-handle and sharp-pointed knives with their sharp points facing down or horizontally on the baskets.

Height Adjustable Rack (peg type)
The height-adjustable racks enable glasses and cups to be placed on or under the racks. The racks can be adjusted to 2 different heights. Cutlery and utensils can also be placed on the racks horizontally.

7)Upper Cutlery Basket
The upper cutlery basket is designed for the placement of large and small cutlery and utensils.

WARNING:
Knives and other sharp objects must be placed horizontally in the cutlery basket.

Height adjustment
The upper basket includes a mechanism that enables the height of the basket to be adjusted up (1) or down (2) without having to remove the basket. Hold the basket on both sides and pull it up or push it down, ensuring both sides of the upper basket are in the same position.

Alternative Basket Loads Lower Basket

Top basket

Incorrect loads

PROGRAMMING

soiled dishes requiring hygienic washing.

Level of Soil:| Light| Light| Medium| Medium| Heavy| Heavy
Amount of Detergent:

A: 25 cm3

B: 15 cm3”

| –| A| A| A| A| A
Program Duration (h:min)| 00:15| 00:30| 03:41| 00:50| 01:57| 02:07
Electiricity consumption (kWh/cycle)| 0.020| 0.740| 0.937| 1.100| 1.700| 1.900
Water consumption (l/cycle)| 4.5| 12.4| 9.0| 12.0| 17.2| 16.0

• The program duration may change according to the amount of dishes, the water temperature, the ambient temperature and selected additional functions.
• Values given for programmes other than the eco programme are indicative only.
• Eco programme is suitable to clean normally soiled tableware, that for this use, it is the most efficient programme in terms of its combined energy and water consumption, and that it is used to assess compliance with the EU ecodesign legislation.
• Washing tableware in a household dishwasher usually consumes less energy and water in the use phase than hand dishwashing when the household dishwasher is used according to the manufacturer’s instructions.
• Only use powder detergent for short programs.
• Short programs do not include drying.
• To assist drying, we recommend slightly opening the door after a cycle is complete.
• You can access the product database where the model information is stored by reading the QR code on the energy label.
• NOTE: According to regulations 1016/2010 and 1059/2010, Eco program energy consumption values may differ. This table is in line with regulations 2019/2022 and 2017/2022

THE CONTROL PANEL

1. On/Off Button

2. Program Selection Button

   • 2.1. Program Indicators

3. Delay Button

   • 3.1. Delay Indicator

4. Remaining Time Indicator

5. Energy Save Button

   • 5.1. Energy Save Indicator

6. Half Load Button

   • 6.1. Half Load Indicator

7. Start/Pause Button

8. Rinse Aid Indicator

9. Salt Indicator

10. Washing Step Indicators

    • a- Washing Step Indicator
    • b- Rinse Step Indicator
    • c- Drying Step Indicator
    • d- End Step Indicator

11. On/Off Button
    Switch the machine on by pressing the On/Off button.

12. Program Selection Button
    Select a suitable programme by pressing Program Selection button. The selected program indicator (2.1) will be on. For the details of the programs refer to section Program Table.

13. Delay Button
    You can delay the start time of the programme for 1-2…24 hours by pressing the Delay button before the programme starts. To activate the delay time, press Start/Pause button (7). The delay indicator (3.1) will be on. If you want to change the delay time, first press the Start/Pause button (7) and then the delay button to select a new delay time. To activate the new delay time, press the Start/Pause button (7) again. To cancel the delay, you need to switch to 0 hour by pressing the Delay button.

14. Remaining Time Indicator
    Programme flow can be monitored via the Wash, Rinse, Dry, End indicators (10) and Remaining Time Indicator.

15. Energy Save Button
    Press the Energy Save button to activte the Energy Save option. Energy Save indicator (5.1) will be on. Select the Energy Save option to enable the door of the machine to open at the end of the programme to increase drying efficiency. This function also saves energy by operating at a lower temperature.

16. Half Load Button
    Thanks to the half load function in your machine, you can shorten the durations of the programmes that you have selected and reduce the energy and water consumption by using half load electricity and water. Half Load indicator (6.1) will be on.

17. Start/Pause Button
    Press the Start/Pause button to start the selected programme. The wash led turns on and the Remaining Time Indicator shows the programme duration. It also indicates the remaining time during the programme flow. If you open the door of your machine when the programme is running the duration of the programme pauses, and related washing step indicator blinks.

18. Rinse Aid Indicator
    When the rinse aid level is low, the rinse aid lack warning indicator turns on and you should fill the rinse aid chamber.

19. Salt Indicator
    When there is insufficient softening salt, the salt lack warning indicator turns on and you should fill up the salt chamber.

20. Washing Step Indicators
    You can monitor the programme flow with the Washing Step Indicators on the control panel. While the Dry indicator is on, the machine remains silent for about 15-50 minutes with respect to the flow of the prog-ram you have selected.

• Wash
• Rinse
• Dry
• End

NOTE:

• NOTE: Child lock is activated/deactivated by pressing the Energy Save button (5) for about 3 seconds. When it is activated, all leds blink and “CL” is shown on the Remaining Time Indicator (4) once. When it is deactivated, all leds and “CL” blink twice.
• NOTE: To save any program as a favorite program, press the Program (2) and Delay (3) buttons at the same time. To select your favorite program, press the Program (2) button for 3 seconds.
• NOTE: If an extra option has been used on the latest washing program, this option will remain active on the newly selected program until the machine turns off. To cancel this option on the newly selected wash program, press the related option button.

Changing a program
If you would like to change the program when the machine is already running.

Cancelling a program
If you would like to cancel a program when it is running.

Switching the Machine Off

• NOTE: Do not open the door before the programme ends.
• NOTE: At the end of the washing programme, you can leave the door of your machine ajar to hasten the drying.
• NOTE: If the door of the machine is opened or power is cut off during washing, the programme will continue when the door is closed or the power is restored.

Buzzer Sound Control (Model Depending)
To change the buzzer sound level, follow the below steps:

1. Open the door and press Half Load (6) and Energy Save (5) buttons at the same time for 3 seconds.
2. When sound setting is recognized, buzzer gives a long sound and machine will display last set level, from “S0” to “S3”.
3. To decrease sound level press Energy Save button (5). To increase sound level, press Half Load button (6).
4. To save the selected sound level, turn off the machine. ’’S0’’ level means all voices are off. Factory setting is “S3”.

Save Power Mode
To activate or deactivate save power mode, follow the below steps:

1. Open the door and press Program (2) and Half Load (6) buttons at the same time for 3 seconds.
2. After 3 seconds, the machine will display last Setting, “IL1” or “IL0”.
3. When Save Power Mode is activated, “IL1” will be displayed. On this mode, interior lights (if avaliable) will turn off 2 minutes after the door is opened, and the machine will turn off automatically 15 minutes after any intervention in order to save energy.
4. When Save Power Mode is deactivated “IL0” will be displayed. If Save Power Mode is deactive, interior lights will be on as long as the door is open, and the machine will always be on unless it is turned off by user.
5. To save the selected setting, turn off the machine. In factory setting, Save Power Mode is active.

CLEANING AND MAINTENANCE

Cleaning your dishwasher is important to maintain the machine’s service life Make sure that the water softening setting (If available) is done correctly and the correct amount of detergent is used to prevent limescale accumulation. Refill the salt compartment when the salt sensor light comes on.

Oil and limescale may build up in your Dishwasher over time. If this occurs:

• Fill the detergent compartment but do not load any dishes. Select a program that runs at high temperature and run the Dishwasher empty. If this does not clean your Dishwasher sufficiently, use a cleaning agent designed for use with dishwashers.
• To extend the life of your dishwasher, clean the appliance regularly on each month
• Wipe the door seals regularly with a damp cloth to remove any accumulated residue or foreign objects.

Filters
Clean the filters and spray arms at least once a week. If any food waste remains or foreign objects on the coarse and fine filters, remove them and clean them thoroughly with water.

• a) Micro Filter
• b) Coarse Filter
• c) Metal Filter

To remove and clean the filter combination, turn it counter clockwise and remove it by lifting it upwards (1).Pull the coarse filter out of the micro filter (2).Then pull and remove the metal filter (3).Rinse the filter with lots of water until it is free of residue. Reassemble the filters. Replace the filter insert, and rotate it clockwise (4).

• Never use your dishwasher without a filter.
• Incorrect fitting of the filter will reduce the washing effectiveness.
• Clean filters are necessary for proper running of the machine.

Spray arms
Make sure that the spray holes are not clogged and that no food waste or foreign object is stuck to the spray arms. If there is any clogging,remove the spray arms and clean them under water. To remove the upper spray arm undo the nut holding it in position by turning it clockwise and pulling it downwards. Make sure that the nut is properly tightened when refitting the upper spray arm.

Drain Pump
Large food residues or foreign objects which were not captured by the filters may block the waste water pump. The rinsing water will then be above the filter.

Warning Risk of cuts!
When cleaning the wastewater pump, ensure that you do not injure yourself on pieces of broken glass or pointed implements.

In this case:

1. First always disconnect the appliance from the power supply.
2. Take out baskets.
3. Remove the filters.
4. Scoop out water, use a sponge if required.
5. Check the area and remove any foreign objects.
6. Install filters.
7. Re-insert baskets.

TROUBLESHOOTING

The programme does not start.

| Your Dishwasher is not plugged in.| Plug your Dishwasher in.
Your Dishwasher is not switched on.| Switch your Dishwasher on by pressing the On/Off button.
Fuse blown.| Check your indoor fuses.
Water inlet tap is closed.| Turn on the water inlet tap.
Your Dishwasher door is open.| Close the Dishwasher door.
Water inlet hose and machine filters are clogged.| Check the water inlet hose and machine filters and make sure they are not clogged.

Water remains inside the machine.

| Water drain hose is clogged or twisted.| Check the drain hose, then either clean or untwist it.
The filters are clogged.| Clean the filters.
The programme is not finished yet.| Wait until the programme is finished.

Machine stops during washing.

| Power failure.| Check mains power.
Water inlet failure.| Check water tap.
Shaking and hitting noises are heard during a wash operation.| The spray arm is hitting the dishes in the lower basket.| Move or remove items blocking the spray arm.
Partial food wastes remain on the dishes.| Dishes placed incorrectly, sprayed water not reaching affected dishes.| Do not overload baskets.

Dishes leaning each another.

| ****

Place dishes as instructed in the section on loading your dishwasher.

Not enough detergent used.| Use the correct amount of detergent, as instructed in the programme table.
Wrong wash programme selected.| Use the information in the programme table to select the most appropriate programme.
Spray arms clogged with food waste.| Clean the holes in the spray arms with thin objects.
Filters or water drain pump clogged or filter misplaced.| Check the drain hose and filters are correctly fitted.
Whitish stains remains on dishes.| Not enough detergent used.| Use the correct amount of detergent, as instructed in the programme table.
---|---|---
Rinse aid dosage and/or water softener setting set too low.| Increase rinse aid and/or water softener level.
High water hardness level.| Increase water softerner level and add salt.
Salt compartment cap not closed properly.| Check that the salt compartment cap is closed properly.
Dishes do not dry.| Drying option is not selected.| Select a programme with a drying option.
Rinse aid dosage set too low.| Increase rinse aid dosage setting.
Rust stains form on the dishes.| The Stainless-steel quality of the dishes is insufficient.| Use only dishwasher-proof sets.
High level of salt in wash water.| Adjust the water hardness level using water hardness table.
Salt compartment cap not closed properly.| Check that the salt compartment cap is closed properly.
Too much salt spilled in the Dishwasher while filling it with salt.| Use funnel while filling salt to the compartment to avoid spillage.
A poor mains grounding.| Consult a qualified electrician immediately.
Detergent remains in the detergent compartment.| Detergent was added when the detergent compartment was wet.| Make sure the detergent compartment is dry before use.

AUTOMATIC FAULT WARNINGS AND WHAT TO DO

flowing
Separate the inlet hose from the tap and clean the filter of the hose.
Contact for service if the error continues.
F3| Continuous water input| Close the tap and contact for service.
F2| Inability to discharge water| Water discharge hose and filters may be clogged.
Cancel the program.
If the error continues, contact for service.
F8| Heater error| Contact for service.
F1| Overflow| Unplug the machine and close the tap.
Contact for service.
FE| Faulty electronic card| Contact for service.
F7| Overheating| Contact for service.
F6| Faulty heater sensor| Contact for service.

The installation and repair procedures should always be carried out by the Authorised Service Agent in order to avoid possible risks. The manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons. Repairs may be carried out by technicians only. If a component has to be replaced, ensure that only the original spare parts are used.

Improper repairs or use of non-original spare parts may cause considerable damage and put the user at considerable risk. Contact information for your customer service can be found on the back of this document. Function-relevant genuine spare parts according to the corresponding Ecodesign order can be obtained from Customer Service for a period of at least 10 years from the date on which your appliance was placed on the market within the European Economic Area.

https://daewooelectronics.com/.

References

• Daewoo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>