Justice JSE40062WM LED Watch Instructions
- September 5, 2022
- Justice
Table of Contents
Justice JSE40062WM LED Watch
LED Watch Instructions
Function
- Under normal time display mode,
- LED watch show: Hours, Minutes
- Can set: Years, Months, Dates.
- perate push button
Setting the Time and Date
- Push button one time, will show hour, minute.
- Push button for 2 seconds, the watch will enter setting mode.
- Push the button for 2 second, setting Hours, morning means “A”, afternoon means “P”
- Push button for 2 second,setting Minute
- Push button for 2 second, setting Year
- Push button for 2 second, setting Month
- Push button for 2 second, setting Date
When finish the setting mode, no push button for 2 seconds, will become the
time display mode will become standby mode after 2 seconds
Battery:1 X Maxell CR2016(3V)
- DO NOT MIX OLD AND NEW BATTERIES
- DO NOT MIX ALKAUNE,STANDARD(CARBON-ZINC)
- OR RECHARGEABLE(NICKEL-CADMIUM)BATTERIES.
- DO NOT IMMERSE IN WATER
- DO NOT WEAR IF CASEBACK IS MISSING OR
DISASSEMBLED
Removing the Band from Your Watch:
Lay your watch with the face down (preferably on a cloth to prevent scratching
your watch)
You will need a sharp point or “spring bar tool” to perform the following
steps.
Changing Your Strap on your Watch:
- Insert the sharp point between the strap and watch lug to release the strap from case.
- Once the spring bar is detached you can remove your strap. To reattach, depress the spring bar and insert into hole on the inside of the watch case lug.
Read User Manual Online (PDF format)
Loading......