noodoe EV C100 Cable Management System User Manual
- June 10, 2024
- noodoe EV
Table of Contents
noodoe EV C100 Cable Management System
Product Information
The product is identified as C100 and the user manual version is 1.0. The manufacturer reserves the right to make changes to the product without further notice. The package includes the following parts:
- M4*12 Cross recessed binding head screws – 2 units
- M4 Spring washers – 2 units
- M4 Plain washers – 2 units
- Charging cable
Customers are advised to visit the official website at www.noodoe.com /install-accessories to obtain the latest version of the user manual before installation.
Product Usage Instructions
- Before installation or usage, refer to the latest version of the user manual available on www.noodoe.com/install-accessories.
- Use the provided M4*12 Cross recessed binding head screws to attach the product securely to the desired surface or location.
- Prior to screwing in the screws, use the M4 Spring washers and M4 Plain washers to ensure proper fastening and to prevent damage or instability to the product.
- To charge the product, connect one end of the charging cable to the product and the other end to a power source.
- Ensure that the charging cable is compatible with the product before charging.
- Follow recommended charging time and do not overcharge the product.
- If there are any issues or concerns with the product, refer to the troubleshooting section of the user manual or contact customer support for assistance.
OVERVIEW
| No. | Part | Name of Part | Unit |
|---|
1
| |
M4*12 Cross recessed binding head screws
|
2
2
| |
M4 Spring washers
|
2
3
| |
M4 Plain washers
|
2
INSTRUCTION
Please visit the official website to obtain the latest version of the user
manual before installation.
www.noodoe.com/install-accessories
[email protected]
COPYRIGHT © 2022 Noodoe Corporation reserves the right to make changes to this
product without further notice.
Version 1.0