COMAOGO B0BWMSDQ6X Mini Movie Portable Projectors User Manual

June 10, 2024
COMAOGO

COMAOGO B0BWMSDQ6X Mini Movie Portable Projectors

Product Information

The projector supports various file system formats such as FAT (FAT 16, FAT32) and NTFS. It can also support up to 2TB of storage capacity for U disk, hard disk, SD card, and TF card. The supported video formats include MPEG1, MPEG2, MPEG4, MP4, RM, AVI, RMVB, MOV, MKV, DIVX, VOB, and M-JPEG, and it can support up to 1080P. The audio formats supported are MP3/WMA/ASF/OGG/AACWAV, while the image formats supported are JPEG, BMP, and PNG.

Product Usage

To use the projector, follow these steps:

  1. Connect the projector to a power source.
  2. Connect your storage device such as U disk, hard disk, SD card or TF card to the projector.
  3. Select the picture, movie or music menu on the projector desktop.
  4. Select the content that you want to project.
    Note that the supported file system formats for your storage device are FAT (FAT 16, FAT32) and NTFS. Also, the maximum supported capacity for your storage device is 2TB. Ensure that your files are in the supported format listed above to be able to project them using the projector.

Please read this manual carefully before using this product.

SAFETY NOTICE

  • Please read the user manual carefully before using the projector.
  • Please use the same power voltage with the projector marked.
  • Please do not disassemble the projector by yourself, otherwise we will not provide free warranty service.
  • Please do not look into the lens when the projector is working, otherwise it will damage your eyes easily.
  • Please do not cover the projector ventilation hole with cloth, carpet and other materials.
  • Please keep the projector away from the rain, water or any other liquid as it is not waterproof.
  • Please do not put the projector under the rain or moisture to avoid electric shock.
  • Turn off the power, if you do not use the projector for a long time.
  • Please use the original packing foam or other anti-shock material when moving the projector.
  • If a fault should occur during operation of the unit, switch
  • the power supply off or disconnect the power plug and disconnect the device.
  • Use only a qualified ceiling mount kit to install the projector and ensure it is securely installed. It is recommended to use M6 screws for installation.
  • Please contact us for help firstly if the projector has any problem.
  • E-mail: COMAOGO@outlook.com

PACKING LIST

PRODUCT INTRODUCTION

QUICK START

  • STEP 1: Connect the power cable into the projector.
  • STEP 2: Connect your device to the projector.
  • STEP 3: Press the power button to turn on.
  • STEP 4: Adjust projector height, keystone and focus for best picture quality.
  • STEP 5: C lick the S (source) button to select the input signal*.
  • STEP 6: Turn off the projector after use.

SIGNAL SOURCE

  • Depending on the device, click the S (source) button to select the signal corresponding to the input.
  • Insert the storage device, and the device content can be directly read through the desktop menu.
    1. If the DVD supports HDMI connection, you can use HDMI cable and select HDMI input.
    2. If the desktop supports HDMI connection, you can use HDMI cable and select HDMI input.

LAPTOP COMMUNICATION

  • STEP 1: Select the incuded HDMI cable and connect the HDMI port of the laptop to the projector.
  • STEP 2: Tum on the projector, click the S (Source) button to select HDMI input.
  • STEP 3: Projection playback is available. If the projector has no sound, select MStar Demo as the default audio output for the I laptop.

ANDROID DEVICE CONNECTION

  • STEP 1:
    • You need to prepare an additional USB Type C to HDMI Adapter Cable.
    • Connect the adapter cable to the HDMI and USB ports of the projector, and then connect the Type C plug to the Android device.
  • STEP 2: Click the S key (Source) to enter and select HDMI mode.
  • STEP 3:
    • Some mobile phones can be used directly without installing an APP.
    • After the mobile phone is linked, follow thE ~ prompts to download and install the APP and set it up, then you ec1n start using the projector.
      *Some Type C to HDMI Adapter Cables are self-powered and do not need to be plugged into the USB port.

IOS DEVICE CONNECTION – IPHONE & IPAD

  • STEP 1:
    • You need to prepare an additional USB Type C to HDMI Adapter Cable.
    • Connect the adapter cable to the HDMI and USB ports of the projector, and then connect the Type C plug to the Android device.
  • STEP 2: Click the S key (Source) to enter and select HDMI mode.
  • STEP 3: After the mobile phone is connected, wai1 for a while and a trust window will pop up on the smart device interface, pleasf~ click Trust and enter the password.

IOS DEVICES CONNECTION – MACBOOK

  • STEP 1:
    • If your Macbook has an HDMI port, you can connect the projector directly with the included HDMI cable.
    • If your MacBook does not have an HDMI port, you need to prepare an additional Type-C or Mini DisplayPort to HDMI Adapter.
    • Connect the projector to the Macbook.
  • STEP 2: Click the S key (Source) to enter and select HDMI mode.
  • STEP 3: After connecting, please wait for a while, the interface will pop up the trust window, please click trust and enter the password.
    Note: If the projector doesn’t play MacBook sound properly, Please choose MStar Demo ( HDMI) as the default sound output on your MacBook

TV STICK/BOX CONNECTION

  • STEP 1: Plug the TV stick into the projector’s HDMI port.
  • STEP 2: Click the S key (Source) to enter and select HDMI mode.
  • STEP 3: Turn off the Dolby Digital output o1 the device if you have no sound.

REMOVABLE STORAGE DEVICES

  • STEP 1: Connect the device to the projector port (USB or SDTF card slot).
  • STEP 2: After connection, directly select the picture, movie or music menu on the projector desktop to project the content in the storage device.

Note :

  1. The supported file system formats of U disk, hard disk, SD card and TF card are: FAT (FAT 16, FAT 32) and NTFS.The maximum supported capacity is 2TB.
  2. Supported formats are as follows:
    Video Format .MPEG1, MPEG2, MPEG4, MP 4 , RM, AVI, RMVB , MOV, MKV, DIVX, VOB, M- JPEG. (Support up to 1080P) Audio Format: MP3/WMA/ ASF /OGG / AACWAV. Image Format: JPEG, B MP, PNG.

Game Console Connection

PS, Xbox, Switch, etc.
  • STEP 1: Connect the device to the projector’s HDMI port using the included HDMI cable.
  • STEP 2: Click the S key (Source) to enter and select HDMI mode.
  • STEP 3: If the projector cannot play sound, select PCM as the audio output on the device.

Other Device Connections

AV Connection
If your DVD supports HDMI output, please use the included HDMI cable to connect and change the output mode to HDMI.

VGA connection
If your desktop computer supports HDMI output, please use the included HDMI cable to connect and change the output mode to HDMI.

Audio Connection
After connecting the headphones, iadjust the volume to an appropriate level to protect your hearing.

Basic Operation

  1. Focus & Keystone

  2. Adjust the suitable height through the bottom knob.

  3. Rotate the lens to get the image in focus and have the best picture quality.

  4. Rotate the keystone to get horizontal projection screen.

  5. Projection Modes
    Click the M (Menu) button, select Picture-Projection Mode, and choose the projection mode according to your needs.

  6. Projection Distance & Size

    • The optimal projection distance is 1.5m-3.5m.
    • For the best picture effect, it is recommended to directly project on a white wall, and ordinary projection screens are only recommended for outdoor use.

BASIC SETTING

Click the M (MENU) button or cick from the “DESKTOP – SETTING” to enter the basic setting interface.

  1. Picture Settings

  2. Picture Mode
    The system defaults to Standard mode, you can also set Contrast, Brightness, Color, Tint, Sharpness in USER mode.

  3. Color Temperature
    Switch the color temperature to Standard, Warm, and Cool to suit different uses. Warm colors are suitable for movies and cool colors are suitable for image display.

  4. Noise Reduction
    Limited by the difference in the quality of the input signal source, it is recommended to set it to medium noise reduction to obtain a balanced display effect.

  5. Sound Settings

    • Set the Sound Mode for Standard, Movie, Music, Sports and User in Sound Mode. You can set treble, bass in user mode.
    • Due to the difference in the quality of the input signal source, it is recommended to set it to standard for a balanced sound.
  6. Option Settings

  7. OSD Language
    Support 8 language settings.

  8. Aspect Ratio
    This version does not support scaling and is fixed at 16:9.

  9. Projecion Mode
    Applicable to different projector fixing methods, please refer to the Projection Modes chapter on page 13.

  10. Factory Reset
    To reset the projector, select Factory reset.

  11. Software Upgrade and Version
    We do not recommend users to upgrade and modify the system by themselves. For software updates, please contact customer service before updating (page 16).

MAINTENANCE GUIDE

  1. Projector maintenance

  2. Do not disassemble the projector by yourself, otherwise we cannot provide after-sales service;

  3. The projector is not waterproof, please keep it away from any liquid;

  4. When using the projector, please do not block the vents on both sides;

  5. Lens maintenance

  6. For daily use, please keep the lens clean.

  7.  When the lens needs to be cleaned, please use a dust-free cloth.

  8. Quick guide to clean the dirt spot on the screen
    Due to environmental reasons, dust may be deposited on the surface of the LCD screen. If there are dirty spots on the projector screen, try the following.

  9. Open the dedusting hole under the projector. (The location of the dedusting hole will be different for different models, if you have any questions, please contact us)

  10. Insert the cotton swab into the projector LCD Part.

  11. Move the cotton swab to the dirt spot part and wipe it gently.

ANY QUESTIONS, PLEASE CONTACT US.

  • SHENZHEN RONGCHUANG YOUPIN ELECTRONIC COMMERCE CO., LTD.
  • Address: 201, Bldg. A, Wisdom Cloud Valley, No. 1 Sanhe Rd., Gaofeng
  • Community, Dalang St.Longhua Dist, Shenzhen
  • E-mail: COMAOGO@outlook.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals