CPN 025020 Zuri 2 In 1 Activity Centre Instruction Manual
- June 4, 2024
- CPN
Table of Contents
025020 Zuri 2 In 1 Activity Centre
Instruction Manual
IMPORTANT:
RETAIN FOR FUTURE REFERENCE, READ CAREFULLY
SAFETY PRECAUTIONS
Read all instructions before assembly and use of the activity centre.
Keep instructions for future use.
WARNING
BEFORE ASSEMBLING THIS ACTIVITY CENTRE, READ AND UNDERSTAND THE INSTRUCTIONS.
KEEP INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE.
Never leave a child unattended.
Always keep the child in view whilst in the activity centre.
Only use on flat surfaces free of objects that could cause the activity centre
to tip over.
To avoid burns, keep the child away from hot liquids, ranges, radiators, space
heaters and fireplaces etc.
Do not use the activity centre if it is damaged or broken.
Do not use it until the baby can sit up by itself. Discontinue seated use mode
when the child begins to walk.
Remove packaging from the activity centre vicinity after assembly.
Use only accessories as recommended by the supplier.
Check that the item is assembled correctly before use.
This item is designed for use by a child 6 months + and up to 12 kgs.
This activity centre should not be used by a child who cannot sit up unaided.
Promptly replace any worn-out or broken parts.
The activity centre should not be carried with a child in it.
Keep medication, strings, elastics and small toys out of reach from any
position of the activity centre.
WARNING
FALL HAZARD
Babies can FALL from products resulting in head injuries.
- NEVER leave your child unattended. ALWAYS keep the child in view while in the product.
- NEVER use near stairs.
- To avoid tip-over, use the product on a flat, level surface.
STRANGULATION HAZARD
Strings can cause STRANGULATION.
- DO NOT place items with a string around the child’s neck, such as hood strings or pacifier cords.
- DO NOT suspend strings over products or attach strings to toys.
Battery Safety Information
In exceptional circumstances, batteries leak fluids that can cause a chemical
burn injury or ruin your product. To avoid leakage:
- DO NOT mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
- Insert batteries as indicated inside the battery compartment.
- Remove batteries during long periods of non-use.
- ALWAYS remove exhausted batteries from the product.
- Dispose of batteries safely.
- DO NOT dispose of this product in a fire. The batteries inside may explode or leak.
- Never short-circuit the battery terminals.
- Use only batteries of the same equivalent type, as recommended.
- DO NOT charge non-rechargeable batteries.
- Remove rechargeable batteries from the product before charging.
- If removable, rechargeable batteries are used, they are only to be charged under adult supervision.
CONGRATULATIONS
Congratulations on your purchase of the Zuri 2-in-1 Activity Center
This product has been designed and developed with safety, comfort and
functionality in mind. Please take the time to read this manual carefully
before using this product and keep it in a safe place for future reference.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your Zuri 2-in-1 Activity Center
Due
to variations in the style and design of our products, the photographs and
illustrations shown in this instruction manual are generic, therefore product
fabrics, colour and design may vary from the images shown. CNP Brands reserves
the right to alter product specifications without notice as a result of our
ongoing policy of product improvement.
ASSEMBLY CONTENTS
Check what you have received…
You have received 1 box. Please check the contents of the box against the
list below. If anything is missing, please contact Customer Service.
In Australia, contact CNP Brands on 1300 667 137 , in New Zealand contact
Wainhouse Distribution on 0800 567 5000.
Supplied loose in the box:
Supplied loose in the box continued: Not
Supplied:
There are no accessories recommended for use with this Activity Centre.
ASSEMBLY / OPERATING INSTRUCTIONS
To Assemble Activity Centre Mode …
-
1a. Lay the Top Tray face down.
-
2a. Insert each Leg into the underside of the tabletop.
NOTE: Ensure the pop-pin correctly clicks into position.
-
3a. Insert the Seat into the opening in the Top Tray and press down firmly until the Seat is secure.
3b. Rotate the Seat to ensure the swivel function is working correctly. -
4a.To remove the Seat, use the edge of the Seat to lift it up and away from the Top Tray.
-
5a. Pinch and pull out the 3 x attachment webbing straps from the underside of the Top Tray and the Bottom Tray.
5b. Align the pointed side of the Bottom Tray with the front of the Top Tray. 
5c. Attach the metal clip of the Bottom Tray webbing to the loop of the Top Tray webbing.
5d. Repeat this step for the remaining 2 x webbing straps. NOTE: Ensure the 3 x webbing straps are always used on the same height setting. -
6a. There are 3 x height adjustment settings.
6b. To adjust the height of the Bottom Tray, un-hook the metal clip and fix it to the next height setting.
NOTE: The child’s feet should comfortably rest on the Bottom Tray during use.
To assemble Toys…
-
1a. Place toys on the Top Tray in the order shown.
(From left to right):
– Toy Tray
– Rocket Toy
– Spindle & Rings Toy
– Toy Bar
– Mirror Toy
NOTE: The position of the toys is not interchangeable.
-
2a. Using a Phillips Head Screwdriver (not supplied), unscrew the battery compartment cover on the Toy Tray and insert 3 x AAA Batteries (not supplied). 2b. Re-secure the battery compartment cover.
2c. Place the Toy Tray back on the Top Frame and secure it by twisting the 2 x tabs on the underside of the Top Frame.
2d. Secure the remaining Toys to the Top Tray. -
3a. To activate the Toy Tray, after inserting the batteries, turn on the unit with the ON/OFF switch on the side of the Tray.
The Activity Centre is now ready for use.
To convert to PlayTable Mode…
-
1a. Un-hook the Bottom Tray from the webbing straps of the Top Tray.
1b. Secure the Bottom Tray Straps on the underside of the Bottom Tray. -
2a. Remove the seat from the Activity Centre.
-
3a. Secure the Top Tray straps to the underside of the top Tray.
3b. Place the Bottom Tray onto the Top Tray and push down until all tabs secure correctly. The Play Table Mode is now ready for use.
3c. To remove the Top Tray, apply pressure to the edges of the Bottom Tray from underneath until the Tray is released.
To disassemble…
- 1a. Remove the Seat and Toys from the Top Tray.
1b. Remove the Bottom Tray from the Activity Centre webbing straps.
1c. Remove Legs from the Top Tray by pressing the pop-pin whilst pulling the leg away from Top Tray.
To remove Seat Pad…
- 1a. Pull all of the seat tabs down and away from the holding pins.
1b. Remove the Seat Pad from the Seat.
To assemble Seat Pad…
- 1a. Place the Seat Pad inside the Seat ring.
Ensure the warning label is toward the backrest of the seat ring.
1b. Fold the Seat Pad sides over the Seat Ring and secure the seat tabs onto the holding pins.
HOW TO CARE FOR YOUR BEBECARE PRODUCT
Cleaning
This product has been designed and developed with safety, comfort and
functionality in mind. Please take the time to read this manual carefully
before using this product and keep it in a safe place for future reference.
To ensure the long-lasting use of your Activity Centre, do not use abrasive
cleaners. Always store products in a clean dry place.
Seat Pad: Remove from the frame. Hand wash with cold water. No bleach.
Toy and snack tray: Wipe clean with a damp cloth and mild soap. Air dry.
Do not immerse in water.
Frame: Wipe the frame with a soft, clean cloth and mild soap.
Maintenance
Always check parts regularly for tightness of screws, nuts and other fasteners
– tighten or replace if required. To maintain the safety of your Activity
Centre, seek prompt repairs for bent, torn, worn or broken parts. Use only
those parts and accessories approved by CNP Brands.
If you have any difficulties in assembling the Activity Centre, please contact
our Service Department.
In Australia, contact CNP Brands on 1300 667 137 , in New Zealand contact
Wainhouse Distribution on 0800 567 5000.
Warranty
For all warranty terms and conditions, please visit cnpbrands.com.au
ABOUT US
About CNP Brands
Currently, CNP Brands boasts one of the most diverse brand portfolios with a
combination of company-owned brands and distribution agreements.
Our own brands, including Childcare, have gone from strength to strength in
recent years. Childcare, and our premium brand Bebe care, demonstrate our
commitment to quality and continuing investment in product development.
Distributed in Australia by CNP Brands
82 Maribyrnong Street, Footscray, VIC, 3011
Customer Service 1300 667 137
W: www.cnpbrands.com.au
E: info@cnpbrands.com.au
F: www.facebook.com/CNPBrands
I: @cnp_baby| Distributed in New Zealand by Wainhouse Distribution
2-6 Argyle St, Morningside,
PO Box 41-014,
St Lukes, Auckland, New Zealand
Customer Service: 0800 567 5000
E: helpline@wainhousedist.co.nz
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>