Lindby 9627089 Jeanit Single-Circuit Track Instruction Manual
- June 10, 2024
- Lindby
Table of Contents
Lindby 9627089 Jeanit Single-Circuit Track
9627089
4x E14 LED m ax.10W
230V ~ 50Hz
Intended use
Provided for indoor use as track set
Product Information
- Revision: 2.1
- Model Number: 9627089
- Maximum Wattage: 4x E14 LED max. 10W
- Power Supply: 230V ~ 50Hz
- Package Contents:
- 1 Track Set
- Installation Hardware
- Mounting Instructions
Product Usage Instructions
- Begin by unpacking and identifying all components of the package.
- Ensure that the power supply is turned off before installation.
- Refer to the mounting instructions and use the provided installation hardware to securely mount the track set to the desired location.
- Connect the live conductor (L) and neutral conductor (N) to the corresponding wires of your power supply.
- Connect any desired E14 LED bulbs (max. 10W) into the track system.
- Once all connections have been made, turn on the power supply and test the product.
Note: Always follow safety guidelines when installing and using electrical products. If you are unsure about any aspect of the installation, please consult a qualified electrician.
Package contents
- 1 Track set
- Installation hardware
- Mounting instructions
Live conductor
Earth conductor
Neutral conductor
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>