i-PRO WV-Q193 Base Bracket Instruction Manual
- June 10, 2024
- i-PRO
Table of Contents
i-PRO WV-Q193 Base Bracket
Product Information
- This product is a base bracket used for mounting CCTV cameras onto ceilings or walls. It is suitable for use with cameras that require wiring through conduits or in locations where there is no space available for wiring in the ceiling or wall.
- The product is produced by i-PRO Co., Ltd. and is available in two models – WV-Q193 and WV-QJB501-W. The former is finished in light gray aluminum die-cast while the latter is in i-PRO white.
- The product dimensions are approximately 450 g {0.99 lbs}.
- The product should be installed using the corresponding installation guide of the camera model it will be used with. For the latest information about the supported cameras, refer to the i-PRO support website.
Product Usage Instructions
Before attempting to connect or install this product, please read these instructions carefully, and save this manual for future use.
- Refer to the installation guide of the camera for details on how to install this bracket.
- Make sure to remove this product if it will no longer be used.
- When using this product, also read the precautions described in the operating instructions for the camera to be attached.
- Refer installation work to the dealer. Installation work requires technique and experience. Failure to observe this may cause fire, electric shock, injury, or damage to the product. Be sure to consult the dealer.
- This product is not suitable for use in locations where children are likely to be present.
- Do not install this product in locations where ordinary persons can easily reach.
i-PRO Co., Ltd. assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation.
Operating Instructions
Included Installation Instructions
Base Bracket
Model No.
WW-Q193
wV-QJB501-W
- Before attempting to connect or install this product, please read these instructions carefully and save this manual for future use.
- The external appearance and other parts shown in this manual may differ from the actual product within the scope that will not interfere with normal use due to improvement of the product.
- For other languages of this manual, refer to our manual website https://i-pro.com/global/en/surveillance/documentation database).
i-PRO Co., Ltd. assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation.
Caution:
Before attempting to connect or operate this product, please read these
instructions carefully.
Notice: This product is not Suitable for use in locations where children
are likely to be present. Do not install this product in locations where
ordinary persons can easily reach. For information about screws and other
parts required for installation, refer to the Coresponding section of this
document.
Precaution
Refer installation work to the dealer
- Installation work requires technique and experience. Failure to observe this may cause fire, electric shock, injury, or damage to the product. Be sure to consuit the dealer.
- When using this product, also read the “Precautions” described in the operating instructions for the camera to be attached.
Preface
Mount the camera onto the ceiling or wall using this bracket. Use this bracket
when conduits are used for wiring, or when there is no space available for
wiring in the ceiling or the wall. For the latest information about the
supported cameras, refer to our support website
(https://i-pro.com/global/en/surveillance/training_support/support/technical_information/
).
Specifications
Precautions for installation
- In order to prevent injury, the product must be securely mounted to a wall or ceiling according to the Installation Guide of the camera.
- Make sure to remove this product if it will no longer be used.
Standard Accessories
- Operating Instructions (this document) …………………………………………………………..1 pc.
- Fixing screws for attachment plate (M4 × 8 mm {5/16 inches}) ………………………. 5 pcs. (of them, 1 for spare)
- Template B (for the base bracket) …………………………………………………………… 1 sheet
Installation
Refer to the Installation Guide of the camera for details of how to install
this bracket.
For Installation Guide of the camera, refer to the following manual website
(https://i-pro.com/global/en/surveillance/documentation_database).
For U.S. and Canada:
i-PRO Americas Inc.
For Europe and other countries:
i-PRO EMEA B.V.
https://www.i-pro.com/
Fs0520-2042
Printed in China
© i-PRO Co., Ltd. 2022
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>