CORSAIR Eve Light Strip Striscia LED User Guide
- June 10, 2024
- Corsair
Table of Contents
CORSAIR Eve Light Strip Striscia LED
Product Information
The Eve Light Strip is a smart LED light strip that can be controlled using the Eve app on your iPhone or iPad. The light strip connects to a controller which is then connected to a power supply and plugged into a power outlet. The Eve Light Strip is designed to safeguard your personal data by encrypting all data and only transferring it directly between the light strip and your device or home hub.
External Power Supply Information
| Measurement | Value | Unit |
|---|---|---|
| Manufacturer | Shenzhenshi Yingyuan Electronics Co Ltd | |
| Model | SAW30-240-1250G | |
| Input AC voltage | 100-240 | V |
| Input AC frequency | 50/60Hz | Hz |
| Output DC voltage | 24.0 | V |
| Output current | 1.3 | A |
| Output power | 30.0 | W |
| Average active efficiency | 88.3 | % |
| Efficiency at low load (10 %) | 87.8 | % |
| No-load power consumption | 0.08 | W |
Product Usage Instructions
- Connect the Eve Light Strip to the controller.
- Connect the controller to the power supply.
- Plug the power supply into a power outlet.
- Download the Eve app from the App Store.
- No cloud, registration, or profiling is required.
- Use the Eve app to control your light strip.
- Keep your HomeKit Setup Code in a safe place as you will need it to securely add Eve to your home.
Get started
The length of Eve Light Strip can be adjusted to accommodate your chosen application. To shorten Eve Light Strip, use a pair of scissors to cut along an indicated trim line (approximately every 30 cm).
Please ensure that Eve Light Strip is disconnected from power before shortening.
Extend
To extend Eve Light Strip, simply connect another strip. Eve Light Strip can be daisy-chained to a maximum length of 10 m.
The light source of this accessory is non-replaceable. When the light source reaches its end of life, the entire light strip should be replaced.
-
First, connect Eve Light Strip to the controller. Then connect the controller to the power supply and plug it into a power outlet.
As Eve Light Strip powers up, it will perform a quick test by cycling through each color.
-
Download the Eve app from the App Store.
-
Open the Eve app and tap Add Accessory. Eve will now guide you through the setup process.
If you have already set up another accessory, go to Settings in Eve to add Eve Room to your home.
Enjoy
Eve Light Strip can be controlled using the Eve app, the Home app, and Siri.
Control
Install firmware updates
Control
Configure guest access
Control
Securely access Eve Light Strip while you’re away from home and set up
powerful automations. Any
Apple TV HD, Apple TV 4K or HomePod using the same iCloud account as your
iPhone will automatically serve as a home hub, no further setup required.
Eve is designed to safeguard your personal data. All data is fully encrypted
and only transferred directly between your Eve Light Strip and iPhone, iPad or
home hub.
Learn more at evehome.com/privacy.
Legal Information
This device complies with part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures: reorient or relocate the receiving antenna; increase the separation between the equipment and receiver; consult the dealer or an experienced radio/TV technician for help. • This Class B digital apparatus complies with Canadian ICES-003.
This equipment complies with FCC RF and IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Changes or modifications not expressly approved by Eve Systems could void your
authority to operate this device.
Purpose of control: operating control; construction of control: plug-in
operating control; type 1 action, operating time: continuous.
External Power Supply Information
Reset
Please keep your HomeKit Setup Code in a safe place. You need it to securely add Eve to your home, and nobody but you has a copy.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>