mesko MS 3050 Electric Contact Grill User Manual
- June 10, 2024
- mesko
Table of Contents
MS 3050 Electric Contact Grill
MS 3050 User Manual
Product Information
The MS 3050 is an electric grill with a power supply of 220-240V ~50/60Hz. Its nominal power is 1800W, and its maximum power is 2500W. The grill features a temperature controller with a MIN/MAX setting and a grease drain for easy cleaning. It is important to follow the safety instructions outlined in the user manual to ensure safe and proper use of the device.
Product Usage Instructions
- Before using the grill, ensure it is placed on a flat surface away from heat sources, gas or electric stoves, and walls.
- Plug the device into a properly grounded outlet.
- Turn on the device using the temperature controller, adjusting it to your desired heat setting.
- Place your food on the grill and cook to your desired level of doneness.
- Once finished cooking, turn off the device and unplug it from the outlet.
- Allow the grill to cool down before cleaning, moving, dismantling, assembling, or storing.
- When cleaning the grill, ensure it is turned off and unplugged from the outlet. Remove any excess grease from the grease drain and clean the grill plates with a non-abrasive sponge or cloth.
- When disposing of the device, do not place it in a common waste bin. It must be delivered to a dedicated collecting point due to hazardous components that may affect the environment.
Following these instructions will ensure safe and proper use of the MS 3050 electric grill.
SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different, if the device is used for commercial purpose.”
- Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
- The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
- The applicable voltage is 220-240V, ~50/60Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
- Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
- WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are carried out under supervision.
- After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
- Never put the power cable, the plug or the whole device into the water. Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
- Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
- Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
- Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
- Never use the product close to combustibles.
- Do not let cord hang over edge of counter or touch hot surfaces.
- Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
- In order to provide additional protection, it is recommended to install residue current device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact professional electrician in this matter.
- Put the device on surfaces which are resistant to high temperature.
- Do not place any objects on the closed grill.
- For adequate air circulation is necessary minimum distance of 30cm from all sides of device.
- Do not place the device on a fast intermittently hot surfaces.
- Do not place the device on the gas or electric stove, near the wall, as well as in close proximity to heat sources.
- Do not use this device with charcoal or similar combustible materials.
- Before cleaning, movement, dismantling, assembling and storing the grill: Turn off the device, disconnect it from the mains and wait until the grill will cool down.
- Accessible surface temperatures can be high when the appliance is operating. Never touch the hot surfaces of the appliance.
- Never carry the device when it is turned on or when it is hot.
- Do not place the device under kitchen shelves, due to the rising heat and steam.
- The power cord can not be laid over the device, and should not touch or be near hot surfaces. Do not place the device under an electrical socket.
- Clean the unit after each use.
- Do not use the appliance with wet hands.
- Do not touch the surface of the device with any sharp objects (eg. a knife)
- Do not cover the heating plate with aluminum foil , etc., as this can cause cumulation of heat and damage the plastic parts and coating.
- Do not put utensils on the heating plates during use. Grill should be opened with a handle or grip according to the model.
- Do not use plastic utensils when handling the grill, it can melt.
DEVICE DESCRIPTION
- Cover handle
- Power indicator
- Ready indicator
- Fat removal channels
- Fat tray
- Temperature control knob: MIN/MAX
Remove all cartons and labels from housing and from inside (between heating plates).
INSTRUCTIONS FOR USE
-
Make sure that both heating plates are clean. Wipe the grill with a damp cloth if needed.
-
Place the grill on a dry, flat surface and plug in to the socket with grounding. The power and ready indicator (3)(4) will light.
CAUTION: The first time it is turned on, the grill may produce a small amount of smoke caused by some parts heating up. This is normal. Suggestion: leave the grill on for a few minutes to get rid of the factory smell. -
Wait about 10 minutes. After this time device should reach required temperature – ready indicator lamp will off (3).
-
Put a container (5) underneath the fat removal channel (4)
-
Fully open the cover by grasping the handle (1) and distribute the food evenly on the surface of the heating plate.
-
Grasp the cover handle (1) of the grill and close it.
-
Grilling time takes a few minutes and depends on the food used for grilling, and the degree of temperature setting (6)
-
While grilling, the ready indicator (3) will go on and off – the thermostat maintains the desired temperature of the heating plates.
-
Open the top cover and remove the grilled food with a plastic spatula.
CAUTION: Do not use metal utensils or sharp kitchen tools; they can damage the heating plates. -
Before inserting the next batch of food to be grilled, close the cover so that he heating plates reach the suitable temperature. When the ready indicator (3) turns off, the grill is ready to use.
-
When done, unplug the grill from the power source and allow it to cool down.
Table Grill function
-
Place Grill on a clean flat surface . The Grill can be positioned in flat position.
For this purpose: -
Lift the handle upward to maximum height and push it back to a 180 degrees angle (Im.3).
-
Put a container (5) underneath the fat removal channels (4)
CLEANING AND MAINTENANCE
-
Before cleaning the grill, make sure that it is cool to the touch and that is disconnected from the power source.
-
Regularly clean the outer surfaces of the grill with a soft sponge dampened with gentle soap and water. Then wipe the grill with a damp sponge. Do not wash the grill under running water.
-
Clean the heating plates with the oven cleaning liquid.
When done cleaning, wipe the cleaned elements dry. -
Do not immerse in water.
TECHNICAL DATA:
- Power supply:220-240V ~50/60Hz
- Power Nom.: 1800W
- Power Max: 2500W
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this appliance in the common waste bin.
