Carrie Elizabeth Printable Ring Size Guide User Guide
- June 10, 2024
- Carrie Elizabeth
Table of Contents
Printable Ring Size Guide
User Guide
Printable Ring Size Guide
Printable Ring Size Guide
This guide is designed to be used with a ring that perfectly fits the finger
you intend to wear your new ring on. For the most accurate measurement, use a
ring with a similar band width and style to the ring you wish to buy
Step 1
Print this page at 100% on a full A4 page, make sure you don’t select the
‘scale to fit page’ or ‘shrink to fit page’ options. To check the print size
is correct, the line below should measure 5cm
Step 2
Place the ring over the circles below and match the inside edge of the ring to
the circle closest in size. Make sure you select the circle which completely
fills the inside of the ring
Step 3
Your CE ring size is the size shown within the circle. If your ring falls
between two sizes, then we recommend ordering the larger size 
Don’t Have A Printer?
No problem! Alternatively, if you have an existing ring that fits the finger
you intend to buy your new ring for, you can measure the inside diameter of
this existing ring to determine your size. Simply follow the steps below:
- Place the ring on a piece of paper.
- Using a pen, make a mark inside the ring at opposite points.
- Remove the ring from the paper and measure the distance between the two points with a ruler
- With this measurement refer to the ‘Inside Diameter’ column of our Ring Sizing Table to determine your correct CE ring size
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>