SELECT Surfaces Evergreen Artificial Grass Installation Guide

SELECT Surfaces Evergreen Artificial Grass

Product Information

The Select Surfaces Artificial Grass is an easy-to-install solution for creating a beautiful, low-maintenance lawn. Made from high-quality synthetic materials, this artificial grass is designed to look and feel like natural grass, while requiring minimal upkeep. The artificial grass is perfect for outdoor use and is ideal for residential and commercial applications.

Product Usage Instructions

Prior to starting the installation process, it is important to make any necessary additions or changes to the drainage or irrigation system, electrical, water, or gas wires. Ensure that you are able to gain access to these systems in the future without damaging the installed artificial grass. All landscaping elements such as gardens, lighting, pools, pavers, etc. should be in place before starting the installation.

Required Materials & Tools

• Sub-base material
• Artificial grass infill and drop spreader (if necessary)
• Vibrating plate compactor and/or hand tamper
• Anchor nails
• Seaming tape
• Outdoor glue/adhesive
• Utility knife
• Measuring tape
• Mallet
• Rake
• Synthetic broom or shag carpet rake
• Hose

Job Site Preparation

1. Remove all organic material, including sod, weeds, grass, and roots. Apply a geotextile (a soil-stabilizing filter fabric) to keep native soil from coming into contact with the base material, which can cause rodent or insect infestations.
2. The geotextile fabric should cover the entire installation area. Ensure that you overlap the geotextile pieces by 4 inches to prevent drainage issues.
3. Apply compacted base material. Spread the base material using a rake over the installation area. Lightly water the ground, and compact the ground using a vibrating plate compactor or hand tamp.
4. Compact the edges last using either a mallet or a piece of wood to level the edges and ensure a clean edge.

Artificial Grass Installation

1. Measure the installation space and plan the placement of each roll. Ensure that the blades in each roll run in the same direction to maintain a consistent appearance.
2. Lay out the synthetic grass rolls, square off the artificial grass along your chosen location to minimize cutting and fitting on all 4 sides, and secure the squared edges with temporary nails.
3. Install U-nail to prevent movement of the artificial grass. Begin by joining rolls together towards the middle of the lawn before securing the outer perimeter. Install one U-nail at least every 24.6 inches to prevent the natural movement of the artificial grass. Be careful not to drive nails too deeply into the grass blade at the base of the mat.
4. Cut the artificial grass to fit your area, allowing at least1/8 inch excess for tucking in at the end of the installation.

By following these installation instructions, you can create a beautiful and low-maintenance lawn using Select Surfaces Artificial Grass.

JOB SITE PREPARATION

1.  Remove all organic material, including sod, weeds, grass, and roots. Organic material left underneath installed artificial grass will decompose, potentially causing failure of the sub-surface. Apply a geotextile (a soil-stabilizing filter fabric) to keep native soil from coming into contact with the base material. This will help prevent rodent or insect infestations.
2. The geotextile fabric should cover the entire installation area. If several pieces of geotextile fabric are required, ensure that you overlap the geotextile pieces by 4 in. – 6 in. (100 mm – 150 mm). Secure the geotextile fabric to the native soil using stainless steel or galvanized nails. It is critical that there be no wrinkles in the geotextile fabric as this will cause drainage issues .
3. Apply compacted base material. For most installations, it would be beneficial to add a minimum of 3 in. (75 mm) of compactable base material, but this can vary depending on the installation site. Road base and decomposed granite are both appropriate crushed aggregates. Spread the base material using a rake over the installation area. Lightly water the ground, and compact the ground using a vibrating plate compactor. A hand tamp can be used as an alternative to a vibrating plate compactor, but this will not be as effective to compact the aggregate.
4.  Compact the edges last. Use either a mallet or a piece of wood, or a hand tamp to level the edges, so as to set a precise level and ensure a clean edge .

PRODUCT INSTALLATION

1.  Measure the installation space and plan the placement of each roll. IT IS CRITICAL THAT THE BLADES IN EACH ROLL RUN IN THE SAME DIRECTION. Take into consideration which direction the grain should run to optimize the color of the artificial grass. For example, when installing artificial grass in a front yard, the grain of the grass should run toward the street.
2. Lay out the synthetic grass rolls . Square off the artificial grass along your chosen location to minimize cutting and fitting on all 4 sides. Once square, secure the squared edges with temporary nails.
3. Install U-nail to prevent movement of the artificial grass . Begin by joining rolls together towards the middle of the lawn before securing the outer perimeter. Install one U-nail at least every 24.6 in. (625 mm) to prevent the natural movement of the artificial grass. Ensure that you do not drive nails too deeply into the ground, as this will cause indentations on the surface of the installation. Avoid pulling the blades down along with the nails – the nails are hidden within the grass blade at the base of the mat. Cut the artificial grass to fit your area, allowing at least 1/8 in. (4 mm) excess for tucking in at the end of the installation . Ensure that cuts are clean.
4. In addition, seaming tape and adhesive for artificial grass can be used to join two rolls of artificial grass. Seaming or joining tape for artificial grass can help prevent weeds from coming up in between rolls. Follow the manufacturer’s instructions when using these products. Ensure that seaming is applied before the U-nails.
5. Once the artificial grass is installed, applying infill is recommended (such as Silica/Quartz sand), to provide weight to the installation. Use a drop spreader to allow for an even distribution of infill across the surface. Follow the manufacturer’s instructions when using infill products (artificial grass infill can be purchased at most hardware stores). If the artificial grass is intended to be used by pets, we recommend using Zeolite infill (it will help to absorb odors).
6. Manually bloom blades of grass so that the blades stand erect. Use a “shag” carpet rake or a broom with synthetic bristles. DO NOT USE WIRE OR METAL BRUSH TOOLS, as they will damage the blades and lead to fraying and breakage .

INSTALLING ARTIFICIAL GRASS ON A CONCRETE BALCONY OR PATIO:
Select Surfaces Artificial Grass can be installed to a concrete balcony, patio, or concrete slab.

1. Clear the space of all objects, including outdoor furniture. Ensure that the surface is clean and smooth. A self-leveling compound can be used to remove surface imperfections that could potentially show through the surface.
2. Plan the placement of the artificial, and lay out the rolls as they will positioned, ensuring that the blades are all running in the same direction. Make the necessary cuts to fit the artificial grass rolls to the installation area. Allow approximately 2 in. (50 mm) of excess artificial grass to trim of around the perimeter, to allow for clean edges. Leave the rolls laid out for approximately 2 to 3 hours before you apply the adhesive, to allow the artificial grass rolls to lay flat. Trim away the excess artificial grass on the edges using a sharp utility knife.
3. Use turf binder or outdoor adhesive to bind the artificial grass to the concrete slab, ensuring that you follow the manufacturer’s directions.
4. Manually bloom grass blades so that the blades stand erect. Use a “shag” carpet rake or a broom with synthetic bristles. DO NOT USE WIRE OR METAL BRUSH TOOLS, as they will damage the blades and lead to fraying and breakage.

CARE AND MAINTENANCE:

•  Remove debris: Overhanging trees and general use can cause debris to land on your newly installed lawn. It is recommended to spray down the artificial lawn once a month to remove dust and debris. Large debris can be regularly using a brush or your hand. Do not use wire or metal brush tools to remove debris from your lawn. Brushing the lawn will also help keep the blades upright. Organic debris should not be left to build-up as this can cause weeds to grow.
•  Remove stains: Most stains will be rinsed away with water.
• Do not drive vehicles on top of Select Surfaces Artificial Grass.
• Do not spray chemicals, herbicides, or pesticides on your artificial lawn.
•  Do not walk on artificial grass with athletic cleats.
•  Artificial grass can be damaged by gum or burned by cigarettes.
•  If your artificial grass is exposed to animal waste or urine, immediately remove the waste and rinse the area thoroughly with water.

WARRANTY

Select Surfaces Artificial Grass is covered by a 10 year warranty against color fade in excess of 15% scale of the original product to the original purchaser.
The following conditions apply to the warranty and may void the warranty if not followed correctly:

•  The artificial grass must be installed according to the instructions provided by the manufacturer. The owner must follow the care and maintenance guidelines.
•  If filing a warranty claim it must be submitted within 30 days of the discovery of fading or manufacturer’s defect.
•  Proof of purchase, such as a bill of sale is mandatory when requesting warranty service.
•  The manufacturer reserves the right to designate a representative to inspect the artificial grass in question and remove samples for analysis.
•  The warranty includes the replacement material, excludes labor cost and any other secondary costs.
• The warranty applies only to the original purchaser and is non-transferable.
•  The warranty only covers artificial grass applied appropriately in a residential environment. Select Surfaces Artificial Grass is not suitable for athletic or sport applications. WARRANTY EXCLUSIONS

The warranty does not cover any damages or defects caused by:

•  Improper installation, care, or maintenance.
•  Failure of the aggregate base system or the infill system.
•  Issues related to the application of adhesives or joining systems.
• Changes resulting from the application of sand or infill, trapped dirt, matted yarns, and compression.
•  Burns, cuts, accidents, vandalism, abuse, negligence, or neglect.
•  Drainage defects or deficiency on the sub-base and/or its surrounding area.
•  Wear or abrasions caused by inadequate sub-base.
• Use of improper footwear.
• Application of improper cleaning materials.
•  Use of cleaning chemicals, herbicides, or pesticides.
•  Force majeures or acts of god.

For questions regarding installation, please contact our Technical Support Department by email at [email protected] or by telephone at 1 855-250-8167. For additional information, please contact our Customer Service Department at [email protected] or visit www.selectsurfaces.ca. For questions about warranty, please contact our Customer Service department at [email protected].

References

• Select Surfaces | Laminate and Vinyl Flooring

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>