Epico Mag50S 5000mAh Wireless Power Bank User Manual

Epico Mag50S 5000mAh Wireless Power Bank

Product Information

The Mag50S Wireless Power Bank has a capacity of 5000mAh and features a Type-C input/output port, wireless charging capability, and simultaneous charging output. The power bank also comes with a Type-C cable and has a power LED indicator and a wireless charging LED indicator. The device is designed to comply with part 15 of the FCC Rules and has been evaluated to meet general RF exposure requirements.

Product Usage Instructions

1. Power On/Off: To turn the power bank on or off, press and hold the ON/OFF button.
2. Charging Mobile Devices Using Type-C Output Port: Connect your device to the Type-C output port using the included Type-C cable. The power LED indicator will display the charging status. To avoid excessive use, remove your device once it is fully charged.
3. Wireless Charging: Place your Qi-enabled device on the Mag50S Wireless Power Bank to begin wireless charging. The wireless charging LED indicator will display the charging status. Please remove any attachments from the phone before charging on this device, as attachments can interfere with wireless charging and lead to overheating. Additionally, items such as televisions, computer monitors, credit cards, bank cards, computers, diskettes and other data carriers, video cameras, mechanical watches, hearing aids, pacemakers may be damaged or disrupted by the magnetic field of wireless charging. If you have a pacemaker or other electronic body implant in use, keep a minimum of 3 feet distance from the device while charging wirelessly.
4. Charging Indicator: The power LED indicator will display the following status:
   • White LED stays on: Fully charged
   • The 1st LED flashes: Low battery
   • White LED flashes: Charging the power bank
5. Wireless Charging Indicator: The wireless charging LED indicator will display the following status:
   • LED indicator off: Standby
   • Green LED stays on: Working properly
   • Red LED flashes: Over-temperature
   • Red LED flashes rapidly: Foreign object detection (FOD)

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. Outputs above the rating may result in a risk of fire or injury. If you experience any issues or problems with the product, please consult a service professional. Incorrect reassembly may result in a risk of fire or injury. To reduce the risk of injury, close supervision is required when the product is used near children. Certain items such as televisions, computer monitors, credit cards, bank cards, computers, diskettes and other data carriers, video cameras, mechanical watches, hearing aids, pacemakers may be damaged or disrupted by the magnetic field of wireless charging.

SPECIFICATION

• Capacity: 5000mAh
• Type CInput: 5V/2.5A
• Type COutput: 5V/2.1A
• Wireless Output: 5WMAX)
• Simultaneous Output: 5V/2.5A

Accessories

PRODUCT FEATURES

LED USAGE

POWER LED INDICATOR

HOW TO USE

1. POWER ON/OFF:
   Single press the power button to turn ON the power bank and Double press to turn OFF

2. Wireless Charging:
   Center the wireless charging surface of the power bank to the back of your mobile device, and it automatically begins wirelessly charging.

3. Charging Mobile Devices

   • Using Type-C Output Port:
   • Connect the charging cable to your mobile device using the appropriate connector
   • Connect the Type-C tip of the cable to the Type-C Output port from the power bank.
   • Press the power button to turn ON the power bank to begin charging.
   • Remove the cable from your mobile device when it is fully charged.

4. Charging the Power Bank:

   • Use the provided Type-C to USB charging cable to connect to an adapter or computer to charge the power bank.
   • When charging the Power LED Indicators will flash indicating the level of charge.

SAFETY PRECAUTIONS

• WARNING-When using this product, basic precautions should always be followed:
• Read all the instructions before use.
• Never store or use this product in temperatures below 32°F(0°C) or above 115° F(45C).
• Do not overcharge your phone. The unit may become hot under excessive use. Remove your phone once it is fully charged.
• Never charge your phone for more than hours at a timne.
• To reduce the risk of injury, close supervision is required when the product is used near children.
• Do not expose the device to moisture.
• Do not use the device in excess of its output rating. Overload Outputs above the rating may result in a risk of fire or injury
• Do not use the device if damaged or modified.
• Do not disassemble the device. For repairs, seek a qualified service professional. incorrect reassembly may result in a risk of fire or injury.
• Do not expose the device to fire or excessive temperature.
• Exposure to fire or temperatures above 104F may cause explosion.
• To ensure product safetly, ensure that qualified service professionals use only identical replacement parts to ensure product safety.
• Attachments on the back of your phone can impede the effectiveness of the wireless charger, and lead to overheating.
• Please remove any attachments from the phone before charging on this device, attachments can interfer with wireless charging and lead to over heating.
• The strong magnetic fields of neodymium magnets can damage tems such as television, computer monitors, credit cards, bank cards, computers, diskettes and other data carriers, video tapes, mechanical watches, hearing aids, loud speakerS and
• VCRs. Pace-makers may be damaged or switched to “test mode” in the presence or a strong magnetiC Torce, if pace-maker or other electronical body implant is in use, keep a minimum of 3 feet distance.

FCC STATEMENT

• This device complies with Part 15 of the FCC Rules.

operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received,
   • Including interference that may cause undesired operation.
   • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and adiate radio frequency tions, may cause an usea in accordance witn tne instructions, may cause namrul Intenerence to radio Communicatons. HoWever, tere is no guaranee thatInteerence wil not occur in a Paricuar
   • Installation. it this equipment does cause harmful interterence to radio or televisiIon reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
3. Reorient or relocate the receiving antenna.
4. Increase the separation between the equipment and receiver.
5. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
6. Consult the dealer or an experienced radio/TV technician Orhelp.
7. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
   • This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions:
   • This device may not cause harmful interference, and
   •  this device must accept any interference received, including interference that may cause undesired operation.
8. The device has been evaluated to meet the general RE exposure requirement.

Warning:

• Changes or modifications not expressly approved by the tRr Omplance could void the useř authority to operate the equipment

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

• Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

• The device has been evaluated to meet the general RF exposure requirements.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>