Maxi UC Desktop Softphone Application
User Manual

Maxi UC Desktop
Softphone Application
For PC and Mac

Maxi UC Desktop Softphone Application

WHAT IS Maxi UC DESKTOP?

Maxi UC was formerly named Accession Communicator. You may see Accession referenced in certain areas of the application. The appearance of Maxi UC was completely  revamped in 2022. The functionality is the same.
Maxi UC is a desktop softphone for your MAC or PC that enables you to:
+ Make and receive audio and video calls
+ Send and receive chat/SMS messages
+ View presence information for your business group contacts
+ Manage your contacts, including integrating with Microsoft Outlook
+ Access your voicemails with a single click

You can also use Maxi UC to set up Maxi Meetings. See the separate Maxi Meeting User Manual for more information on setting up instant or scheduled meetings. Maxi UC  uses your PC speakers and microphone or a headset for voice calls and requires a camera for video calls.
Comm Portal
You can easily access the Subscriber COMM Portal from the Maxi UC application. It allows you to push and pull calls between your devices without hanging up and offers  video calling, voicemail features and other settings.

DOWNLOAD Maxi UC FROM COMMPORTAL

On the Comm Portal Log-in Screen, enter your 10-digit subscriber number and the password you were given by your System Administrator.
This will bring you to the Comm Portal Home Screen.

COMMPORTAL HOME SCREEN

On the Comm Portal Home Screen, scroll to the bottom and select Downloads.

On the next screen, select “On your Computer”.
Choose Maxi UC and click on the appropriate operating system link:
Windows 10+
Windows 10+ (.mist) (only choose this option if you are an administrator and have a specific need to use the .mist installer).
Mac OS X (10.13+).
Click Run to start setup wizard.
Follow the setup wizard prompts.
Once the set up is complete, the Welcome screen appears.

IMPORTANT NOTE: If you have never logged into your Subscriber Comm Portal interface, you will need to follow the Setup Wizard, where you will change your EAS  password, voicemail pin and record your name and default greeting for voicemail. Refer to the Subscriber Comm Portal User Manual for details.

On the Welcome screen, select “log in manually”.On the next screen, you will be asked to enter your current provider.
Click the drop down to find:
Northland Communications – Business Unlimited.

On the Login Screen:
Enter your 10-digit Telephone Number and EAS Password provided by your System Administrator.
Read and accept the terms and conditions.
When the download is complete, you will see the Maxi UC application.

PASSWORD RESET

+ To reset your password, go to the Comm Portal Log-in screen.
+ Select the Reset Password link and follow the prompts.

NAVIGATING Maxi UC

The UI is designed to be used from left to right. Use the tabs in the left pane (3) to control the content displayed in the middle pane (7). Make your selection in the middle  pane (7) to control what contact information displays in the right pane (10).
Contacts display in the right pane (10) and all available actions are available here, in the main content area, and from the set of actions in the header (9).
Use the Profile menu (1), Add button (2) and the Dialer field (6) to access features that are not directly tied to contacts.

PROFILE MENU

PROFILE MENU: Click on the Avatar to view the Profile Menu.
+ Presence: Shows the subscriber’s current presence information state. This is indicated to others in your business group by an icon on the avatar. See below on how to manually change it.
+ Set Custom Status: Add a custom message to your status such as: “In a meeting until 2pm”.
+ Change Avatar: If you choose to upload a picture, this will be used as your Instant Messaging (Chat) Avatar.
+ Change Password: Select to change/update your password.
+ Settings: Enables you to change the way that Maxi UC behaves, and also to test your audio and video equipment.
+ Call Park Orbits: Opens the Call Park window where you can view your available Call Park Orbits.
+ Apps: Displays the applications that are available for you to download.
+ Conference Manager: Opens the audio conference manager. See page 17.
+ Groups: Shows Call Pick up Groups and Multi-Line Hunt Groups that you are a member of and gives the option to log in or out of the group.
+ View Account: Displays the Subscriber Comm Portal application that allows users to set up various call services and message notification options. See Comm Portal User  Guide for more detailed information.
+ Check for Updates: Confirms whether you are running the latest version of Maxi UC.
+ About: Displays the version of Maxi UC you are running.
+ Help: Accesses a Help menu or reference guide for the application.
+ Log out: Logs out of Maxi UC. You must log back in on the next start up.
+ Quit: Closes the application without logging the user out.

MANUALLY CHANGE PRESENCE

To change your presence which is seen by others in your business group:
+ Select Profile > Presence (online, busy, do not disturb)
+ Select the status.
+ Select Open call manager to open Subscriber Comm Portal.

SET CUSTOM STATUS
To set a custom status:
+ Select Profile > Set custom status.
+ Enter your custom status and select Save.

When you have a custom status set, a message bubble appears on your Profile/avatar.

+ Select Edit to change your custom status.
+ Select Clear to delete your custom status.

MAKING CALLS

+ Select Contacts on the left.
This opens the new call window and displays contacts. Favorites appear at the top.
+ Enter a contact name in the input field using your PC keyboard. As you type, Maxi UC will display entries from your Contacts, Recants + Favorites. If they are a member of  your business group, you will also see their Avatar and availability.
+ Select an entry from the list of results. Clicking on a contact will display the Chat and Contact information in the right window.
+ Click on the number you wish to call.

USE ACTIVE KEYPAD TO ENTER A NUMBER

+ Click To show or hide the Active Keypad. When the keypad is active, the icon is blue.
+ Enter a number in the input field, using the Active Keypad or your PC. As you type, Maxi UC will display entries from your Contacts and Recent tabs if the number is programmed.
+ To start the call, either press ENTER on your keyboard or CALL below the Active Keypad on Maxi UC.
+ To clear a name or number from the input box, click the X.

RECEIVING CALLS

Your softphone must be open on your PC/Mac if want you to answer incoming calls. It can be minimized and running in the Windows system tray or taskbar, or the Mac  dock. If your softphone is not running, your incoming calls will usually be sent to your voicemail (unless you have them configured to do something else).
To hear the ringtone, you must have your computer speakers turned on or be on a headset. If your computer audio or headset volume are muted, you will not hear the ringtone.

INCOMING CALL PANEL
When you receive a call, you hear the Maxi UC configured ringtone and a panel will appear on your desktop.

REJECT INCOMING CALL WITH CHAT
When the call is from another member of your Business Group, there will be a dropdown next to the Reject button. Click reject to send either a pre- programmed message or create a custom message.

RECEIVE A SECOND CALL
Your account is configured to receive multiple calls on MaX UC.
If you are already connected to a call, when a second call is presented, you will hear a call waiting tone through your speakers or headset. You will also see the incoming call panel.
If you choose to answer the second call, the first call will automatically be held and you will be connected to the second call in the call window.
If you receive two incoming calls at the same time, you will see two incoming call panels on the display. You can answer or decline each call individually.

MANAGING CONNECTED CALLS

WHAT YOU SEE

IMPORTANT: Call recording laws from each state and country will differ from one another. They will require either One-Party consent or All-Party consent. Northland  does not offer legal advice, you should consult your legal counsel for guidance on the compliance activities that are appropriate for your organization.
PLACE AN ACTIVE CALL ON HOLD**

+ Click HOLD, a red line appears through HOLD.
+ To return to held call, click HOLD again.
NOTE: If you answer a second call, your first call is placed on HOLD automatically.

CALL TRANSFER (BLIND AND ANNOUNCED)
BLIND (UNANNOUNCED) TRANSFER
+ Click the TRANSFER Icon in the call window. The directory is displayed.
+ Enter a name or number to choose who to transfer the call to.
+ Click TRANSFER, the call is transferred immediately.

ANNOUNCED TRANSFER
+ From the Maxi UC App, using the Active Keypad, call the person you are transferring to (caller goes on hold).
Do not use the keypad on the call window.
+ You can also search Contacts to find the number.
+ When the party answers, announce the call.

+ You will see both call windows.
+ In either of the call windows, click TRANSFER.
+ The option appears to transfer the call to the party or select another number.
+ Select the other party and the call is transferred.

ESTABLISH A MULTI-PARTY (ADHOC CONFERENCE) CALL (Maximum of 4)
+ Click ADD PARTICIPANT, the Contacts tab appears.
+ Make a second call (enter a telephone number or select from Contacts).
+ Click ADD, the second number is dialed.
+ When the second party answers, you are all connected.
+ Repeat to add additional participants. (Maximum of four).
NOTE: If the party who originates the call hangs up, all parties are disconnected.

CALL PARK
Call Park enables you to place a call on a “system” hold so that it can be retrieved by another Subscriber in your Business Group.
In order to use call Park on MaX UC, you must first enable it in your MaX UC Options.
ENABLE CALL PARK
+ Go to PROFILE > SETTINGS
+ Go to the CALLS tab.
+ Tick the checkbox to enable CALL PARK.

PLACE AN ACTIVE CALL ON PARK
+ On the Active Call panel, click PARK.
+ A Call Park Window appears displaying available Orbit codes.
+ To park the active call, hover over an available Orbit slot and click PARK CALL HERE.
+ Advise person which PARK/ORBIT slot the call is on.

NOTE: If a call is already parked, the Orbit slot will display a green PICK UP CALL message.
RETRIEVE PARKED CALL
+ Go to PROFILE > CALL PARK ORBITS. The Call Park Orbits are displayed.
+ Click PICK UP CALL.
VIDEO CALLS
TURN ACTIVE CALL INTO VIDEO CALL
+ While on an active call, to start sending video, click Video, the icon turns red.
+ The video window will open.
+ If the person you are sending video to also sends you video, you will see them in the video window.
+ To stop sending video, click Video again.
NOTE: This is peer to peer video only within your business group.
ANONYMOUS CALLS

BLOCK OUTBOUND CALLER ID

+ In Maxi UC, go to PROFILE > VIEW ACCOUNT > CALL SETTINGS. This brings up your Maxi UC Subscriber Comm Portal.
+ Check Withhold caller ID when making calls.
+ Click Apply (if you don’t see Apply, scroll to the right).

SENDING INSTANT MESSAGES (CHATS AND SMS)

SEND CHAT

+ On the CONTACTS icon, choose the contact you want to chat with.
+ The Message Window will open on your computer.
+ Enter your message at the bottom of the message window.
+ Press ENTER on your keyboard to send the message.
+ Click on the SMILEY FACE emoji to include an emoji.
NOTES: You can send messages while you are on an active call.
If the contact is not a member of your business group, the instant message will automatically be sent as an SMS.
SMS messaging allows you to send an SMS (Short Message Service) to a mobile number. The contact will receive the mes- sage as a text on their mobile device and will be  able to respond to you via SMS back to your Subscriber Telephone Number. MMS messaging is not available.

SEND A GROUP CHAT
You can send a group chat to multiple subscribers in your Business Group (up to a maximum of 200).
+ In MaX UC, select ADD > NEW GROUP CHAT.
+ Search for contacts or enter a contact name.
+ Enter a subject (optional).
+ When complete, select CREATE GROUP CHAT.

MESSAGE WINDOW OPTIONS
In the top of the Message Window you see the following additional options:

• When a contact is a favorite, the star is solid blue. Click to add or remove from favorites. Favorites appear first in your contacts.
  ** When a business group contact is unavailable, choose notify to receive a response when the contact becomes

SEND A FILE VIA CHAT
You can now send files to other Maxi UC Desktop users through the CHAT feature. The maximum file size cannot exceed 2GB.
To send a file via chat:
+ Select the closed file on your PC/MAC.
+ Drag the file to the CHAT window. (Do not hover over the “Send a message” section, hover over the CHAT window.

+ The receiver is asked to accept the file.+ Once the file is accepted, the receiver will be able to open the file.

VIEWING CALL AND CHAT HISTORY

CALL HISTORY
You can view details of received, dialed and missed calls as well as Chat history on the Recent tab.

NOTES
ON A PC:
+ When you have a new missed call, a new voicemail or a new chat, you will see a red circle with a white number on the appropriate menu indicating the number of calls,  voicemails or chats you have missed since you last opened the tab.
+ When you have Maxi UC minimized to your taskbar, it will flash orange and then go solid orange when there are new calls, voicemails or chats. The number in the circle in  the taskbar is the sum of all new calls, voicemails and chats.
+ When the total goes above 9, it will be indicated as 9+.
+ When the Maxi UC window is open, it will only give you the visual light indicator once. If it is minimized, it will blink multiple times and then will go solid.
+ If you do not see the red bubble on the Maxi UC icon in the task bar, go to your task bar settings and turn off “use small task bar buttons”.

ON A MAC:
+ When you have a new missed call, a new voicemail or a new chat, you will see a red circle with a white number on the appropriate menu indicating the number of calls,  voicemails or chats you have missed since you last opened the tab.
+ The number in the circle on the taskbar is the sum of all new calls, voicemails and chats.
+ When the total goes above 9, it will be indicated as 9+.
+ The Maxi icon does not flash on a Mac.
+ There are multiple options for viewing notifications. To change the notification settings, go to Settings > Notifications & Focus.

WORKING WITH CONTACTS

Maxi UC can store the details of your contacts in its User Interface (UI). It is also provisioned to link with one contact source – either Comm Portal, Microsoft Outlook or  Mac Address Book. Depending on the system configuration, you may be able to change this. These contacts appear under the Contacts tab in the Tools Menu. Contacts from  Comm Portal, Microsoft Outlook or Mac Address Book that appear in the Maxi UC UI can be edited in either application and the changes will be synced between them.

CHANGE THE CONTACT SOURCE

+ Go to PROFILE > SETTINGS.
+ On the General page, scroll down to find CONTACTS.
+ Click the drop down to view the contact sources available.
+ Select the contact source you want to use.
+ Selecting MaX UC will use the contacts from the CommPortal account.
NOTE: If you use an Outlook Calendar and you select Integrate with Outlook for calls, messaging and presence and also choose Use Contacts from Outlook, when you  have a meeting or event scheduled on the Outlook Calendar, your presence in Maxi UC will show you as in a meeting. In addition, Presence Icons will appear in Outlook for Subscribers in your Business Group.

SEARCH CONTACTS
+ In the Search field, Start typing the name you are searching for.
As you type, the Softphone will display the possible matches from all stored contacts.
+ Select the contact.

UNDERSTANDING PRESENCE ICONS

+ Subscribers in your Business Group that are logged in to MaX UC will show the following presence icons:
The Subscriber is available for calls and chats.
The Subscriber is on a call.
The Subscriber is on Do Not Disturb.
The Subscriber has been away for a designated period of time. Time is programmable in Settings.
The Subscriber has placed themselves on Busy to indicate they prefer not to be interrupted. They will still receive calls and chats. Chat alerts and ringing can be turned  off by going to OPTIONS > CHAT and selecting:

The Subscriber has a meeting scheduled on their Outlook Calendar and is using Outlook Contacts in Maxi UC. They can see calls come in but won’t be interrupted by ringing.
+ Subscribers in your Business Group that are logged into a desk phone will show the following presence icons:
The Subscriber is on a call.
The Subscriber is on Do Not Disturb.

ADD OR MODIFY A CONTACT
ADD A NEW CONTACT

+ In Maxi UC, click ADD > ADD CONTACT
+ Complete the fields you have information for.
+ Click ADD.

ADD A CONTACT FROM THE HISTORY TAB

+ Select an entry on the HISTORY tab.
+ Select ADD AS A CONTACT.
+ The same Add Contact box appears as seen above.
+ Complete the fields you have information for.
+ Click ADD.

HUNT GROUPS

When you are a member of a group (Hunt group or aid), your account phone is programmed to ring when a choice is made from an automated attendant or when the  hunt group number is dialed. You may be required to log in to the hunt group to receive calls. You can log in to a group from any device that your account phone number is  active on, or from COMM Portal.

LOG IN FROM COMMPORTAL
+ On Maxi UC Desktop, go to PROFILE > GROUPS This opens Comm Portal to the Groups tab.

On the left, you see the Groups you are a member of as well as your “login” status.
You are logged in You are logged out
On the right, you see the details of the hunt group, including how many members, your status again and the member names and their status.
To change your login status select the word “Logout” or “Login” on the right depending on current status.
LOG IN/OUT MANUALLY FROM MaX UC
You can also log in or out by entering a short code. When you are a member of only one hunt group, do the following:
+ To log in: Dial 44
+ To log out: Dial 44
If you are a member of more than one group, you will need to know the group number in order to log in and out of the individual groups manually from the Maxi UC app. If  you do not know your group numbers, contact your System Administrator.
+ To log in: Dial 44, enter the group number and press #. If you are a member of multiple Hunt Groups you will need to log in to each group individually.
+ To log out: Dial 44. If you are a member of multiple Hunt Groups, the system announces which groups you are logged into and will prompt you to press 0# to log out of  all hunt groups, or to enter the hunt group number followed by # to log out of an individual hunt group.

USING THE AUDIO CONFERENCE MANAGER

Meet Me or Voice Conference is a “dial in” Conference bridge. There is one Conference Bridge Number and a moderator must join the conference for all participants to be  connected. Each “moderator” will have a unique moderator code and a participant code to give to participants. This will be provided to you by Northland’s System  Administrator.
You can access the Conference Controls from the Maxi UC Tools Menu or via the web link: https://buconf.northland.net/ (See Meet Me Audio Conference User Guide for complete information on Moderator tools).
To access the Moderator controls via Maxi UC, select PROFILE > CONFERENCE MANAGERThe following commands are available on this window and can be set prior to joining the conference or from the Moderator Controls during the conference:

YOUR VOICEMAIL

VOICEMAIL: The voicemail system is voice prompted with easy to follow instructions and commands.
FIRST TIME VOICEMAIL SET UP
TO SETUP VOICEMAIL FOR THE FIRST TIME: Press the Voicemail (Message) Key.
NOTE: Follow the audio instructions to create a password, record your name + record your personal greeting.
There are multiple greeting types available for you to choose from:
+ PERSONAL GREETING: Plays to everyone that calls you
+ EXTENDED ABSENCE: Plays when you will be away from your office or phone for meetings/vacation, etc.
You can turn off message acceptance when using the extended absence greeting
System will remind you extended absence greeting is playing
+ SYSTEM GENERATED: A synthesized greeting that’s set up to include your phone number or recorded name or both
+ BUSY: Plays when you have active calls on all available lines
+ OUT OF HOURS: Can be set to play outside of your normal business hours, weekends and holidays
+ FORWARDED TO VM: Plays when you have your phone set to forward to voicemail
NOTES: Through the Self Service Comm Portal, you are able to:
+ Record and change greetings
+ Choose your voicemail to email options
+ Change your login for voicemail so you’re not required to enter your mailbox and pin each time
+ Change other voicemail and telephone settings
Please refer to the Comm Portal Self Service User Guide on the Northland Communications website for full details.

YOUR VOICEMAIL

LOG IN TO VOICEMAIL
From any internal extension:
+ Press the Voicemail Key or dial *99
+ Enter your 10-digit telephone number and press the # Key
+ Enter your password and press the # Key
NOTE: Through Comm Portal, you can change your settings so pressing the VM Softkey automatically logs you in at your own extension.
From any external telephone:
+ Dial: 315-671-0031
+ Enter your 10 digit telephone number and press the # key
+ Enter your password and press the # key

COMMON VOICEMAIL COMMANDS

Main Menu
1 Listen to messages
2 Send a message to another user
3 Work with personal greetings
4 Mailbox settings
5 Work with Reminder Messages
6 Access deleted messages
7 Switch Account (log into another account)
0 Access Help

• Exit Voicemail or return to previous menu
  NOTES: Star (*) will always back you up to the previous menu
  Pound (#) will bypass a user’s personal greeting

Listening to Messages
1 Repeat
2 Save
3 Erase
4 Reply
5 Send a copy
6 Increases the message volume
7 Slows the message playback down
8 Pause / Resume
9 Speeds the message playback up

Next Message

11 Previous Message
77 Skip backward 5 seconds
99 Skip forward 5 seconds

YOUR VOICEMAIL

When you have new voicemail messages, the voicemail icon will illuminate red and indicate the number of messages.

+ Click the MESSAGE icon, to take you to the Comm Portal Messages page.
+ Comm Portal shows you the information regarding the call including caller ID, date, time and duration of message.
+ Click Play to listen to the message.

ACTIONS
Click ACTIONS drop down for the following:

+ Reply to another subscriber in your Business Group.
+ Mark the message as listened to.
+ Forward to an email address.
+ Forward as a voicemail to another subscriber in your Business Group.

YOUR VOICEMAIL
ADDITIONAL VOICEMAIL SETTINGS

There are additional voicemail settings available in the main menu. Some settings are only available when you log in through a telephone. See page 19 for how to log in from any telephone. See the Comm Portal User Guide for settings that are available

WORK WITH GREETING SETTINGS
From the Main Menu, press 3 to work with Greetings. The following greeting settings are available.
Press 1 to work with the personal greeting
Press 2 to work with the extended absence greeting
Press 3 to choose a system generated greeting or to work with your recorded name
Press 5 to work with the greeting that plays when your phone is busy
Press 6 to work with your out of hours greeting (this allows to set a schedule for a greeting that plays outside of your normal business hours). See also the Comm Portal User Guide.
Press 9 to work with the greeting callers here when your phone is set to forward all calls to voicemail
WORK WITH TIMESAVER AND CONVENIENCE SETTINGS
From the Main Menu, press 4 to work with Settings. The following settings are available.
Press 1 to work with group lists – add / edit / delete group lists.
Press 2 to work with timesaver settings – turn autopay on / off, work with Urgent Message settings and change your message header and body settings.
Press 3 to work with Security – change the pin, set fast login or set skip pin.
Press 5 to work with Notifications – message waiting indicator, email notifications and phone notifications.
Press 6 for Additional Settings – Check the Operator number or turn Marketing broadcasts on / off.
Press 0 to hear helpful hints.
TRANSFER TO VOICEMAIL: Sends a caller directly to voicemail without ringing the phone.
+ Tap TRANSFER.
+ Press 99 and enter EXTENSION Number
+ Tap TRANSFER again.
LEAVE A MESSAGE FOR ANOTHER USER WITHOUT RINGING THE PHONE:
+ Press 99.
+ Enter Extension Number and tap the CALL icon.

Need support? Connect with us at
www.northland.net/support or
Dial 4357 (HELP) or 315-671-6262 to
speak to a Northland Representative

References

• Business Unlimited Support | Northland University
• Conferencing

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>