EUG 900DAB Full HD Video Projector User Manual
- June 9, 2024
- EUG
Table of Contents
900DAB Full HD Video Projector
User Manual
Thank you for purchasing the product
Important Safeguards
Installation
To get a better watching, please use this projector while drawing the curtain
or in a dark MOM. Please use the projector carefully, dropping or crashing may
damage parts or result in blurred images and abnormal displaying.
Power
Be careful while using the power cord, avoid excessive bending; the damage of
power cable may cause electric shock and fire. It is better to unplug the
power cord after power off.
Cleaning
Unplug the power cable firstly.
Clean the shell regularly with a damp cloth, neutral detergent can be used.
Please use a glasses cloth or lens paper, avoid scratching the lens.
Please clean projector’s vents and speakers regularly by banister brush, or
the Ventilation will be blocked.
High Temperature Attention
While projection or just finishing, the exhaust port nearby will be very hot,
if touch it, would get scald.
While projection, please do not look the lens directly, or may hurt eyes.
Warm Tips
Do not disassemble the projector for there will be a risk of electric shock,
and the unauthorized disassembling will void the warranty.
Please do not put any liquid or heavy stuff on the projector.
To ensure the stability of heat dissipation, please open the height bracket in
the bottom of the projector before starting.
Projector Knowledge
Projector can input high-definition video signal and composite video signal, and support stereo audio signal input and output. Please refer to the following figure to connect the projector and other equipment according to your own needs.
Lens- Control panel
- Indicator light
- Manual focus
- Speaker
- Vents
- VGA port
- USB port
- HDMI port
- 3.5mm audio port
- AV port
- Master switch
- AC-in
Remote Control
- Power key
- Settings
- Arrow keys
- Return key
- AF micro adjustment
- Source
- Menu
- Main interface
- Volume-F/-
- Mute
Projector Installation
Standard Setting
Please refer to the following table to adjust your picture size and distance.
(from the lens to the screen).
| Picture size (inch) | Projection distance (16:9 ) |
|---|---|
| (cm) | (feet) |
| 60 | 180 |
| 72 | 216 |
| 100 | 300 |
| 120 | 360 |
| 150 | 450 |
| 180 | 540 |
| 200 | 602 |
Please allow 5%-10% error to the image sizes and projection distance in the table above (due to measured manually). If the distance is less than Min. data or more than Max. data, the image maybe blurry.
Installation Method
Contact a professional installer to mount this projector to a ceiling. Follow
the instructions below for the correct projector positions.
|
---|---
1. Front-ceiling| 2. Front-desktop
|
3. Rear-ceiling| 4. Rear-desktop
Warning:
- The projector may be damaged beyond repair if it is incorrectly mounted on a ceiling or on a surface.
- The projector should only be used in an environment where the temperature does not exceed the range of 5°C -35°C . Projector malfunction may occur if this is not adhered to.
- Malfunction may occur if the projector is subjected to dusty, wet, moist or smoky conditions.
- Poor ventilation could cause overheating which could lead to damage to the projector as well as a life threatening situation.
Need Keystone Correction| Standard Installation| Need Keystone Correction
Turn the Projector On/Off
When the projector is connected to a power source, the projector enters into
standby and the power indicator is red.
Switch on: Press the power key on the body or the power key on the remote
control, the indicator will turn green and enter into the working state.
Switch off: In the working state, press the power key on the body or the
power key on the remote control, the indicator changes from green to red, and
the projector is turned off.
Use of the Projector
How to Switch Source
Select and enter “SOURCE” on SETTING interface, then select the source you
want at the bottom of the page: AV/VGA/HDMI1/HDMI2/USB.
How to Use Image and Audio Settings Select and enter “SETTINGS” on SETTING
interface, then select “Image” for image settings and “Audio” for audio
settings.
Image: Image mode/User settings/Advance setting/Zoom mode/Reset.
Audio: Audio Mode/Volume/Equalizer Detail/Advance setting/ARC.
How to Play Files in USB Drive
Insert the USB device, and select “YES” in the pop-up interface. Or select and
enter “USB” on the SETTING interface, and browse the files in your USB device.
Multimedia Format Supported in USB Drive
Video Format: 3GP/AVI/FLV/MP4/MPG/VOB/TS/M2TS/DAT/MKV
Audio Format: MP3/APE/AAC/FLAC/OGG/WAV/WMA/MID/DTS/M4A
Image Format: BMP/JPG/PNG/JPEG
Text Format: TXT/PDF/DOC/XLS/PPT
How to Use Projection Settings
Select and enter “SETTINGS” on SETTING interface, then select “Projection
setting”.
4D keystone: Manually adjust the four corners through the arrow keys
until the projection image becomes rectangular.
Auto Keystone: Switch on to achieve auto image trapezoid correction upon
projecting.
Zoom In/Out: Zoom out the image or enlarge the image to its original
size.
Quick keystone: Adjust vertically/horizontally until the projection image
becomes rectangular.
Projection Mode: Front-Projection/Rear-Desktop/Front-Ceiling/Rear-
Ceiling.
Wireless Connect to the Internet
Select and enter “SETTINGS” on SETTING interface, then select “Network”–>
“Wireless network”, switch on and select the network on the list, fill in
password and complete the connection.
How to Connect Bluetooth
Select and enter “SETTINGS” on SETTING interface, then select and enter
“Bluetooth”. Turn on the “BT Switch”, then select and enter “Management”,
search and pair with Bluetooth device.
How to Use Screen Mirroring
Go to APPS interface, select and open corresponding screen mirroring App for
your device, and then set up the connection in the order in the interface.
Wi-Fi Display Sink for Android devices; AirScreen for iOS devices.
Connection Steps:
- The projector and the Android or iOS device should be connected to the same WiFi or same Network.
- Turn on “Wireless Display”/”Wireless Projection”on Android device, or “Screen Mirroring” on the iOS device.
- Select the corresponding projector device name to connect.
Boot Upon Power Restore
Select and enter “SETTINGS” on SETTING interface, then select and enter
“General”, turn on the “Boot Upon Power” switch. Once power cable connected,
projector will turn on and enter into main interface directly.
*You can also use a timing switch or other smart device to achieve timed start of the projector. The timing switch device need to be prepared by yourself.
Language and Time Zone Setting
Select and enter “SETTINGS” on SETTING interface, select and enter “General”.
Language Setting: Select and enter “Language”, and choose the language
you want.
Time Zone Setting: Select and enter “Time”, and choose the time zone you
want.
Troubleshooting
-
The indicator light does not work when the power switch is turned on.
• Power cable is not connected properly. Reconnect the power cable or change the power cable.
• The power switch is faulty. Contact your seller for help.
• The power board is faulty. Contact your seller for solutions. -
The projector does not work on when using the remote control.
• The power switch is turned off.
• The remote control has no batteries or the batteries are low.
• The remote control is not being aimed at the IR receiver.
• The IR receiver is under strong lights.
• The remote control is defective, contact your seller to get a new one. -
No image.
• The input source maybe incorrectly selected.
• No input signal.
• The input cable is not connected.
• Under PC mode make sure the video output frequency is between 50-60Hz.
• The lens may be blocked,check if there something in front of the lens or lens cover isn’t taken off. -
Auto-off. O The projector ventilation is blocked.
• The voltage is not stable.
• The projector is overheated. Check if the cooling fan is working. -
System freeze up.
• Android OS may have bug,contact your seller for technical support. -
App contents cannot be mirrored.
• Copyright protected App contents on Netflix,prime video, Hulu or any similar video service platform are prevented to be mirrored or cast. This restriction is set by the video service provider.
Warranty Card
Buyer information
Name/Company: ———————–
Telephone: ——————————
Address: ——————————–
Fax No.: ——————————–
Product Purchased: ——————-
Model No.: —————————–
Series No.: —————————-
Seller Store Name: ——————
Date of Purchase: ————————
Manufacturer Information:
Guangzhou Caiwei Optoelectronics Co., Ltd
Address: Room 201-401 Building 3, No. 89, Majun Street, Dongchong Town,
Nansha District, Guangzhou, China 511453
Official Website: www.caiweiinc.com
Service Email: caiwei@eug.net.cn
Thank you for purchasing the projector.
From date of purchasing, we offer one year warranty on projector and 6 months
warranty on the bulb.
When you meet problem with the projector, contact your seller or send email to
the above email address with your ORDER NUMBER and the purchase platform or
website.
IMPORTANT NOTE: All warranty policies and warranty terms are limited to
brand new products that bought from official channels, second-hand products or
purchased from other unofficial channels are not covered by the warranty, and
no warranty service will be provided.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>