LG WM5500HVA .5 Cu. Ft. Stackable Smart Front Load Washer Owner’s Manual
- June 9, 2024
- LG
Table of Contents
WM5500HVA .5 Cu. Ft. Stackable Smart Front Load Washer
en-us_main.book.book Page 1 Wednesday, November 16, 2022 4:12 PM
Scan to see the online manual.
OWNER’S MANUAL
WASHING MACHINE
Read this owner’s manual thoroughly before operating the appliance and keep it
handy for reference at all times. This abridged owner’s manual addresses user
safety, precautions, and installation information.
To view the complete owner’s manual, you may:
1. Online manual: Visit the LG website at: http://gscs-manual.lge.com/
Total/HQ/GatewayPage/main.html or scan the QR code above; or 2. Printable PDF
manual: Visit lg.com and search for your model number; or 3. Call or write to
customer service as provided in your Limited Warranty.
ENGLISH
WM5500HA / WM6500HA
MFL71693734 Rev.00_111622
www.lg.com
Copyright © 2022 LG Electronics Inc. All Rights Reserved.
en-us_main.book.book Page 2 Wednesday, November 16, 2022 4:12 PM
2
TABLE OF CONTENTS
3 IMPORTANT SAFETY INSTRUCTIONS
3 READ ALL INSTRUCTIONS BEFORE USE 3 WARNING STATEMENTS 6 CAUTION STATEMENTS
7 PRODUCT OVERVIEW
7 Product Features
9 INSTALLATION
9 Before Installing 10 Choosing the Proper Location 11 Unpacking and Removing
Shipping Material 12 Connecting the Water Inlet Hoses 13 Connecting the Drain
Hose 14 Leveling the Washer 15 Final Installation Check
17 OPERATION
17 Before Use 18 Loading the Washer
20 SMART FUNCTIONS
20 Using LG ThinQ Application 23 Smart DiagnosisTM Function
24 MAINTENANCE
24 Regular Cleaning 24 Periodic Maintenance 28 Care in Cold Climates
30 TROUBLESHOOTING
30 Before Calling for Service
33 LIMITED WARRANTY
33 USA 37 CANADA
ENGLISH
en-us_main.book.book Page 3 Wednesday, November 16, 2022 4:12 PM
IMPORTANT SAFETY INSTRUCTIONS 3
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Safety Messages
Your safety and the safety of others are very important. We have provided many
important safety messages in this manual and on your appliance. Always read
and follow all safety messages.
This is the safety alert symbol. This symbol alerts you to potential hazards
that can kill or injure you and others. All safety messages will follow the
safety alert symbol and either the word WARNING or CAUTION. These words mean:
WARNING
You may be killed or seriously injured if you do not follow instructions.
CAUTION
You may be injured or cause damage to the product if you do not follow
instructions. All safety messages will tell you what the potential hazard is,
tell you how to reduce the chance of injury, and tell you what may happen if
the instructions are not followed.
WARNING STATEMENTS
WARNING
· To reduce the risk of explosion, fire, death, electric shock, scalding or
injury to persons when using this product, follow basic precautions, including
the following:
Installation
· Adhere to all industry recommended safety procedures including the use of
long-sleeved gloves and safety glasses.
· Never attempt to operate this appliance if it is damaged, malfunctioning,
partially disassembled, or has missing or broken parts, including a damaged
cord or plug.
· Before use, the appliance must be properly installed as described in this
manual. · To reduce the risk of severe injury or death, follow all
installation instructions. · Refer to the INSTALLATION INSTRUCTIONS for
detailed grounding procedures. Installation instructions
are packed with the appliance for the installer’s reference. If the appliance
is moved to a new location, have it checked and reinstalled by qualified
service personnel. · Moving or installation of the appliance requires two or
more people. · Do not install the appliance in humid spaces. · Store and
install the appliance where it will not be exposed to temperatures below
freezing or exposed to outdoor weather conditions. · This appliance is not
designed for maritime use or for mobile installations such as in RVs,
trailers, or aircraft. · Keep packing materials out of the reach of children.
Packaging material can be dangerous for children. There is a risk of
suffocation.
en-us_main.book.book Page 4 Wednesday, November 16, 2022 4:12 PM
4 IMPORTANT SAFETY INSTRUCTIONS
· Destroy the carton, plastic bag, and other packing materials after the
appliance is unpacked. Children might use them for play. Cartons covered with
rugs, bedspreads, or plastic sheets can become airtight chambers.
· The appliance must be installed and electrically grounded by qualified
service personnel in accordance with local codes.
· When installing or moving the appliance, be careful not to pinch, crush, or
damage the power cord. · Connect to a properly rated, protected, and sized
power circuit to avoid electrical overload. · This appliance must be
positioned near to an electrical power supply. · Disconnect the power cord,
house fuse or circuit breaker before installing or servicing the appliance. ·
The power cord of this appliance is equipped with a 3-prong (grounding) plug
which mates with a
standard 3-prong (grounding) wall outlet to minimize the possibility of
electric shock from this appliance. · Do not, under any circumstances, cut or
remove the third (ground) prong from the power cord. · Use new hoses when
connecting the washer to the water supply. Do not reuse old hoses.
Operation
· Read all instructions before using the appliance and save these
instructions. · Use this appliance only for its intended purpose. · If the
product has been submerged in water, sitting in standing water, or
waterlogged, do not come in
contact with the product and immediately contact an LG Electronics Customer
Information Center for instructions before resuming use. · If you detect a
strange sound, a chemical or burning smell, or smoke coming from the
appliance, unplug it immediately and contact an LG Electronics Customer
Information Center. · Under certain conditions, hydrogen gas may be produced
in a hot-water system that has not been used for two weeks or more. HYDROGEN
GAS IS EXPLOSIVE. If the hot-water system has not been used for such a period,
before using the appliance, turn on all hot water faucets and let the water
flow from each for several minutes. This will release any accumulated hydrogen
gas. As the gas is flammable, do not smoke or use an open flame during this
time. · Do not reach into the washer if the tub or drum, agitator, or any
interior parts are moving. Before loading, unloading, or adding items, press
Start/Pause and allow the tub or drum to coast to a complete stop before
reaching inside. · This appliance is not intended for use by persons
(including children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or
instruction concerning the use of the appliance by a person responsible for
their safety. · Do not allow children or pets to play on, in or with the
appliance. Close supervision is necessary when the appliance is used near
children or pets. · Keep laundry products out of children’s reach. To prevent
injury to persons, observe all warnings on product labels. · Repair or
immediately replace all power cords that have become frayed or otherwise
damaged. Do not use a cord that shows cracks or abrasion damage along its
length or at either end. · Never unplug the appliance by pulling on the power
cord. Always grip the plug firmly and pull straight out from the outlet. · Do
not use an extension cord or adapter with this appliance. · Do not grasp the
power cord or touch the appliance controls with wet hands. · Do not modify or
extend the power cord. · If the electrical supply cord is damaged, it must
only be replaced by the manufacturer or its service agent or a similar
qualified person in order to avoid a hazard. · Do not put oily or greasy
clothing, candles or flammable materials on top of the appliance. · Keep the
area underneath and around your appliances free of combustible materials
(lint, paper, rags, etc.), gasoline, chemicals and other flammable vapors and
liquids.
ENGLISH
en-us_main.book.book Page 5 Wednesday, November 16, 2022 4:12 PM
IMPORTANT SAFETY INSTRUCTIONS 5
· Do not store or use gasoline or other flammable vapors and liquids in the
vicinity of this or any other appliance.
· Do not mix chlorine bleach with ammonia or acids such as vinegar. Follow
package directions when using laundry products. Incorrect usage can produce
poisonous gas, resulting in serious injury or death.
· Never use harsh chemicals, abrasive cleaners, or solvents to clean the
washer. They will damage the finish.
· Do not wash laundry that has been previously cleaned in, washed in, soaked
in, or spotted with gasoline, dry-cleaning solvents, vegetable or cooking oil,
or other flammable or explosive substances, as they give off vapors that could
ignite or explode.
· Do not add gasoline, dry cleaning solvents, or other flammable or explosive
substances to the wash water. These substances give off vapors that could
ignite or explode.
· In the event of a gas leak (propane gas, LP gas, etc.), do not operate this
or any other appliance. Open a window or door to ventilate the area
immediately.
· Do not tamper with controls. · Fix the drain hose securely in place to avoid
flooding. · Do not abuse, sit on, or stand on the door of the appliance. ·
Always check the inside of the appliance for foreign objects. · Do not allow
water, bleach or other liquids to sit in the drum for extended periods. Doing
so can corrode
the drum or cause mildew or odors. · Do not dry unwashed items in the
appliance.
Maintenance
· Do not repair or replace any part of the appliance. All repairs and
servicing must be performed by qualified service personnel unless specifically
recommended in this owner’s manual. Use only authorized factory parts.
· Disconnect this appliance from the power supply before cleaning and
attempting any user maintenance. Turning the controls to the OFF position does
not disconnect this appliance from the power supply.
· Remove any dust or foreign matter from the power plug pins. · Do not
disassemble or repair the appliance by yourself. · Remove the door before the
appliance is removed from service or discarded to avoid the danger of
children or small animals getting trapped inside. · Make sure the dispenser
drawer or lid is closed at all times when not being filled with laundry
products.
Grounding Instructions
· Improper connection of the equipment-grounding conductor can result in a
risk of electric shock. Check with a qualified electrician or service
personnel if you are in doubt whether the appliance is properly grounded. Do
not modify the plug provided with the appliance; if it will not fit the
outlet, have a proper outlet installed by a qualified electrician.
· The appliance must be grounded. In the event of a malfunction or breakdown,
grounding will reduce the risk of electric shock by providing a path of least
resistance for electric current. The appliance is equipped with a cord having
an equipment-grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is installed and grounded in
accordance with all local codes and ordinances.
en-us_main.book.book Page 6 Wednesday, November 16, 2022 4:12 PM
6 IMPORTANT SAFETY INSTRUCTIONS
CAUTION STATEMENTS
CAUTION
· To reduce the risk of minor or moderate injury to persons, malfunction, or
damage to the product or property when using this product, follow basic
precautions, including the following:
Installation
· Install the product on a firm and level floor.
Operation
· Do not place objects on top of the appliance. · Turn off the water faucets
and unplug the appliance if the appliance is to be left for an extended period
of time, such as during vacations. · ALWAYS follow the fabric care
instructions supplied by the garment manufacturer. · Use fabric softeners or
products to eliminate static only as recommended by the manufacturer. · Do not
combine laundry products for use in one load unless specified on the label. ·
Do not touch draining water which may be hot. · If the drain hose and the
water inlet hose are frozen in winter, defrost them before using the
appliance. · Do not store or spill liquid detergents, cleaners, or bleaches
(chlorine bleach, oxygen bleach) on the
appliance. Doing so may result in corrosion, discoloration or damage to the
surface of the appliance. · Clothing or articles that are waterproof or water-
resistant must be washed in the Waterproof, Bedding,
Bulky/Large, or Jumbo Wash cycle only. (Examples include water resistant
clothing, mattress covers, outdoor clothes, and plastic mats.) Failure to do
so may result in personal injury or damage to the washer, clothes, walls,
floor, and surrounding objects due to abnormal vibration.
SAVE THESE INSTRUCTIONS
ENGLISH
en-us_main.book.book Page 7 Wednesday, November 16, 2022 4:12 PM
PRODUCT OVERVIEW
PRODUCT OVERVIEW 7
Product Features
The images in this guide may be different from the actual components and
accessories, which are subject to change by the manufacturer without prior
notice for product improvement purposes.
WARNING · For your safety and for extended product life, use only authorized
components. The manufacturer is not
responsible for product malfunction, property damage or bodily injury caused
by the use of separately purchased unauthorized components, parts, or non-LG
products.
Front View
Rear View
a Control Panel b Detergent Dispenser Drawer c Door d Drain Pump Filter e Drain Hose f Drain Pump Filter Cover g Leveling Feet h Door Seal i Drum
a Water Inlets b Shipping Bolts c Power Cord d Drain Hose
en-us_main.book.book Page 8 Wednesday, November 16, 2022 4:12 PM
8 PRODUCT OVERVIEW
Accessories
Included Accessories
Optional Accessories (sold separately)
a Non-skid Pads b Hole Caps c Wrench d Tie Strap e Elbow Bracket (for securing
drain hose)
Required Accessories (sold separately)
a Pedestal
b Pedestal Washer
c Stacking Kit
Check the width of the pedestal before purchasing to make sure that it matches
the width of your appliance (27″ (70 cm) or 29″ (74 cm)).
a Hot and Cold Water Hoses
Product Specifications
Model Electrical Requirements Min. / Max. Water Pressure Dimensions (Width X
Height X
Depth) Maximum Depth with Door
Open Net Weight Max. Spin Speed
WM5500H*A
WM6500H*A
120 V~, 60 Hz
20 psi – 120 psi (138 kPa – 827 kPa)
27” X 39″ X 30 1/4” (70 cm X 99 cm 27” X 39″ X 33 1/8” (70 cm X 99 cm
X 77 cm)
X 84 cm)
55” (139.6 cm)
57 3/4” (146.6 cm)
200.8 lb (91.1 kg)
1300 RPM
202.6 lb (91.9 kg)
ENGLISH
en-us_main.book.book Page 9 Wednesday, November 16, 2022 4:12 PM
INSTALLATION
INSTALLATION 9
Before Installing
Installation Overview
Please read the following installation instructions first after purchasing
this washer or transporting it to another location.
a
b
c
e
f
a Choosing the Proper Location b Unpacking and Removing Shipping Material c Connecting the Inlet Hoses d Connecting the Drain Hose e Leveling the Washer f Final Installation Check
WARNING
· Moving or installation of the appliance requires two or more people. Failure
to follow these instructions may result in injury.
· Store and install the appliance where it will not be exposed to temperatures
below freezing or exposed to outdoor weather conditions. Failure to follow
this warning can cause product or part failure, serious injury, fire, electric
shock, or death.
· Properly ground the washer to conform with all governing codes and
ordinances. Failure to follow this warning can cause serious injury, fire,
electric shock, or death.
· To ensure proper airflow, do not block the large opening on the bottom of
the washer with carpeting or other materials.
· Do not remove the ground prong from the power cord. Do not use an adapter or
extension cord. Plug into a grounded 3-prong outlet. Failure to follow this
warning can cause serious injury, fire, electric shock, or death.
en-us_main.book.book Page 10 Wednesday, November 16, 2022 4:12 PM
10 INSTALLATION
WARNING · Certain internal parts are intentionally not grounded and may
present a risk of electric shock only during
servicing. Service personnel- Do not contact the following parts while the
appliance is energized: pump, valve, motor, control board.
Tools Needed
· It is the personal responsibility and obligation of the washer owner to have a proper outlet installed by a qualified electrician.
a Pliers
b Flat-Blade Screwdriver
c Level
Choosing the Proper Location
Check the following requirements for the install location before installing
the washer.
· Allow for sufficient space between the walls and the washer for
installation.
· Make sure that the floor is clean, dry and free of dust, dirt, water and oil
so the leveling feet cannot slide easily. Leveling feet that can move or slide
on the floor can contribute to excess vibration and noise.
· If the floor has too much flex, reinforce it to make it more rigid. If the
floor is not solid, it may cause severe vibration and noise.
· If a drain pan must be used, take extra care to follow the instructions
provided with the drain pan and make sure the leveling feet are adjusted for
firm and even contact with the pan. Use of drain pans and failure to properly
level the washer may result in increased vibration and noise during operation.
Power Outlet
· The power outlet must be within 60 inches (1.5 m) of either side of the
washer.
· Position the washer so that the outlet and plug are easily accessible.
· Do not overload the outlet with more than one appliance.
· The outlet must be grounded in accordance with current electrical wiring
codes and regulations.
· Use a time-delay fuse or circuit breaker.
Flooring
· To minimize noise and vibration, install the washer on a level, solidly
constructed floor capable of supporting the washer without flexing or
bouncing.
· The washer must be installed on firm flooring to minimize vibration during
the spin cycle. Concrete flooring is best, but a wood floor is sufficient,
provided it is built to FHA standards.
· The floor under the washer must not slope more than 1 inch (2.5 cm) from
front to back or side to side.
· Installing on carpeting and soft tile surfaces is not recommended.
· Never install the washer on a platform or weakly supported structure.
Floor Installation To ensure sufficient clearance for water inlet hoses, drain
hose and airflow, allow minimum clearances of at least 1 inch (2.5 cm) at the
sides and 4 inches (10 cm) behind the washer. Be sure to allow for wall, door,
or floor moldings that may increase the required clearances.
Dimensions and Clearances
Model
WM5500H*A
WM6500H*A
A
55” (139.6 cm)
57 3/4” (146.6
cm)
B
30 1/4” (77 cm) 33 1/8” (84 cm)
C
4” (10 cm)
ENGLISH
en-us_main.book.book Page 11 Wednesday, November 16, 2022 4:12 PM
INSTALLATION 11
Dimensions and Clearances
Model
WM5500H*A
WM6500H*A
D
1” (2.5 cm)
E
27” (70 cm)
F
1/4” (0.5 cm)
Stacking or Pedestal Installation The washer can be stacked under a dryer or on top of a pedestal or pedestal washer.
CAUTION · Failure to remove shipping materials can cause
excessive noise and vibration.
Unpacking Shipping Material
Some models do not ship with drum support. Lift the washer off the foam base. · After removing the carton and shipping
material, lift the washer off the foam base. · Make sure the plastic drum
support a comes
off with the base and is not stuck to the bottom of the washer. · If you must
lay the washer down to remove the carton base b, always protect the side of
the washer and lay it carefully on its side. Do not lay the washer on its
front or back.
D
Dimensions and Clearances
Model
WM5500H*A
WM6500H*A
A
30 1/4” (77 cm)
33 1/8″ (84 cm)
B
4” (10 cm)
C
1” (2.5 cm)
D
27” (70 cm)
E
77 1/2” (196.8 cm)
F
1/4” (0.5 cm)
NOTE
· Refer to the instructions packaged with the optional pedestal kit before
stacking appliance on pedestal.
· Do not use a drain pan with a pedestal or pedestal washer installation as it
can block the drawer. Using a drain pan may result in increased vibration and
noise during operation.
- Removing Shipping Material
1 Remove the bolt assemblies.
· Starting with the bottom two shipping bolts c , use the included wrench to fully loosen all 4 shipping bolts by turning them counterclockwise.
· Remove the bolt assemblies (bolts and retainers) by wiggling them slightly while pulling them out.
Unpacking and Removing Shipping Material
Remove all shipping materials from the washer for proper operation and inspect
it for shipping damage.
2 Install the hole caps.
· Locate the hole caps d included in the accessory pack or attached to the
back of
en-us_main.book.book Page 12 Wednesday, November 16, 2022 4:12 PM
12 INSTALLATION
the washer. Install the caps in the holes left by the bolt assemblies.
CAUTION · Once removed, save the bolt assemblies for
future use. To prevent damage to internal components, do not transport the
washer without reinstalling the shipping bolts. Failure to remove shipping
bolts and retainers may cause severe vibration and noise, which can lead to
permanent damage to the washer.
NOTE · The power cord is secured to the back of the
washer with a shipping bolt to help prevent operation with shipping bolts in
place.
Connecting the Water Inlet Hoses
To avoid the risk of costly water damage, purchase and install new water inlet
hoses when installing the washer.
WARNING · Do not overtighten the hoses or cross-thread the
hose fittings. Overtightening or cross-threading can damage the valves or
couplings, resulting in leaking and property damage. · Do not reuse old hoses.
Use only new hoses when installing the washer. Old hoses could leak or burst
causing flooding and property damage. Contact an LG Customer Information
Center for assistance in buying hoses.
· Water supply pressure must be between 20 psi and 120 psi (138 – 827 kPa). If
the water supply pressure is more than 120 psi, a pressure reducing valve must
be installed.
· Your hot water heater should be set to deliver water at 120135 °F (4857
°C) to allow the washer to properly control wash temperatures.
· Do not store or install the washer in a location subject to freezing
temperatures. Damage to the water inlet hoses and internal mechanisms of the
washer can result. If the washer was exposed to freezing temperatures prior to
installation, allow it to stand at room temperature for several hours before
use and check for leaks prior to operation.
· Do not use flood-preventing hoses with auto shut off devices. The devices
can be tripped during fill and prevent the washer from filling properly.
How to Connect the Water Inlet Hoses
1 Check the fittings and seals. Inspect the
threaded fitting on each hose and make sure there is a rubber seal a in place
in both ends of each hose to prevent leaking.
2 Connect the water supply hoses.
· Connect the water inlet hoses to the hot and cold water faucets tightly by
hand and then tighten another 2/3 turn with pliers.
· Connect the blue hose to the cold water faucet and the red hose to the hot
water faucet.
NOTE
· Periodically check the hoses for cracks, leaks, and wear, and replace the
hoses every five years.
· Do not stretch the water hoses intentionally, and make sure that they are
not pinched, crushed or kinked by other objects.
3 Flush out the inlet hoses.
· After the hoses are connected, turn on the water faucets and flush out any
foreign substances such as dirt, sand, or sawdust.
ENGLISH
en-us_main.book.book Page 13 Wednesday, November 16, 2022 4:12 PM
· Let the water drain into a bucket, and check the water temperature to make sure you’ve connected the hoses to the correct faucets.
INSTALLATION 13
beyond 66″ (168 cm), the drain function will be increasingly affected.
· Never create an airtight seal between the hose and the drain with tape or
other means. If no air gap is present, water can be siphoned out of the drum
resulting in poor wash/rinse performance or clothing damage.
4 Attach the inlet hoses to the back of the
washer.
· Attach the hot water inlet hose to the hot water inlet on the back of the
washer. Attach the cold water inlet hose to the cold water inlet on the back
of the washer.
· Tighten the fittings securely. Turn on both faucets all the way and check
for leaks at both ends of the hoses.
Using a Standpipe to Drain
1 Clip the end of the hose into the elbow
bracket. · Connect the elbow bracket a within 4
inches (10 cm) of the end of the drain hose. If the drain hose is extended
more than 4 inches (10 cm) beyond the end of the elbow bracket, mold or
microorganisms could spread to the inside of the washer.
4 ” (10 cm)
2 Insert the end of the drain hose into the
standpipe.
Connecting the Drain Hose
Connect the drain hose to either a standpipe or laundry tub.
WARNING · The drain hose should always be properly
secured. Failure to properly secure the drain hose can result in flooding and
property damage.
3 Use the provided tie strap b to secure the
drain hose in place.
NOTE
· The drain must be installed in accordance with any applicable local codes
and regulations.
· Make sure that the drain hose is not stretched, pinched, crushed, or kinked.
· The end of the drain hose should be located a minimum of 24″ (61 cm) and a
maximum of 96″ (244 cm) above the bottom of the washer.
· For best results, locate the end of the drain hose no higher than 66″ (168
cm) above the bottom of the washer. As the drain outlet is raised
4 If the water valves and drain are built into the
wall, fasten the drain hose to one of the water
en-us_main.book.book Page 14 Wednesday, November 16, 2022 4:12 PM
14 INSTALLATION
hoses with the provided tie strap c (ribbed side on inside).
24 – 96 ” (61 – 244 cm)
24 – 96 ” (61 – 244 cm)
Using the Laundry Tub to Drain
1 Clip the end of the hose into the elbow
bracket.
· Connect the elbow bracket a within 4 inches (10 cm) of the end of the drain
hose. If the drain hose is extended more than 4 inches (10 cm) beyond the end
of the elbow bracket, mold or microorganisms could spread to the inside of the
washer.
Leveling the Washer
The drum of the washer spins at very high speeds. To minimize vibration,
noise, and unwanted movement, the floor must be a solid, level surface.
CAUTION · Using the washer without leveling it may cause
excess vibration and noise, leading to a washer malfunction. · Adjust the
leveling feet only as far as necessary to level the washer. Extending the
leveling feet more than necessary can cause the washer to vibrate.
NOTE · Before installing the washer, make sure that the
floor is clean, dry and free of dust, dirt, water and oil so the washer feet
cannot slide easily. Feet that move or slide on the floor can contribute to
excessive vibration and noise.
4 ” (10 cm)
2 Hang the end of the drain hose over the side
of the laundry tub.
How to Level the Washer
1 Position the washer in its final location.
· Take special care not to pinch, strain, or crush the water and drain hoses.
If you have a carpenter’s level a, you can use it to check that the washer is
level. The slope beneath the washer should not exceed 1 inch, and all 4
leveling feet must rest firmly on the floor.
3 Use the provided tie strap to secure the drain
hose in place.
en-us_main.book.book Page 15 Wednesday, November 16, 2022 4:12 PM
2 Adjust the leveling feet.
· Turn all 4 leveling feet in one direction to raise the washer or the other
direction to lower it.
INSTALLATION 15
leveling feet, place them under the back leveling feet.
ENGLISH
a This side up b Remove backing
3 Check the level again.
· Push or rock the top edges of the washer gently to make sure the washer does
not rock. If the washer rocks, readjust the leveling feet.
4 Recheck the washer’s levelness.
· Push or rock the top edges of the washer gently to make sure the washer does
not rock. If the washer rocks, level the washer again.
4 Tighten the locknuts b
· Turn the locknuts counterclockwise and tighten them when the washer is
level.
Using Non-Skid Pads
If you install the washer on a slippery surface, it may move because of
excessive vibration. Incorrect leveling may cause malfunction through noise
and vibration. If this occurs, install the nonskid pads under the leveling
feet and adjust the level.
1 Clean the floor to attach the non-skid pads.
· Use a dry rag to remove and clean foreign objects or moisture. If moisture
remains, the non-skid pads may slip.
2 Adjust the level after placing the washer in the
installation area.
3 Place the adhesive side c of the non-skid pad
on the floor. · It is most effective to install the non-skid
pads under the front leveling feet. If it is hard to place the pads under the
front
Final Installation Check
Connecting to the Power Supply
Plug the washer into a 120 V, 60 Hz grounded 3prong outlet.
WARNING
· Do not use a worn or damaged power cord or power plug. Replace or repair it
immediately. Failure to do so may result in death, fire, electric shock, or
malfunction.
· Do not modify the power cord and plug provided with the appliance. Do not
damage it when installing or moving the appliance. Doing so may result in
death, fire, electric shock, or malfunction.
· Make sure that the appliance is grounded.
· Connect this appliance to a grounded outlet conforming to the rating prior
to use. Failure to do so may result in fire, electric shock, or malfunction.
· Do not damage or cut off the ground prong of the power cord. Doing so may
cause death, fire, electric shock, or product malfunction.
· Improper connection of the equipment grounding conductor can result in risk
of electric shock. Check with a qualified electrician or service technician if
you are in doubt as to whether the appliance is properly grounded. If the plug
does not fit the outlet, have a proper outlet installed by a qualified
electrician.
· The appliance and outlet must be positioned so that the plug is easily
accessible.
en-us_main.book.book Page 16 Wednesday, November 16, 2022 4:12 PM
16 INSTALLATION
WARNING · Do not use an adapter or extension cord. Doing
so may result in serious injury, fire, electric shock, or death. · For best
performance, plug the appliance into its own individual outlet. This helps
prevent overloading house wiring circuits which could cause a fire hazard from
overheated wires. · If necessary, use a new, UL-listed extension cord with a
3-prong (grounding) plug rated at no less than the branch circuit. Do not use
an extension cord longer than 3 feet. Failure to follow these warnings may
result in serious injury, fire, electric shock, or death.
Testing the Washer
Check if the washer is properly installed and run a test cycle.
1 Load the washer with 6 thick bath towels
(approximately 6 pounds).
2 Press the Power button.
3 Turn the knob and select the Quick Wash
cycle.
4 Press the Start/Pause button to start the
wash cycle.
5 Make sure that water is supplied, that the
washer does not rock or vibrate excessively, and that it drains well during
the spin cycle.
NOTE · If water leaks during water supply, see
Connecting the Water Inlet Hoses to connect them properly. · If the washer
rocks and vibrates excessively, see Leveling the Washer to level it again. ·
If the drain does not work, see Connecting the Drain Hose to install the hose
properly.
en-us_main.book.book Page 17 Wednesday, November 16, 2022 4:12 PM
ENGLISH
OPERATION
OPERATION 17
Before Use
WARNING
· To reduce the risk of fire, electric shock, or injury to persons, read the
SAFETY INSTRUCTIONS before operating this appliance.
Operation Overview
1 Sort laundry and load the washer.
· Sort laundry by fabric type, soil level, color and load size as needed. Open
the door and load items into the washer.
· If using single-use detergent packs, or gel or tablet detergents, place them
in the drum before loading the laundry.
2 Add cleaning products.
· Add the proper amount of HE (High-Efficiency) detergent to the detergent
dispenser. · If desired, add bleach or fabric softener to the appropriate
areas of the dispenser drawer. · Do not place liquid or powdered detergent
packs, or gel or tablet detergents in the dispenser.
3 Turn on the washer.
· Press the Power button to turn on the washer.
4 Select a cycle.
· Turn the cycle selector knob until the desired cycle is selected and press
the 8(OK) button.
· The preset wash temperature, spin speed, soil level and option settings for
the selected cycle are shown.
· The Normal cycle must be selected in order to change its default settings. ·
Pressing the Start/Pause button without selecting a cycle immediately starts
the Normal cycle with
the default settings.
5 Adjust settings.
· Default settings for the selected cycle can be changed, if desired, using
the cycle modifier and option buttons.
· Not all modifiers and options are available on all cycles. A different chime
sounds and the LED does not light up if the selection is not allowed.
6 Begin cycle.
· Press the Start/Pause button to begin the cycle. The door locks, and the
washer agitates briefly without water to measure the weight of the load.
· If the Start/Pause button is not pressed within a certain time, the washer
shuts off and all settings are lost.
en-us_main.book.book Page 18 Wednesday, November 16, 2022 4:12 PM
18 OPERATION
7 End of cycle.
· When the cycle is finished, a melody sounds. Immediately remove the clothing
from the washer to reduce wrinkling.
· Check around the door seal when removing the load for small items that may
be caught in the seal.
NOTE · The washer rotates the laundry in a way that allows it to use less
water while still fully saturating the
clothing. It is normal to be unable to see water during the wash cycle. · If
the temperature or the water level inside the machine is too high, the door
will not unlock when the
Start/Pause button is pressed, and the Add Garments function will not be
available (on applicable models). To stop a cycle and drain the water
completely, turn the power off, then on, and then select Quick Wash.
Loading the Washer
General Tips
· Check and empty pockets. Paper clips, coins, matches, and other items can
damage clothing and the washer.
· Close zippers and hooks, and tie drawstrings to prevent snagging or tangling
of clothes.
· Pretreat heavily stained areas for best results.
· Brush off heavy soil, dust, and hair from items before washing. Excess dirt
or sand can abrade other fabrics and lead to poor wash performance.
· For best performance, load clothes as shown.
CAUTION · Clothing or articles that are waterproof or water-
resistant must be washed in the Waterproof, Bedding, Bulky/Large, or Jumbo
Wash cycle only. (Examples include water resistant clothing, mattress covers,
outdoor clothes, and plastic mats.) Failure to do so may result in personal
injury or damage to the washer, clothes, walls, floor, and surrounding objects
due to abnormal vibration.
Bulky Items
· Wash thick, bulky items individually. Heavy blankets, comforters,
bedspreads, or pet beds can get tangled or cause an unbalanced load if
combined with other items.
– Do not press down on items while stacking them in the drum.
– Load clothes loosely, and do not overfill the drum. Clothes need room to
circulate in order to get clean.
· Combine large and small items in the drum. Load large items first. Large
items should not be more than half of the total load.
· The washer can be fully loaded, but the drum should not be tightly packed
with items. The door of the washer must close easily.
· The washer will not fill or operate with the door open.
Small Items
· Do not wash a single small item. Add enough similar items to the load to
prevent an out-ofbalance load.
· Wash small, light items in a mesh bag. Small items can get caught in the
impeller at the bottom of the drum, and brassiere hooks can snag on other
clothing or the drum.
Additional Operation Information
The complete owner’s manual can be found on the LG website at: http://gscs-
manual.lge.com/
en-us_main.book.book Page 19 Wednesday, November 16, 2022 4:12 PM
Total/DFZ/NA/FL/FX/main.html or by scanning the QR code.
· Sorting Laundry · Adding Cleaning Products · Control Panel · Wash Cycles ·
Cycle Modifiers · Options and Extra Functions
OPERATION 19
ENGLISH
en-us_main.book.book Page 20 Wednesday, November 16, 2022 4:12 PM
20 SMART FUNCTIONS
SMART FUNCTIONS
Using LG ThinQ Application
The LG ThinQ application allows you to communicate with the appliance using a
smartphone.
LG ThinQ Application Features
For the product that contains the Wireless LAN module
· Remote Start – Control the appliance remotely from the LG ThinQ application.
· Downloaded – Download new and specialized cycles that are not included in
the standard cycles on the appliance.
· Tub Clean Coach – Find out how many cycles remain before it is time to run
the Tub Clean cycle.
· Energy Monitoring – Keep track of the washer’s power consumption and how it
is affected by your selected wash cycles and options.
· Smart DiagnosisTM – This function provides useful information for diagnosing
and solving issues with the appliance based on the pattern of use.
· Push Alerts – When the cycle is complete or the appliance has problems, you
will receive a push message.
· Settings – Set various options on the appliance and in the application.
NOTE · If you change your wireless router, Internet
service provider, or password, delete the connected appliance from the LG
ThinQ application and connect it again. · This information is current at the
time of publication. The application is subject to change for product
improvement purposes without notice to users.
Installing LG ThinQ Application and Connecting an LG Appliance
Models with QR Code
Scan the QR code attached to the product using the camera or a QR code reader
application on your smartphone.
Models without QR Code
1 Search for and install the LG ThinQ
application from the Google Play Store or Apple App Store on a smartphone.
2 Run the LG ThinQ application and sign in with
your existing account or create an LG account to sign in.
3 Touch the add (~) button on the LG ThinQ
application to connect your LG appliance. Follow the instructions in the
application to complete the process.
NOTE · You may be asked to provide a password to
connect to the LG network (not your home network) during the Wi-Fi setup. The
password is the last 4 characters of the network name, repeated twice, with no
spaces. For example, if the network name appears as LG_XXXX_8b92, then you
would enter 8b928b92 as your password. The password is case sensitive and the
last 4 characters are unique to your appliance. · To verify the Wi-Fi
connection, check that the WiFi indicator on the control panel is lit. · The
appliance supports 2.4 GHz Wi-Fi networks only. To check your network
frequency, contact
en-us_main.book.book Page 21 Wednesday, November 16, 2022 4:12 PM
ENGLISH
your Internet service provider or refer to your wireless router manual.
· LG ThinQ is not responsible for any network connection problems or any
faults, malfunctions, or errors caused by network connection.
· The surrounding wireless environment can make the wireless network service
run slowly.
· If the distance between the appliance and the wireless router is too far,
the signal becomes weak. It may take a long time to connect or fail to install
the application.
· If the appliance is having trouble connecting to the Wi-Fi network, it may
be too far from the router. Purchase a Wi-Fi repeater (range extender) to
improve the Wi-Fi signal strength.
· The network connection may not work properly depending on the Internet
service provider.
· The Wi-Fi may not connect or the connection may be interrupted because of
the home network environment.
· If the appliance cannot be connected due to problems with the wireless
signal transmission, unplug the appliance and wait about a minute before
trying again.
· If the firewall on your wireless router is enabled, disable the firewall or
add an exception to it.
· The wireless network name (SSID) should be a combination of English letters
and numbers. (Do not use special characters.)
· Smartphone user interface (UI) may vary depending on the mobile operating
system (OS) and the manufacturer.
· If the security protocol of the router is set to WEP, network setup may
fail. Change the security protocol (WPA2 is recommended), and connect the
product again.
· To disable the Wi-Fi function, press and hold the Wi-Fi button for 3
seconds. The Wi-Fi indicator will be turned off.
· To reconnect the appliance or add another user, press and hold the Wi-Fi
button for 3 seconds to temporarily turn it off. Run the LG ThinQ application
and follow the instructions in the application to connect the appliance.
Using the Appliance Remotely
Remote Start
Use a smartphone to control your appliance remotely. You can also monitor your
cycle operation so you know how much time is left in the cycle.
SMART FUNCTIONS 21
Using Remote Start
1 Put the laundry in the drum. Add detergent to
the detergent dispenser drawer. · If desired, add bleach to the appropriate
section of the dispenser.
2 Press the Power button.
3 Press the Options button, turn the knob to
select Remote Start and press the 8(OK)
button.
4 Turn the knob to select On and press the
8(OK) button to enable the remote control
function.
5 Start a cycle from the LG ThinQ application on
your smartphone.
NOTE · Once this function is enabled, you can only start
a cycle from the LG ThinQ smartphone application. If the cycle is not started,
the appliance will wait to start the cycle until it is turned off remotely
from the application or the remote function is disabled. · If the door has
been opened, you cannot start a cycle remotely.
Disabling Remote Start Manually When the function is activated, press the
Options button, turn the knob to select Remote Start and
press the 8(OK) button. Turn the knob to select Off and press the 8(OK)
button.
Download Cycle
You can download new and specialized cycles that are not included in the
standard cycles on the appliance. Appliances that have been successfully
connected can download a variety of specialty cycles specific to the
appliance. Once cycle download is completed in the appliance, the product
keeps the downloaded cycle until a new cycle is downloaded.
NOTE · Only one downloaded cycle can be stored on the
appliance at a time.
en-us_main.book.book Page 22 Wednesday, November 16, 2022 4:12 PM
22 SMART FUNCTIONS
Radio Equipment Specifications
To identify the RF module installed in the appliance, refer to the label
attached to the appliance.
Type Wireless LAN
Bluetooth
Frequency Range
2412 – 2462 MHz
2402 – 2480 MHz
Output Power (Max)
< 30 dBm
FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be colocated or operating
in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of 20
cm (7.8 inches) between the antenna and your body. Users must follow the
specific operating instructions for satisfying RF exposure compliance.
FCC Notice
The following notice covers the transmitter module contained in this product.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and the receiver.
· Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Any changes or modifications in construction of this device which are not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Industry Canada Statement
This device contains licence-exempt transmitter(s)/ receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licenceexempt
RSS(s). Operation is subject to the following two conditions: (1) This device
may not cause interference. (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm (7.8 inches) between the antenna and your body.
NOTE · THE MANUFACTURER IS NOT RESPONSIBLE FOR
ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.
Open Source Software Notice Information
To obtain the source code that is contained in this product, under GPL, LGPL,
MPL, and other open source licenses that have the obligation to disclose
source code, and to access all referred license terms, copyright notices and
other relevant documents, please visit https:// opensource.lge.com.
en-us_main.book.book Page 23 Wednesday, November 16, 2022 4:12 PM
ENGLISH
LG Electronics will also provide open source code to you on CD-ROM for a
charge covering the cost of performing such distribution (such as the cost of
media, shipping, and handling) upon email request to opensource@lge.com.
This offer is valid to anyone in receipt of this information for a period of
three years after our last shipment of this product.
Smart DiagnosisTM Function
Use this feature to help you diagnose and solve problems with your appliance.
NOTE · For reasons not attributable to LGE’s negligence,
the service may not operate due to external factors such as, but not limited
to, Wi-Fi unavailability, Wi-Fi disconnection, local app store policy, or app
unavailability.
· The feature may be subject to change without prior notice and may have a
different form depending on where you are located.
SMART FUNCTIONS 23
4 Turn the knob to select Smart Diagnosis and
press the 8(OK) button.
5 Place the mouthpiece of your smartphone
close to the Power button and press the
8(OK) button.
· Hold the smartphone mouthpiece to the Power button until the data transfer
is complete.
1M0 amxm.
6 After the data transfer is complete, the
washer will turn off.
NOTE · For best results, do not move the smartphone
while the tones are being transmitted.
Using LG ThinQ to Diagnose Issues
If you experience a problem with your Wi-Fi equipped appliance, it can
transmit troubleshooting data to a smartphone using the LG ThinQ application.
· Launch the LG ThinQ application and select the Smart DiagnosisTM feature in
the menu. Follow the instructions provided in the LG ThinQ application.
Using Audible Diagnosis to Diagnose Issues
Follow the instructions below to use the audible diagnosis method. · Launch
the LG ThinQ application and select the
Smart DiagnosisTM feature in the menu. Follow the instructions for audible
diagnosis provided in the LG ThinQ application.
1 Press the Power button to turn on the
appliance.
2 Press the Options button.
3 Turn the knob to select Additional Settings
and press the 8(OK) button.
en-us_main.book.book Page 24 Wednesday, November 16, 2022 4:12 PM
24 MAINTENANCE
MAINTENANCE
WARNING · To reduce the risk of fire, electric shock, or injury
to persons, read this entire owner’s manual, including the SAFETY
INSTRUCTIONS, before operating this appliance. · Unplug the appliance before
cleaning to avoid the risk of electric shock. Failure to follow this warning
can cause serious injury, fire, electric shock, or death. · Do not use
volatile substances (benzene, paint thinner, alcohol, acetone, etc.), abrasive
cleaners, or detergents with strong chemical components when cleaning the
appliance. Doing so may cause discoloration or damage to the appliance, or may
cause a fire. · Certain internal parts are intentionally not grounded and may
present a risk of electric shock only during servicing. Service personnel Do
not contact the following parts while the appliance is energized: pump, valve,
motor, control board.
Regular Cleaning
Care after Wash
After the cycle is finished, wipe the door and the inside of the door seal to
remove any moisture. · Wipe the body of the washer with a dry cloth to
remove any moisture. · Leave the door open to dry the drum interior.
WARNING · Make sure children and pets do not climb into
the drum. Engage the Control Lock feature if needed to prevent children from
accidentally starting a wash cycle.
Cleaning the Exterior
Proper care of your washer can extend its life.
Door: Wash with a damp cloth on the outside and inside and then dry with a
soft cloth.
Exterior: · Immediately wipe off any spills.
· Wipe with a damp cloth.
· Do not touch the surface or the display with sharp objects.
Periodic Maintenance
· Use a towel or soft cloth to wipe around the washer door opening and door
glass.
· Always remove items from the washer as soon as the cycle is complete.
Leaving damp items in the washer can cause wrinkling, color transfer, and
odor.
Cleaning the Drum
Over time, residue may build up in the drum, leading to mildew or a musty
odor. Run the Tub Clean cycle monthly to remove residue and prevent odor.
NOTE · Make sure to run the Tub Clean cycle only when
the drum is empty. Never load laundry while using this cycle. The laundry may
be damaged or contaminated with cleaning products.
· Run the cycle more often under heavy use conditions or if odor is already
present.
· If mildew or musty smell already exists, run this cycle once a week for
three consecutive weeks.
1 Remove any clothing from the drum.
2 Add cleaning agents.
Cleaner
Instructions
Drum cleaner
Lime scale remover
Add to main detergent compartment of detergent dispenser
Liquid chlorine bleach
Add to bleach compartment of detergent dispenser.
Powdered cleaner
Pull out liquid detergent cup before adding to main detergent compartment
Cleaning tablets
Place directly into the washer drum.
· For other drum cleaning products, follow the cleaner manufacturer’s instructions and recommendations.
ENGLISH
en-us_main.book.book Page 25 Wednesday, November 16, 2022 4:12 PM
· Do not exceed the maximum fill line when adding bleach or powdered cleaners.
Powdered cleaners may remain in the drum after cleaning.
3 Close the door and press the Power button.
4 Select the Tub Clean cycle and press the
Start/Pause button to begin the cycle.
5 After the cycle ends, open the door and allow
the drum interior to dry completely.
WARNING · Make sure children and pets do not climb into
the drum. Engage the Control Lock feature if needed to prevent children from
accidentally starting a wash cycle.
NOTE · If you use a descaler or drum cleaner during the
Tub Clean cycle, use the Rinse+Spin option to rinse the washer drum before
running your next wash cycle.
MAINTENANCE 25
Cleaning the Dispenser Drawer
Leaving detergent in the detergent dispenser drawer for an extended period of
time or using the washer for a long period of time may cause the build-up of
residue in the detergent dispenser drawer. Remove and clean the detergent
dispenser drawer once or twice a month.
WARNING · Do not spray water inside the washer. Doing so
may cause fire or electric shock.
1 Turn off the washer, and unplug the power
cord.
2 Pull the drawer straight out until it stops.
3 Press down hard on the disengage button a
and pull the drawer completely out.
Removing Mineral Buildup
In areas with hard water, mineral scale can form on internal components of the
washer. Periodically clean the mineral buildup on the internal components to
extend the lifespan of the washer. Use of a water softener is recommended in
areas with hard water.
· Use a descaler to remove visible mineral buildup on the washer drum.
· After descaling, always run the Tub Clean cycle before washing clothing.
· Mineral scale and other spots may be removed from the stainless steel drum
using a soft cloth soaked in stainless steel cleaner.
· Do not use steel wool or abrasive cleaners.
Leaving the Door Open
After you finish using the washer, leave the door open overnight to allow air
to circulate and dry the drum. This helps prevent odors.
4 Remove the inserts from the drawer.
5 Clean the inserts and drawer with warm
water. · Use a soft cloth or brush to clean and to
remove any residue. · Do not use soap when cleaning the drawer
and inserts.
6 Wipe off any moisture with a dry towel or
cloth after cleaning.
7 To clean the drawer opening, use a small,
non-metal brush to clean the recess. Remove all residue from the upper and
lower parts of the recess.
8 Replace the drawer.
en-us_main.book.book Page 26 Wednesday, November 16, 2022 4:12 PM
26 MAINTENANCE
CAUTION
· Do not use the washer without the inlet filters. Doing so will cause leaks
and malfunction.
· If you use the washer in an area with hard water, the inlet filter may clog
due to lime buildup and require more frequent cleaning.
Cleaning the Door Seal
Clean the door seal once a month to prevent build-up of dirt.
CAUTION · Cleaning the door seal with undiluted bleach
may cause malfunction of the door seal and washer parts. You must add water to
the bleach before using it.
1 Wear rubber gloves and protective goggles.
1 Turn off the washer, and unplug the power
cord.
2 Turn off hot and cold water faucets.
3 Unscrew the hot and cold water hoses from
the back of the washer.
4 Remove the filters from the water valves
carefully. · Use pliers to pull out the filters from the
water valves.
2 Dilute 3/4 cup (177 mL) of liquid chlorine
bleach in 1 gallon (3.8 L) of water.
3 Wipe around the door seal.
· Soak a sponge or a soft cloth in this diluted solution and wipe all around
the door seal.
4 Wipe up any moisture with a dry towel or
cloth after cleaning.
5 Leave the door open to allow the door seal to
dry completely.
Cleaning the Water Inlet Filters
If the washer does not fill properly, an error message will appear on the
display. The inlet valve filter screens could be clogged by hard water scale,
sediment in the water supply, or other debris.
WARNING · The inlet screens protect the delicate parts of the
inlet valve from being damaged by particles that could enter the valves with
the water supply. Operating the washer with these filters removed could cause
a valve to open continuously, resulting in flooding and/or property damage.
5 Remove foreign objects and soak the filters in
white vinegar or a lime scale remover. · If using a lime scale remover, follow
the
manufacturer’s instructions. Be careful not to damage the filters while
cleaning them.
6 Rinse filters thoroughly and press them back
into place.
7 Flush then reattach the water hoses.
· Before reattaching the water inlet hoses, flush them by running several
gallons of water through them into a bucket or drain, preferably with the
faucets wide open for maximum flow.
NOTE · A Water supply error message appears on the
display when the water pressure is low or an inlet filter is clogged with
dirt. Clean the inlet filter.
ENGLISH
en-us_main.book.book Page 27 Wednesday, November 16, 2022 4:12 PM
Cleaning the Drain Pump Filter
The washer fails to drain if the drain pump filter is clogged. Periodically
clean the drain filter to prevent clogging with foreign objects.
WARNING · Opening the drain filter will result in water
overflowing if there is water in the drum. Use a bucket if the drum is not
completely drained before you open the drain filter. · Using the washer
without the drain filter or with an incorrectly assembled drain filter may
cause leaks or malfunction of the washer.
1 Turn off the washer, and unplug the power
cord.
2 Open the drain pump filter cover.
MAINTENANCE 27
5 Clean the pump filter and opening.
6 Reassemble the plug onto the drain hose and
reclip the drain hose.
3 Drain any remaining water.
· Unclip the drain hose and remove the plug from the drain hose to drain the
remaining water.
7 Insert the drain pump filter and twist it
clockwise.
4 Remove the pump filter.
· Twist the pump filter counterclockwise to remove.
8 Close the drain pump filter cover.
NOTE · A Drainage message appears on the display
when the drain pump filter is clogged with dirt. Clean the drain pump filter.
en-us_main.book.book Page 28 Wednesday, November 16, 2022 4:12 PM
28 MAINTENANCE
Care in Cold Climates
Storing the Washer
If the washer will not be used for an extended period of time and is in an
area that could be exposed to freezing temperatures, follow these steps to
protect the washer from damage.
NOTE · Make sure the drum is empty before following
these steps.
1 Turn off the washer, and unplug the power
cord.
2 Turn off the water faucets.
3 Disconnect the water inlet hoses. Drain any
water from the hoses.
9 Dry the drum interior with a soft cloth, and
close the door.
10 Store the washer in an upright position.
11 Remove the inserts from the dispenser. Drain
any water in the compartments and let them dry.
12 To remove the antifreeze from the washer
after storage, run the Rinse+Spin cycle using detergent. · Do not add laundry
to this cycle.
When the Water Inlet Hoses Are Frozen
1 Turn off the washer, and unplug the power
cord.
2 Turn off the faucets connected to the water
inlet hoses.
3 Pour hot water on the frozen faucets to thaw
the water inlet hoses and remove the water inlet hoses.
4 Plug the power cord into a properly grounded
electrical outlet.
4 Immerse the water inlet hoses in hot water to
thaw them.
5 Add 1 gallon of nontoxic recreational vehicle
(RV) antifreeze to the empty drum and close the door.
· Never use automotive antifreeze.
5 Reconnect the water inlet hoses to the water
inlets of the washer and to the faucets.
· See Connecting the Water Inlet Hoses for details.
6 Turn on the washer and press the Spin
button.
7 Press the Start/Pause button to start the
drain pump for 1 minute. · This will expel some of the antifreeze,
leaving enough to protect the washer from damage.
8 Turn off the washer and unplug the power
cord.
6 Turn on the faucets.
7 Press the Power button to turn on the
washer.
8 Turn the knob to select Spin Only cycle for
draining and spinning.
9 Press the Start/Pause button.
en-us_main.book.book Page 29 Wednesday, November 16, 2022 4:12 PM
When the Drain Hose Is Frozen
1 Pour hot water in the washer drum and close
the door.
2 Wait for 1 – 2 hours. 3 Press the Power button. 4 Turn the knob to select
Spin Only cycle for
draining and spinning.
5 Press the Start/Pause button to make sure
the water drains.
MAINTENANCE 29
ENGLISH
en-us_main.book.book Page 30 Wednesday, November 16, 2022 4:12 PM
30 TROUBLESHOOTING
TROUBLESHOOTING
Before Calling for Service
The washer is equipped with an automatic error-monitoring system to detect and
diagnose problems at an early stage. If the washer does not function properly
or does not function at all, check the following before you call for service.
FAQs
Q: Why does my washer make loud banging noises while it is filling with water?
A: This is actually a problem with the plumbing in your home. When the water
valve in the washer shuts off, it can cause pipes in your home to move,
resulting in a loud banging noise. This effect, called water hammer, can be
reduced by installing an item called a water hammer arrestor. Add-on arrestors
can be purchased through your local hardware or home improvement store.
Q: Why is there so little water in my washer? How can it clean the clothes?
A: HE (High-Efficiency) washers are designed to properly wash your laundry
while using a minimum amount of water and energy. Because the water volume is
low, the small amount of detergent used is more concentrated in the water,
resulting in excellent cleaning performance.
Q: When I press a button, why does my washer beep and then nothing happens?
A: The Control Lock feature is turned on. To turn it off, press the Options
button, turn the knob to
select Control Lock, and press the 8(OK) button. Select Off and press the
8(OK) button.
Q: Where should I pour powdered laundry products when doing my laundry?
A: If you are using powdered laundry detergent, load it in the detergent
dispenser after removing the liquid detergent insert (where applicable).
Powdered laundry agents or powdered color safe bleach should be put directly
into the drum. These products can be put in the empty drum before loading or
on top of the laundry after loading the washer.
Error Messages
Problem Door open
Door unlocked
Water supply
Possible Cause & Solution
The door is opened. · Open and close the door again. If the message keeps
appearing, unplug the power cord
and call for service.
The door is not secured. · Check for objects around the door and door seal. If
the message keeps appearing, unplug
the power cord and call for service.
Water supply faucets are not fully open. · Make sure that the water faucets
are fully open.
Water inlet hoses are kinked, pinched, or crushed. · Make sure that the hoses
are not kinked, pinched or crushed behind or under the washer.
Be careful when moving the washer during cleaning or maintenance.
Water inlet filters are clogged. · Clean the inlet filters. See MAINTENANCE.
en-us_main.book.book Page 31 Wednesday, November 16, 2022 4:12 PM
ENGLISH
TROUBLESHOOTING 31
Problem Water supply
Drainage
Unbalance
No water detected Motor error Water too high Freeze error No temp detected
Vibration sensor Steam error Power failure Oversudsing
Possible Cause & Solution
Water supply pressure to faucet or house is too low. · Check another faucet in
the house to make sure that household water pressure is
adequate and flow is not restricted. · Disconnect the water inlet hoses from
the washer and run a few gallons of water through
the hoses to flush out any dirt. · If flow is too low, contact a plumber to
have the water supply lines repaired.
Water supply connected with leak-limiting hoses. · The use of hoses designed
to limit leaks is not recommended. Leak limiting hoses can trip
falsely and prevent the washer from filling.
Drain hose is kinked, pinched, or clogged. · Make sure that the drain hose is
free of clogs or kinks and is not pinched behind or under
the washer.
The end of the drain hose is more than 96 inches (2.4 m) above the bottom of
the washer. · Move the end of the drain hose so that it is lower than 96
inches (2.4 m). For best
performance, the end of the drain hose should be no higher than 66 inches (168
cm).
The load is too small. · Add additional items to allow the washer to balance
the load.
Heavy articles are mixed with lighter items. · Always try to wash articles of
somewhat similar weight to allow the washer to evenly
distribute the weight of the load for spinning.
The load is out of balance. · Manually redistribute the load if articles have
become tangled, preventing the automatic
rebalancing from working properly.
The water level sensor is not working correctly. · Close the water faucets,
unplug the washer, and call for service.
A motor error has occurred. · Allow the washer to stand for 30 minutes and
then restart the cycle. · If the error code is still displayed, call for
service.
Water level is too high due to a faulty water valve. · Close the water
faucets, unplug the washer, and call for service.
Inlet hose, drain hose or drain pump is frozen. · See Care in Cold Climates.
Control error. · Unplug the washer and wait 60 minutes. Reconnect power and
try again. · If the error code is still displayed, call for service.
Vibration sensor is malfunctioning. · Call for service.
The steam function did not work properly. · Call for service.
There was a power interruption or the power cord was not properly plugged in.
· Plug in the power cord or press the Start/Pause button to restart the cycle.
Too much detergent was used. · Do not add more than the recommended amount of
detergent.
en-us_main.book.book Page 32 Wednesday, November 16, 2022 4:12 PM
32 TROUBLESHOOTING
Problem
Possible Cause & Solution
Oversudsing
Too much sudsing detected. · The washer will operate the suds reduction cycle for about 2 hours.
Voltage abnormality Abnormal voltage detected. · Unplug the power plug. If error recurs, call for service.
Wi-Fi
Problem
Trouble connecting appliance and smartphone to Wi-Fi network
Possible Cause & Solution
The password for the Wi-Fi network was entered incorrectly.
· Delete your home Wi-Fi network and begin the connection process again.
Mobile data for your smartphone is turned on.
· Turn off the Mobile data on your smartphone before connecting the appliance.
The wireless network name (SSID) is set incorrectly.
· The wireless network name (SSID) should be a combination of English letters
and numbers. (Do not use special characters.)
The router frequency is not 2.4 GHz.
· Only a 2.4 GHz router frequency is supported. Set the wireless router to 2.4
GHz and connect the appliance to the wireless router. To check the router
frequency, check with your Internet service provider or the router
manufacturer.
The appliance and the router are too far apart.
· If the appliance is too far from the router, the signal may be weak and the
connection may not be configured correctly. Move the router closer to the
appliance or purchase and install a Wi-Fi repeater.
LG ThinQ is asking for a password to connect to the product.
· If you are asked to provide a password to connect to the product (not to
your home network) during the Wi-Fi setup, enter the last 4 characters of the
network name, repeated twice, with no spaces. For example, if the network name
appears as LG_XXXX_8b92, then you would enter 8b928b92 as your password. The
password is case sensitive and the last 4 characters are unique to your
appliance.
en-us_main.book.book Page 33 Wednesday, November 16, 2022 4:12 PM
ENGLISH
LIMITED WARRANTY
LIMITED WARRANTY 33
USA
TERMS AND CONDITIONS
ARBITRATION NOTICE: THIS LIMITED WARRANTY CONTAINS AN ARBITRATION PROVISION
THAT REQUIRES YOU AND LG ELECTRONICS (“LG”) TO RESOLVE DISPUTES BY BINDING
ARBITRATION INSTEAD OF IN COURT, UNLESS YOU CHOOSE TO OPT OUT. IN ARBITRATION,
CLASS ACTIONS AND JURY TRIALS ARE NOT PERMITTED. PLEASE SEE THE SECTION TITLED
“PROCEDURE FOR RESOLVING DISPUTES” BELOW.
Should your LG Washer (“Product”) fail due to a defect in materials or
workmanship under normal and proper use, during the warranty period set forth
below, LG will, at its option, repair or replace the Product. This limited
warranty is valid only to the original retail purchaser of the Product (“You”)
and applies only when purchased lawfully and used within the United States
including U.S. Territories.
WARRANTY PERIOD
Washer
Direct Drive Motor (Stator or Rotor)
Stainless Steel Drum
Parts (internal/ functional parts only) and Labor: One (1) year from the date of original retail purchase
Parts Only: Ten (10) years from the date of original retail purchase You are responsible for any applicable labor cost.
Parts Only: Three (3) years from the date of original retail purchase You are responsible for any applicable labor cost.
· Replacement Products and parts are warranted for the remaining portion of
the original warranty period or ninety (90) days, whichever is greater.
· Replacement Products and parts may be new, reconditioned, refurbished, or
otherwise factory remanufactured.
· Replaced Product or part(s) will be the property of LG.
· Proof of original retail purchase specifying the Product model and date of
purchase is required to obtain warranty service under this limited warranty.
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THE PRODUCT IS LIMITED
IN DURATION TO THE DURATION OF THE ABOVE LIMITED WARRANTY. UNDER NO
CIRCUMSTANCES SHALL LG OR ITS U.S. DISTRIBUTORS/DEALERS BE LIABLE FOR ANY
INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL, OR PUNITIVE DAMAGES, INCLUDING,
WITHOUT LIMITATION, LOST GOODWILL, LOST REVENUES OR PROFITS, WORK STOPPAGE,
IMPAIRMENT OF OTHER GOODS, COST OF REMOVAL AND REINSTALLATION OF THE PRODUCT,
LOSS OF USE, OR ANY OTHER DAMAGES WHETHER BASED IN CONTRACT, TORT, OR
OTHERWISE. LG’S TOTAL LIABILITY, IF ANY, SHALL NOT EXCEED THE PURCHASE PRICE
PAID BY YOU FOR THE PRODUCT.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO
THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS LIMITED
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE.
THIS LIMITED WARRANTY DOES NOT COVER:
· Service trips to deliver, pick up, or install, educate how to operate,
correct wiring, or correct unauthorized repairs.
· Damage or failure of the Product to perform during power failures and
interrupted or inadequate electrical service.
· Damage or failure of the Product caused by leaky or broken water pipes,
frozen water pipes, restricted drain lines, inadequate or interrupted water
supply or inadequate supply of air.
en-us_main.book.book Page 34 Wednesday, November 16, 2022 4:12 PM
34 LIMITED WARRANTY
· Damage or failure of the Product resulting from operating the Product in a
corrosive atmosphere or contrary to the Product owner’s manual.
· Damage or failure of the Product caused by accidents, pests and vermin,
lightning, wind, fire, floods, acts of nature, or any other causes beyond the
control of LG.
· Damage or failure of the Product caused by unauthorized modification or
alteration, or if the Product is used for other than the intended purpose, or
any water leakage where the Product was not properly installed.
· Damage or failure of the Product caused by incorrect electrical current,
voltage, or plumbing codes. · Damage or failure of the Product caused by
transportation, storage, and/or handling, including
scratches, dents, chips, and/or other damage to the finish of the Product,
unless such damage is reported within one (1) week of delivery. · Damage or
failure of the Product resulting from misuse, abuse, improper installation,
repair, or maintenance. Improper repair includes the use of parts not
authorized by LG. Improper installation or maintenance includes installation
or maintenance contrary to the Product owner’s manual. · Damage or failure of
the Product caused by the use of parts, components, accessories, consumable
cleaning products, or any other products or services that were not authorized
by LG. · Damage or missing items to any display or open box Product. ·
Refurbished Product or any Product sold “As Is”, “Where Is”, “With all
Faults”, or similar disclaimer. · Products with original serial numbers that
have been removed, altered, or cannot be readily determined. · Increases in
utility costs and additional utility expenses. · Any noises associated with
normal operation. · Products used for other than normal and proper household
use (e.g., commercial or industrial use) or contrary to the Product owner’s
manual. · Costs associated with removal and reinstallation of the Product for
repairs, or the removal and reinstallation of the Product if it is installed
in an inaccessible location or not installed in accordance with the Product
Owner’s manual. · Accessories, removable components, or consumable parts (e.g.
Shelves, door bins, drawers, water/air filters, racks, light bulbs, batteries,
etc., as applicable), except for internal/functional parts covered under this
limited warranty. The cost of repair or replacement under these excluded
circumstances shall be borne by You.
TO OBTAIN WARRANTY SERVICE AND ADDITIONAL INFORMATION Call
1-800-243-0000 and select the
appropriate option from the menu. Or visit our website at http://www.lg.com Or
by mail: LG Electronics Customer Service P.O. Box 240007 Huntsville, AL 35813
ATTN: CIC
PROCEDURE FOR RESOLVING DISPUTES:
ALL DISPUTES BETWEEN YOU AND LG ARISING OUT OF OR RELATING IN ANY WAY TO THIS
LIMITED WARRANTY OR THE PRODUCT SHALL BE RESOLVED EXCLUSIVELY THROUGH BINDING
ARBITRATION, AND NOT IN A COURT OF GENERAL JURISDICTION. BINDING ARBITRATION
MEANS THAT YOU AND LG ARE EACH WAIVING THE RIGHT TO A JURY TRIAL AND TO BRING
OR PARTICIPATE IN A CLASS ACTION. Definitions. For the purposes of this
section, references to “LG” mean LG Electronics U.S.A., Inc., its parents,
subsidiaries and affiliates, and each of their officers, directors, employees,
agents, beneficiaries, predecessors in interest, successors, assigns and
suppliers; references to “dispute” or “claim” shall include any dispute, claim
or controversy of any kind whatsoever (whether based in contract, tort,
statute, regulation, ordinance, fraud, misrepresentation or any other legal or
equitable theory) arising out of or relating in any way to the sale, condition
or performance of the product or this Limited Warranty.
Notice of Dispute. In the event you intend to commence an arbitration
proceeding, you must first notify LG in writing at least 30 days in advance of
initiating the arbitration by sending a letter to LG at LG Electronics, USA,
Inc. Attn: Legal Department-Arbitration 111 Sylvan Avenue, Englewood Cliffs,
NJ 07632. You and LG agree to engage in good faith discussions in an attempt
to amicably resolve your claim. The
ENGLISH
en-us_main.book.book Page 35 Wednesday, November 16, 2022 4:12 PM
LIMITED WARRANTY 35
notice must provide your name, address, and telephone number; identify the
product that is the subject of the claim; and describe the nature of the claim
and the relief being sought. If you and LG are unable to resolve the dispute
within 30 days, either party may proceed to file a claim for arbitration.
Agreement to Binding Arbitration and Class Action Waiver. Upon failure to
resolve the dispute during the 30 day period after sending written notice to
LG, you and LG agree to resolve any claims between us only by binding
arbitration on an individual basis, unless you opt out as provided below. Any
dispute between you and LG shall not be combined or consolidated with a
dispute involving any other person’s or entity’s product or claim. More
specifically, without limitation of the foregoing, any dispute between you and
LG shall not under any circumstances proceed as part of a class or
representative action. Instead of arbitration, either party may bring an
individual action in small claims court, but that small claims court action
may not be brought on a class or representative basis.
Arbitration Rules and Procedures. To begin arbitration of a claim, either you
or LG must make a written demand for arbitration. The arbitration will be
administered by the American Arbitration Association (“AAA”) and will be
conducted before a single arbitrator under the AAA’s Consumer Arbitration
Rules that are in effect at the time the arbitration is initiated (referred to
as the “AAA Rules”) and under the procedures set forth in this section. The
AAA Rules are available online at www.adr.org/consumer. Send a copy of your
written demand for arbitration, as well as a copy of this provision, to the
AAA in the manner described in the AAA Rules. You must also send a copy of
your written demand to LG at LG Electronics, USA, Inc. Attn: Legal Department-
Arbitration 111 Sylvan Avenue, Englewood Cliffs, NJ 07632. If there is a
conflict between the AAA Rules and the rules set forth in this section, the
rules set forth in this section will govern. This arbitration provision is
governed by the Federal Arbitration Act. Judgment may be entered on the
arbitrator’s award in any court of competent jurisdiction. All issues are for
the arbitrator to decide, except that issues relating to the scope and
enforceability of the arbitration provision and to the arbitrability of the
dispute are for the court to decide. The arbitrator is bound by the terms of
this provision.
Governing Law. The law of the state of your residence shall govern this
Limited Warranty and any disputes between us except to the extent that such
law is preempted by or inconsistent with applicable federal law.
Fees/Costs. You do not need to pay any fee to begin an arbitration. Upon
receipt of your written demand for arbitration, LG will promptly pay all
arbitration filing fees to the AAA unless you seek more than $25,000 in
damages, in which case the payment of these fees will be governed by the AAA
Rules. Except as otherwise provided for herein, LG will pay all AAA filing,
administration and arbitrator fees for any arbitration initiated in accordance
with the AAA Rules and this arbitration provision. If you prevail in the
arbitration, LG will pay your attorneys’ fees and expenses as long as they are
reasonable, by considering factors including, but not limited to, the purchase
amount and claim amount. Notwithstanding the foregoing, if applicable law
allows for an award of reasonable attorneys’ fees and expenses, an arbitrator
can award them to the same extent that a court would. If the arbitrator finds
either the substance of your claim or the relief sought in the demand is
frivolous or brought for an improper purpose (as measured by the standards set
forth in Federal Rule of Civil Procedure 11(b)), then the payment of all
arbitration fees will be governed by the AAA Rules. In such a situation, you
agree to reimburse LG for all monies previously disbursed by it that are
otherwise your obligation to pay under the AAA Rules. Except as otherwise
provided for, LG waives any rights it may have to seek attorneys’ fees and
expenses from you if LG prevails in the arbitration.
Hearings and Location. If your claim is for $25,000 or less, you may choose to
have the arbitration conducted solely on the basis of (1) documents submitted
to the arbitrator, (2) through a telephonic hearing, or (3) by an in-person
hearing as established by the AAA Rules. If your claim exceeds $25,000, the
right to a hearing will be determined by the AAA Rules. Any in-person
arbitration hearings will be held at a location within the federal judicial
district in which you reside unless we both agree to another location or we
agree to a telephonic arbitration.
Opt Out. You may opt out of this dispute resolution procedure. If you opt out,
neither you nor LG can require the other to participate in an arbitration
proceeding. To opt out, you must send notice to LG no later than 30 calendar
days from the date of the first consumer purchaser’s purchase of the product
by either: (i) sending an e-mail to optout@lge.com, with the subject line:
“Arbitration Opt Out” or (ii) calling 1800-980-2973. You must include in the
opt out e-mail or provide by telephone: (a) your name and address; (b) the
date on which the product was purchased; (c) the product model name or model
number; and (d) the serial number (the serial number can be found (i) on the
product; or (ii) online by accessing https://
en-us_main.book.book Page 36 Wednesday, November 16, 2022 4:12 PM
36 LIMITED WARRANTY
www.lg.com/us/support/repair-service/schedule-repair-continued and clicking on
“Find My Model & Serial Number”). You may only opt out of the dispute
resolution procedure in the manner described above (that is, by e-mail or
telephone); no other form of notice will be effective to opt out of this
dispute resolution procedure. Opting out of this dispute resolution procedure
will not affect the coverage of the Limited Warranty in any way, and you will
continue to enjoy the full benefits of the Limited Warranty. If you keep this
product and do not opt out, then you accept all terms and conditions of the
arbitration provision described above.
en-us_main.book.book Page 37 Wednesday, November 16, 2022 4:12 PM
ENGLISH
LIMITED WARRANTY 37
CANADA
TERMS AND CONDITIONS
ARBITRATION NOTICE: THIS LIMITED WARRANTY CONTAINS AN ARBITRATION PROVISION
THAT REQUIRES YOU AND LG TO RESOLVE DISPUTES BY BINDING ARBITRATION INSTEAD OF
IN COURT, UNLESS THE LAWS OF YOUR PROVINCE OR TERRITORY DO NOT PERMIT THAT,
OR, IN OTHER JURISDICTIONS, IF YOU CHOOSE TO OPT OUT. IN ARBITRATION, CLASS
ACTIONS AND JURY TRIALS ARE NOT PERMITTED. PLEASE SEE THE SECTION TITLED
“PROCEDURE FOR RESOLVING DISPUTES” BELOW.
Should your LG Washer (“Product”) fail due to a defect in materials or
workmanship under normal and proper use, during the warranty period set forth
below, LG Electronics Canada, Inc. (“LGECI”) will, at its option, repair,
replace or pro rate the Product upon receipt of proof of the original retail
purchase. This limited warranty is valid only to the original retail purchaser
of the Product and applies only to a Product distributed, purchased from an
authorized retailer and used within Canada, as determined at the sole
discretion of LGECI.
WARRANTY PERIOD (Note: If the original date of purchase cannot be verified, the warranty will begin sixty (60) days from the date of manufacture)
Washer
Stainless Steel Drum
Direct Drive Motor (Stator or Rotor)
One (1) year from the date of original retail purchase
Three (3) years from the date of original retail purchase
Ten (10) years from the date of original retail purchase
Parts and Labor (internal/ functional parts only)
Parts only (Consumer will be charged for labor)
Part only (Consumer will be charged for labor)
· Replacement products and parts are warranted for the remaining portion of
the original warranty period or ninety (90) days, whichever is greater.
· Replacement products and parts may be new, reconditioned, refurbished, or
otherwise factory remanufactured, all at the sole discretion of LGECI.
· Proof of original retail purchase specifying the Product model and date of
purchase is required to obtain warranty service under this Limited Warranty.
LGECI’S SOLE LIABILITY IS LIMITED TO THE LIMITED WARRANTY SET OUT ABOVE.
EXCEPT AS EXPRESSLY PROVIDED ABOVE, LGECI MAKES NO, AND HEREBY DISCLAIMS, ALL
OTHER WARRANTIES AND CONDITIONS RESPECTING THE PRODUCT, WHETHER EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND NO REPRESENTATIONS
SHALL BE BINDING ON LGECI. LGECI DOES NOT AUTHORIZE ANY PERSON TO CREATE OR
ASSUME FOR IT ANY OTHER WARRANTY OBLIGATION OR LIABILITY IN CONNECTION WITH
THE PRODUCT. TO THE EXTENT THAT ANY WARRANTY OR CONDITION IS IMPLIED BY LAW,
IT IS LIMITED TO THE WARRANTY PERIOD SET OUT ABOVE. UNDER NO CIRCUMSTANCES
SHALL LGECI, THE MANUFACTURER OR DISTRIBUTOR OF THE PRODUCT, BE LIABLE FOR ANY
INCIDENTAL, CONSEQUENTIAL, SPECIAL, DIRECT, INDIRECT, PUNITIVE OR EXEMPLARY
DAMAGES, INCLUDING, WITHOUT LIMITATION, LOSS OF GOODWILL, LOST PROFITS, LOSS
OF ANTICIPATED PROFITS, LOST REVENUE, LOSS OF USE, OR ANY OTHER DAMAGE,
WHETHER ARISING DIRECTLY OR INDIRECTLY FROM ANY CONTRACTUAL BREACH,
FUNDAMENTAL BREACH, TORT OR OTHERWISE, OR FROM ANY ACTS OR OMISSIONS. LGECI’S
TOTAL LIABILITY, IF ANY, SHALL NOT EXCEED THE PURCHASE PRICE PAID BY YOU FOR
THE PRODUCT.
This Limited Warranty gives you specific legal rights. You may also have other
rights that vary from province to province depending on applicable provincial
laws. Any term of this Limited Warranty that negates or varies any implied
condition or warranty under provincial law is severable where it conflicts
with such provincial law without affecting the remainder of this warranty’s
terms.
en-us_main.book.book Page 38 Wednesday, November 16, 2022 4:12 PM
38 LIMITED WARRANTY
THIS LIMITED WARRANTY DOES NOT COVER:
· Service trips to i) deliver, pick up, or install or; educate on how to
operate the Product; ii) correct wiring or plumbing; or iii) correct
unauthorized repairs or installations of the Product;
· Damage or failure of the Product to perform during power failures and
interrupted or inadequate electrical service;
· Damage or failure caused by leaky or broken water pipes, frozen water pipes,
restricted drain lines, inadequate or interrupted water supply or inadequate
supply of air;
· Damage or failure resulting from operating the Product in a corrosive
atmosphere or contrary to the instructions outlined in the Product’s owner’s
manual;
· Damage or failure to the Product caused by accidents, pests and vermin,
lightning, wind, fire, floods, acts of God, or any other causes beyond the
control of LGECI or the manufacturer;
· Damage or failure resulting from misuse, abuse, improper installation,
repair, or maintenance of the Product. Improper repair includes use of parts
not authorized or specified by LGECI. Improper installation or maintenance
includes installation or maintenance contrary to the Product’s owner’s manual;
· Damage or failure caused by unauthorized modification or alteration of the
Product, or if used for other than the intended household purpose/use of the
Product, or damage or failure resulting from any water leakage due to improper
installation of the Product;
· Damage or failure caused by incorrect electrical current, voltage or
plumbing codes;
· Damage or failure caused by use that is other than normal household use,
including, without limitation, commercial or industrial use, including use in
commercial offices or recreational facilities, or as otherwise outlined in the
Product’s owner’s manual;
· Damage or failure caused by the use of any accessories, components or
cleaning products, including, without limitation, that are not
approved/authorized by LGECI;
· Damage or failure caused by transportation and handling, including
scratches, dents, chips and/or other damage to the finish of the Product,
unless such damage results from defects in materials or workmanship and is
reported to LGECI within one (1) week of delivery of the Products;
· Damage or missing items to any display, open box, refurbished or discounted
Product;
· Refurbished Product or any Product sold “As Is”, “Where Is”, “With all
Faults”, or any similar disclaimer;
· Products with original serial numbers that have been removed, altered or
cannot be readily determined at the discretion of LGECI;
· Increases in utility costs and additional utility expenses in any way
associated with the Product;
· Replacement of light bulbs, filters, fuses or any other consumable parts;
· Costs associated with removal and/or reinstallation of the Product for
repairs;
· Noises associated with normal operation and failure to follow instructions
found in the use and care and installation guides or operating the unit in an
unsuitable environment will not be covered under this warranty.
· Coverage for “in Home” repairs, for products in-warranty, will be provided
if the Product is within a 150 km radius from the nearest authorized service
center (ASC), as determined by LG Canada. If your Product is located outside a
150 km radius from a ASC, as determined by LG Canada, it will be your
responsibility to bring the Product, at your sole expense, to the ASC for in-
warranty repair.
All costs and expenses associated with the above excluded circumstances,
listed under the heading, This Limited Warranty Does Not Cover, shall be borne
by the consumer.
TO OBTAIN WARRANTY SERVICE AND ADDITIONAL INFORMATION, PLEASE CALL OR VISIT
OUR WEBSITE:
Call 1-888-542-2623 and select the
appropriate option from the menu, or visit our website at http:// www.lg.com
ENGLISH
en-us_main.book.book Page 39 Wednesday, November 16, 2022 4:12 PM
LIMITED WARRANTY 39
PROCEDURE FOR RESOLVING DISPUTES:
EXCEPT WHERE PROHIBITED AT LAW, ALL DISPUTES BETWEEN YOU AND LG ARISING OUT OF
OR RELATING IN ANY WAY TO THIS LIMITED WARRANTY OR THE PRODUCT SHALL BE
RESOLVED EXCLUSIVELY THROUGH BINDING ARBITRATION, AND NOT IN A COURT OF
GENERAL JURISDICTION. EXCEPT WHERE PROHIBITED AT LAW, YOU AND LG BOTH
IRREVOCABLY AGREE TO WAIVE THE RIGHT TO A JURY TRIAL AND TO BRING OR
PARTICIPATE IN A CLASS ACTION.
Definitions. For the purposes of this section, references to “LG” mean LG
Electronics Canada, Inc., its parents, subsidiaries and affiliates, and each
of their officers, directors, employees, agents, beneficiaries, predecessors
in interest, successors, assigns and suppliers; references to “dispute” or
“claim” shall include any dispute, claim or controversy of any kind whatsoever
(whether based in contract, tort, statute, regulation, ordinance, fraud,
misrepresentation or any other legal or equitable theory) arising out of or
relating in any way to the sale, condition or performance of the product or
this Limited Warranty.
Notice of Dispute. In the event you intend to commence an arbitration
proceeding, you must first notify LG in writing at least 30 days in advance of
initiating the arbitration by sending a letter to LGECI Legal Team at 20
Norelco Drive, North York, Ontario, Canada M9L 2X6 (the “Notice of Dispute”).
You and LG agree to engage in good faith discussions in an attempt to amicably
resolve your claim. The notice must provide your name, address, and telephone
number; identify the product that is the subject of the claim; and describe
the nature of the claim and the relief being sought. If you and LG are unable
to resolve the dispute within 30 days of LG’s receipt of the Notice of
Dispute, the dispute shall be resolved by binding arbitration in accordance
with the procedure set out herein. You and LG both agree that, during the
arbitration proceeding, the terms (including any amount) of any settlement
offer made by either you or LG will not be disclosed to the arbitrator until
the arbitrator determines the dispute.
Agreement to Binding Arbitration and Class Action Waiver. Upon failure to
resolve the dispute during the 30 day period after LG’s receipt of the Notice
of Dispute, you and LG agree to resolve any claims between you and LG only by
binding arbitration on an individual basis, unless you opt out as provided
below, or you reside in a jurisdiction that prevents full application of this
clause in the circumstances of the claims at issue (in which case if you are a
consumer, this clause will only apply if you expressly agree to the
arbitration). To the extent permitted by applicable law, any dispute between
you and LG shall not be combined or consolidated with a dispute involving any
other person’s or entity’s product or claim. More specifically, without
limitation of the foregoing, except to the extent such a prohibition is not
permitted at law, any dispute between you and LG shall not under any
circumstances proceed as part of a class or representative action. Instead of
arbitration, either party may bring an individual action in small claims
court, but that small claims court action may not be brought on a class or
representative basis except to the extent this prohibition is not permitted at
law in your province or territory of jurisdiction as it relates to the claims
at issue between you and LG.
Arbitration Rules and Procedures. To begin arbitration of a claim, either you
or LG must make a written demand for arbitration. The arbitration will be
private and confidential, and conducted on a simplified and expedited basis
before a single arbitrator chosen by the parties under the provincial or
territorial commercial arbitration law and rules of the province or territory
of your residence. You must also send a copy of your written demand to LG at
LG Electronics, Canada, Inc., Attn: Legal Department- Arbitration, 20 Norelco
Drive, North York, Ontario M9L 2X6. This arbitration provision is governed by
your applicable provincial or territorial commercial arbitration legislation.
Judgment may be entered on the arbitrator’s award in any court of competent
jurisdiction. All issues are for the arbitrator to decide, except that, issues
relating to the scope and enforceability of the arbitration provision and to
the arbitrability of the dispute are for the court to decide. The arbitrator
is bound by the terms of this provision.
Governing Law. The law of the province or territory of your purchase shall
govern this Limited Warranty and any disputes between you and LG except to the
extent that such law is preempted by or inconsistent with applicable federal
or provincial/territorial law. Should arbitration not be permitted for any
claim, action, dispute or controversy between you and LG, you and LG attorn to
the exclusive jurisdiction of the courts of the province or territory of your
purchase for the resolution of the claim, action, dispute or controversy
between you and LG.
Fees/Costs. You do not need to pay any fee to begin an arbitration. Upon
receipt of your written demand for arbitration, LG will promptly pay all
arbitration filing fees unless you seek more than $25,000 in damages, in which
case the payment of these fees will be governed by the applicable arbitration
rules. Except as otherwise provided for herein, LG will pay all filing,
administration and arbitrator fees for any arbitration initiated in accordance
with the applicable arbitration rules and this arbitration provision. If you
prevail in the arbitration, LG will pay your attorneys’ fees and expenses as
long as they are reasonable, by
en-us_main.book.book Page 40 Wednesday, November 16, 2022 4:12 PM
40 LIMITED WARRANTY
considering factors including, but not limited to, the purchase amount and
claim amount. Notwithstanding the foregoing, if applicable law allows for an
award of reasonable attorneys’ fees and expenses, an arbitrator can award them
to the same extent that a court would. If the arbitrator finds either the
substance of your claim or the relief sought in the demand is frivolous or
brought for an improper purpose (as measured by the applicable laws), then the
payment of all arbitration fees will be governed by the applicable arbitration
rules. In such a situation, you agree to reimburse LG for all monies
previously disbursed by it that are otherwise your obligation to pay under the
applicable arbitration rules. Except as otherwise provided for, LG waives any
rights it may have to seek attorneys’ fees and expenses from you if LG
prevails in the arbitration.
Hearings and Location. If your claim is for $25,000 or less, you may choose to
have the arbitration conducted solely (1) on the basis of documents submitted
to the arbitrator, (2) through a telephonic hearing, or (3) by an in-person
hearing as established by the applicable arbitration rules. If your claim
exceeds $25,000, the right to a hearing will be determined by the applicable
arbitration rules. Any inperson arbitration hearings will be held at the
nearest, most mutually-convenient arbitration location available within the
province or territory in which you reside unless you and LG both agree to
another location or agree to a telephonic arbitration.
Severability and Waiver. If any portion of this Limited Warranty (including
these arbitration procedures) is unenforceable, the remaining provisions will
continue in full force and effect to the maximum extent permitted by
applicable law. Should LG fail to enforce strict performance of any provision
of this Limited Warranty (including these arbitration procedures), it does not
mean that LG intends to waive or has waived any provision or part of this
Limited Warranty.
Opt Out.You may opt out of this dispute resolution procedure. If you opt out,
neither you nor LG can require the other to participate in an arbitration
proceeding. To opt out, you must send notice to LG no later than 30 calendar
days from the date of the first consumer purchaser’s purchase of the product
by either (i) sending an e-mail to optout@lge.com, with the subject line:
“Arbitration Opt Out;” or (ii) calling 1800-980-2973. You must include in the
opt out e-mail or provide by telephone: (a) your name and address; (b) the
date on which the product was purchased; (c) the product model name or model
number; and (d) the serial number (the serial number can be found (i) on the
product; or (ii) online by accessing https:// www.lg.com/ca_en/support/repair-
service/schedule- repair and clicking on “Find My Model & Serial Number”).
In the event that you “Opt Out”, the law of the province or territory of your
residence shall govern this Limited Warranty and any disputes between you and
LG except to the extent that such law is preempted by or inconsistent with
applicable federal or provincial/territorial law. Should arbitration not be
permitted for any claim, action, dispute or controversy between you and LG,
you and LG agree to attorn to the exclusive jurisdiction of the courts of the
province or territory of your residence for the resolution of the claim,
action, dispute or controversy between you and LG.
You may only opt out of the dispute resolution procedure in the manner
described above (that is, by e-mail or telephone); no other form of notice
will be effective to opt out of this dispute resolution procedure. Opting out
of this dispute resolution procedure will not affect the coverage of the
Limited Warranty in any way, and you will continue to enjoy the full benefits
of the Limited Warranty. If you keep this product and do not opt out, then you
accept all terms and conditions of the arbitration provision described above.
Conflict of Terms. In the event of a conflict or inconsistency between the
terms of this Limited Warranty and the End User License Agreement (“EULA”) in
regards to dispute resolution, the terms of this Limited Warranty shall
control and govern the rights and obligations of the parties and shall take
precedence over the EULA.
es-us_main.book.book Page 1 Wednesday, November 16, 2022 4:11 PM
Escanee el código QR para ver el manual.
MANUAL DEL PROPIETARIO
LAVADORA
Lea el manual del propietario detenidamente previo a operar el
electrodoméstico y mantengalo al alcance para futuras referencias. Este manual
del propietario abreviado aborda la seguridad del usuario, las precauciones y
la información de instalación.
Para ver el manual del propietario completo, puede
1. Manual en línea: visite el sitio web de LG en: http://gscs-manual.lge.
com/Total/HQ/GatewayPage/main.html o escanee el código QR que se encuentra en
la parte superior; o 2. Manual en PDF imprimible: Visite lg.com y busque su
número de modelo; o 3. Llame o escriba al servicio de atención al cliente
según lo dispuesto en su Garantía limitada.
ESPAÑOL WM5500HA / WM6500HA
www.lg.com
Copyright © 2022 LG Electronics Inc. Todos los derechos reservados
es-us_main.book.book Page 2 Wednesday, November 16, 2022 4:11 PM
2
ÍNDICE
3 INSTRUCCIONES IMPORTANTES DE SEGURIDAD
3 LEA TODAS LAS INSTRUCCIONES ANTES DE UTILIZAR
3 MENSAJES DE ADVERTENCIA 7 MENSAJES DE PRECAUCIÓN
8 DESCRIPCIÓN GENERAL DEL PRODUCTO
8 Características del producto
10 INSTALACIÓN
10 Antes de la instalación 11 Elección de la ubicación adecuada 12 Desempaque
y retiro del material de
transporte 13 Conexión de las mangueras de entrada de
agua 14 Conexión de la manguera de desagüe 16 Nivelación de la lavadora 17
Revisión final de la instalación
19 FUNCIONAMIENTO
19 Antes de utilizarlo 20 Carga de la lavadora
22 FUNCIONES INTELIGENTES
22 Uso de la aplicación LG ThinQ 25 Función Smart DiagnosisTM (Diagnóstico
Inteligente)
27 MANTENIMIENTO
27 Limpieza regular 27 Mantenimiento periódico 31 Cuidado en climas fríos
33 SOLUCIÓN DE PROBLEMAS
33 Antes de llamar al servicio técnico
36 GARANTÍA LIMITADA
36 EE. UU.
ESPAÑOL
es-us_main.book.book Page 3 Wednesday, November 16, 2022 4:11 PM
INSTRUCCIONES IMPORTANTES DE SEGURIDAD 3
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
LEA TODAS LAS INSTRUCCIONES ANTES DE UTILIZAR
Mensajes de seguridad
Su seguridad y la de los demás son muy importantes. Tanto en este manual como
en el equipo, hemos proporcionado muchos mensajes de seguridad importantes.
Siempre debe leer y respetar todos los mensajes de seguridad.
Este es el símbolo de alerta de seguridad. Este símbolo le advierte sobre
posibles riesgos que pueden ocasionar lesiones o la muerte a usted o a otros.
El símbolo de alerta de seguridad siempre estará acompañado de las palabras
“ADVERTENCIA” o “PRECAUCIÓN” y seguido de un mensaje de seguridad importante.
Estos términos significan lo siguiente:
ADVERTENCIA
El incumplimiento de las instrucciones podría causarle la muerte o lesiones
graves.
PRECAUCIÓN
El incumplimiento de las instrucciones podría causarle lesiones o daños al
producto. Todos los mensajes de seguridad le indicarán cuáles son los peligros
potenciales, cómo reducir la posibilidad de lesiones y qué podría suceder si
no sigue las instrucciones.
MENSAJES DE ADVERTENCIA
ADVERTENCIA
· Para disminuir el riesgo de explosiones, incendios, descargas eléctricas,
quemaduras, lesiones o muerte para las personas que usen este artefacto, siga
las precauciones básicas, incluidas las siguientes:
Instalación
· Cumpla con todos los procedimientos de seguridad del sector recomendados,
incluido el uso de guantes de manga larga y gafas de seguridad.
· Nunca intente operar este artefacto si se encuentra dañado, si no funciona
correctamente, si no está ensamblado por completo o si tiene piezas faltantes
o rotas, incluido un cable o enchufe dañado.
· Antes de ser utilizado, este artefacto debe ser correctamente instalado,
conforme a lo descrito en este manual.
· Para reducir el riesgo de lesiones graves o muerte, siga todas las
instrucciones de instalación. · Consulte las INSTRUCCIONES DE INSTALACIÓN para
obtener información detallada sobre los
procedimientos de conexión a tierra. Las instrucciones de instalación se
suministran junto con el artefacto para ser consultadas por el instalador. Si
el artefacto se traslada a una nueva ubicación, asegúrese de que lo revise y
lo vuelva a instalar personal de servicio calificado. · El traslado o la
instalación del artefacto requieren de dos o más personas. · No instale el
artefacto en lugares húmedos. · Almacene e instale el artefacto donde no esté
expuesto a temperaturas bajo cero ni a la intemperie. · Este artefacto no ha
sido diseñado para ser usado en embarcaciones o instalaciones móviles, tales
como casas rodantes, remolques o aeronaves.
es-us_main.book.book Page 4 Wednesday, November 16, 2022 4:11 PM
4 INSTRUCCIONES IMPORTANTES DE SEGURIDAD
· Mantenga los materiales de empaque fuera del alcance de los niños. Los
materiales de empaque pueden ser peligrosos para los niños. Corren riesgo de
asfixia.
· Destruya el cartón, la bolsa de plástico y los demás materiales de empaque
luego de Desempaque el artefacto. Estos materiales podrían utilizarlos los
niños para jugar. Las cajas de cartón cubiertas con tapetes, colchas o láminas
plásticas pueden convertirse en cámaras herméticas.
· El artefacto debe ser instalado y conectado a tierra por personal de
servicio calificado, de acuerdo con los códigos locales.
· Cuando traslade o instale el aparato, tenga especial cuidado en no apretar,
aplastar o dañar el cable de alimentación.
· Debe conectarse a un circuito de alimentación de clasificación y tamaño
adecuados y debidamente protegido para evitar la sobrecarga eléctrica.
· Debe posicionar este artefacto cerca de una fuente de suministro eléctrico.
· Desconecte el cable de alimentación, el fusible del hogar o el interruptor
de corriente antes de instalar o
reparar el artefacto. · El cable de alimentación de este aparato está equipado
con un enchufe de 3 clavijas (conexión a tierra)
que se conecta con un tomacorriente estándar de 3 clavijas (tierra) para
minimizar la posibilidad de descarga eléctrica de este aparato. · Por ninguna
razón debe cortar o quitar la tercera clavija (tierra) del cable de
alimentación. · Use mangueras nuevas cuando conecte la lavadora al suministro
de agua. No reutilice mangueras viejas.
FUNCIONAMIENTO
· Lea todas las instrucciones antes de usar el artefacto y consérvelas. · Use
el artefacto únicamente para el fin previsto. · Si el producto ha estado
sumergido en el agua, en agua estancada o en un área anegada, no entre en
contacto con el producto y comuníquese de inmediato con un Centro de
Información al Cliente de LG Electronics para recibir instrucciones antes de
reanudar el uso. · Si detecta un sonido extraño, olor a quemado o a químico, o
humo provenientes del artefacto, desconéctelo de inmediato y comuníquese con
un Centro de Información al Cliente de LG Electronics. · Bajo ciertas
condiciones, podría producirse gas hidrógeno en un sistema de agua caliente
que no ha sido utilizado por dos semanas o más. EL GAS HIDRÓGENO ES EXPLOSIVO.
Si el sistema de agua caliente no se ha usado durante ese período de tiempo,
abra todas las llaves de agua caliente y deje que fluya varios minutos antes
de usar el artefacto. Esto eliminará el gas hidrógeno acumulado. Dado que el
gas hidrógeno es inflamable, no fume ni use ninguna llama abierta durante este
proceso. · No introduzca las manos en la lavadora si la cuba, el tambor, el
agitador o cualquier pieza interior del artefacto se encuentra en movimiento.
Antes de cargar, descargar o agregar artículos, presione Inicio/ Pausa y
espere que la cuba o el tambor se detengan por completo antes de introducir
las manos en el interior. · Este artefacto no ha sido diseñado para ser
utilizado por personas con capacidades físicas, sensoriales o mentales
disminuidas (incluidos niños) o que no cuenten con la experiencia o los
conocimientos necesarios para operarlo, salvo que una persona responsable de
su seguridad les brinde la supervisión o la instrucción pertinente en cuanto
al uso del artefacto. · No permita que niños o mascotas jueguen con el
electrodoméstico, sobre o dentro de éste. Es necesaria la supervisión cuando
el electrodoméstico es utilizado cerca de niños o mascotas. · Mantenga los
productos de lavandería lejos del alcance de los niños. Para evitar lesiones a
las personas, preste atención a todas las advertencias que figuran en las
etiquetas de los productos. · Repare o reemplace de inmediato todos los cables
de alimentación deshilachados o dañados de otra forma. No use un cable que
exhiba roturas o abrasión en su longitud o en sus extremos. · Nunca desconecte
el artefacto tirando del cable de alimentación. Sujete siempre con firmeza el
enchufe y tire derecho para extraerlo del tomacorriente. · No use un cable de
extensión ni un adaptador con este artefacto.
ESPAÑOL
es-us_main.book.book Page 5 Wednesday, November 16, 2022 4:11 PM
INSTRUCCIONES IMPORTANTES DE SEGURIDAD 5
· No sujete el cable de alimentación ni toque los controles del artefacto con
las manos húmedas. · No modifique ni extienda el cable de alimentación. · Si
se daña el cable de electricidad, solo el fabricante está autorizado para
reemplazarlo, o bien su agente
de servicio técnico o una persona de calificación similar para prevenir
riesgos. · No coloque prendas aceitosas o grasosas, candelas o materiales
inflamables encima del artefacto. · Mantenga el área debajo de los artefactos
y sus alrededores libre de materiales combustibles (pelusa,
papel, trapos, etc.), gasolina, productos químicos y otros vapores o líquidos
inflamables. · No almacene ni use gasolina u otros líquidos o vapores
inflamables cerca de este artefacto ni de ningún
otro. · No mezcle cloro con amoniaco o ácidos, como por ejemplo, vinagre. Siga
las instrucciones del envase
cuando utilice productos de lavandería. Su uso incorrecto puede producir gases
venenosos, los cuales pueden ocasionar lesiones graves o la muerte. · Nunca
utilice productos químicos agresivos, limpiadores abrasivos ni solventes para
limpiar la lavadora. Estos productos arruinarán el acabado. · No lave prendas
que hayan sido previamente limpiadas, lavadas o manchadas con gasolina,
solventes de limpieza en seco, aceite vegetal o de cocina u otras sustancias
inflamables o explosivas, ni prendas a las cuales se haya sumergido en estos
productos, ya que los mismos emiten vapores que pueden inflamarse o explotar.
· No agregue gasolina, solventes de limpieza en seco ni otras sustancias
explosivas o inflamables al agua del lavado. Estas sustancias emiten vapores
que pueden inflamarse o explotar. · En el caso de que se produzca una fuga de
gas (gas propano, gas licuado de petróleo, etc.), no ponga en funcionamiento
este artefacto ni ningún otro. Abra una puerta o una ventana para ventilar el
área de inmediato. · No utilice indebidamente los controles. · Asegure la
manguera de drenaje de forma segura en su lugar a manera de evitar
inundaciones. · No maltrate la puerta, no se siente ni se pare sobre ella. ·
Verifique siempre el interior del electrodoméstico para detectar objetos
extraños. · No permita que agua, blanqueador u otros líquidos permanezcan
dentro del tambor durante largos períodos de tiempo. Esto podría corroer el
tambor o provocar moho u olores. · No seque en el artefacto artículos que no
estén lavados.
Mantenimiento
· No repare ni reemplace ninguna parte del electrodoméstico. Todas las
reparaciones deben ser realizadas por personal de servicio calificado a menos
que se recomiende específicamente en este manual del propietario. Utilice sólo
piezas de fábrica autorizadas.
· Desconecte el artefacto del suministro eléctrico antes de limpiarlo o de
realizar cualquier tipo de mantenimiento que pueda realizar el usuario.
Colocar los controles en la posición de apagado no desconecta el artefacto del
suministro eléctrico.
· Quite el polvo o los materiales extraños de las clavijas del enchufe de
alimentación. · No desarme ni repare el artefacto por su cuenta. · Quite la
puerta antes de sacar de servicio o desechar el artefacto para evitar el
riesgo de que niños o
animales pequeños queden atrapados adentro. · Asegúrese de que la tapa o el
cajón del dispensador se encuentren siempre cerrados cuando no se les
estén colocando productos de lavandería.
Instrucciones de conexión a tierra
· La conexión inadecuada del conductor de conexión a tierra puede resultar en
riesgo de choque eléctrico. Pregunte a un electricista calificado o al
personal de servicio si no está seguro si el artefacto está
es-us_main.book.book Page 6 Wednesday, November 16, 2022 4:11 PM
6 INSTRUCCIONES IMPORTANTES DE SEGURIDAD
adecuadamente conectado a tierra. No modifique el enchufe que viene con el
artefacto. Si no cabe en el contacto, pida que un electricista calificado
instale un contacto apropiado. · El artefacto debe estar conectado a tierra.
En caso de funcionamiento defectuoso o avería, la conexión a tierra reduce el
riesgo de choque eléctrico al establecer una ruta de menor resistencia para la
corriente eléctrica. El artefacto viene equipado con un cable eléctrico que
tiene un conductor para conexión a tierra y un enchufe con conexión a tierra.
El enchufe debe ser conectado a un contacto apropiado que esté instalado y
conectado a tierra de acuerdo con todos los códigos y ordenanzas locales.
ESPAÑOL
es-us_main.book.book Page 7 Wednesday, November 16, 2022 4:11 PM
INSTRUCCIONES IMPORTANTES DE SEGURIDAD 7
MENSAJES DE PRECAUCIÓN
PRECAUCIÓN
· Para reducir el riesgo de lesiones leves o moderadas a personas, el mal
funcionamiento o daño al producto o propiedad cuando use este producto, siga
las precauciones básicas, incluidas las siguientes:
Instalación
· Instale el producto sobre un piso firme y nivelado.
FUNCIONAMIENTO
· No coloque ningún objeto encima del artefacto. · Cierre las llaves de agua y
desconecte el artefacto si este no será usado por un periodo de tiempo
prolongado, por ejemplo, durante las vacaciones. · SIEMPRE siga las
instrucciones para cuidado de los tejidos suministradas por el fabricante. ·
Use suavizantes o productos para eliminar la electricidad estática solamente
según las recomendaciones
del fabricante. · No combine productos de lavandería en una misma carga, a
menos que este uso se especifique en la
etiqueta. · No toque el agua de desagüe, ya que podría estar caliente. · Si
las mangueras de drenaje y de entrada de agua se congelan en invierno,
descongélelas antes de
utilizar el electrodoméstico. · No almacene ni vierta limpiadores,
blanqueadores (blanqueador con cloro, blanqueador oxigenado, etc.)
ni detergentes líquidos encima del artefacto. Si lo hace, podría ocasionar
corrosión, decoloración o daño de la superficie del artefacto. · Las prendas o
los artículos impermeables o resistentes al agua se deben lavar solo en el
ciclo Waterproof (Impermeables), Bedding (Ropa de Cama), Bulky/Large
(Voluminosas/Grandes) o Jumbo Wash (Lavado Jumbo). (Entre los ejemplos se
incluyen prendas resistentes al agua, fundas para colchones, prendas para
exteriores y tapetes de plástico). Si se utiliza otro ciclo, se pueden
producir lesiones personales o daños a la lavadora, a las prendas, a las
paredes, al piso y a los objetos circundantes, debido a la vibración anormal.
GUARDE ESTAS INSTRUCCIONES
es-us_main.book.book Page 8 Wednesday, November 16, 2022 4:11 PM
8 DESCRIPCIÓN GENERAL DEL PRODUCTO
DESCRIPCIÓN GENERAL DEL PRODUCTO
Características del producto
Las ilustraciones en esta guía pueden diferir de los componentes y accesorios
reales, los cuales están sujetos a cambios sin previo aviso por parte del
fabricante a fin de introducir mejoras en el producto.
ADVERTENCIA · Para su seguridad y para prolongar la vida útil del producto,
use solo componentes autorizados. El
fabricante no se hace responsable del mal funcionamiento del producto, los
daños a la propiedad o las lesiones corporales causadas por el uso de
componentes, partes o productos no autorizados adquiridos por separado.
Vista frontal
Vista trasera
a Panel de control b Bandeja dispensadora de detergente c Puerta d Filtro de la bomba de drenaje e Manguera de drenaje f Cubierta del filtro de la bomba de Drenaje g Patas de nivelación h Sello de la Puerta i Tambor
a Entradas de Agua b Tornillos de transporte c Cable de Alimentación d Manguera de drenaje
es-us_main.book.book Page 9 Wednesday, November 16, 2022 4:11 PM
Accesorios
Accesorios incluidos
DESCRIPCIÓN GENERAL DEL PRODUCTO 9
a Mangueras de agua caliente y fría
Accesorios opcionales (se vende por separado)
ESPAÑOL
a Apoyos antideslizantes b Tapones de agujeros c Llave d Correa e Codo de
soporte (para asegurar la manguera
de desagüe)
Accesorios requeridos (se vende por separado)
a Pedestal
b Pedestal lavador
c Kit de Apilamiento
Verifique el ancho del pedestal antes de comprar para asegurarse de que
coincida el ancho de su artefacto (27″ (70 cm) o 29″ (74 cm)).
Especificaciones del producto
Modelo
Requisitos eléctricos
Presión de agua mín./máx. Dimensiones (ancho X altura X
profundidad) Profundidad máxima con la
puerta abierta
Peso neto Velocidad máx. de centrifugado
WM5500H*A
WM6500H*A
120 V~, 60 Hz
20 psi – 120 psi (138 kPa – 827 kPa)
27” X 39” X 30 1/4” (70 cm X 99 cm 27” X 39” X 33 1/8” (70 cm X 99 cm
X 77 cm)
X 84 cm)
55” (139.6 cm)
57 3/4” (146.6 cm)
200.8 lb (91.1 kg)
1300 RPM
202.6 lb (91.9 kg)
es-us_main.book.book Page 10 Wednesday, November 16, 2022 4:11 PM
10 INSTALACIÓN
INSTALACIÓN
Antes de la instalación
Descripción general de la instalación
Lea las siguientes instrucciones de instalación inmediatamente después de
adquirir esta lavadora o transportarla a otra ubicación.
a
b
c
e
f
a Elección de la ubicación adecuada b Desempaque y retiro del material de transporte c Conexión de las mangueras de ingreso d Conexión de la manguera de desagüe e Nivelación de la lavadora f Revisión final de la instalación
ADVERTENCIA
· El traslado o la instalación del artefacto requieren de dos o más personas.
El incumplimiento de estas instrucciones podría causar lesiones.
· Almacene e instale el artefacto donde no esté expuesto a temperaturas bajo
cero ni a la intemperie. El incumplimiento de esta advertencia puede causar
daños al producto o las piezas, lesiones graves, incendios, descargas
eléctricas o la muerte.
· Conecte la lavadora a tierra adecuadamente, de acuerdo con todos los códigos
y las ordenanzas vigentes. El incumplimiento de esta advertencia puede causar
lesiones graves, incendios, descargas eléctricas o la muerte.
· Para garantizar una circulación de aire adecuada, no bloquee la abertura
grande que se encuentra en la parte inferior de la lavadora con tapetes u
otros materiales.
· No retire la clavija de conexión a tierra del cable de alimentación. No
utilice un adaptador ni un cable de extensión. Conecte a un tomacorriente de 3
clavijas con conexión a tierra. El incumplimiento de esta advertencia puede
causar lesiones graves, incendios, descargas eléctricas o la muerte.
es-us_main.book.book Page 11 Wednesday, November 16, 2022 4:11 PM
INSTALACIÓN 11
· Ciertas piezas internas no tienen conexión a tierra en forma intencional y
pueden presentar un riesgo de descarga eléctrica sólo durante la reparación.
Personal de servicio: No toque la bomba, la válvula, el motor o el tablero de
control cuando el aparato esté recibiendo energía.
ESPAÑOL
Herramientas necesarias
a Pinzas
b Destornillador de hoja plana
c Nivel
Elección de la ubicación adecuada
Revise los siguientes requisitos para la ubicación de instalación antes de
instalar la lavadora. · Permita que quede espacio suficiente entre los
muros y la lavadora para su instalación. · Asegúrese de que el piso esté
limpio, seco y libre
de polvo, suciedad, agua y aceite, para que las patas de nivelación no se
deslicen fácilmente. Las patas de nivelación que se muevan o deslicen por el
piso podrían contribuir a un exceso de vibración y ruido. · Si el piso es
demasiado flexible, refuércelo para volverlo más rígido. Si el piso no es
sólido, se podrían generar vibraciones y ruidos intensos. · Si es necesario
utilizar un depósito de drenaje, tenga mucho cuidado de seguir las
instrucciones que se proporcionan con este y asegúrese de que ajustar las
patas niveladoras para que tengan un contacto firme y uniforme con el
depósito. El uso de depósitos de drenaje y la falta de nivelación adecuada de
la lavadora pueden aumentar la vibración y el ruido durante el funcionamiento.
Tomacorriente
· El tomacorriente debe estar ubicado dentro de un perímetro de 60 pulgadas
(1.5 m) de cualquiera de los lados de la lavadora.
· Coloque la lavadora de manera que se pueda acceder fácilmente al
tomacorriente y el enchufe.
· No sobrecargue el tomacorriente conectándole más de un artefacto.
· El tomacorriente debe estar conectado a tierra según las regulaciones y los
códigos de cableado eléctrico vigentes.
· Utilice un interruptor de circuito o un fusible de acción retardada.
· Es responsabilidad y obligación personal del propietario de la lavadora
contar con un tomacorriente adecuado que haya sido instalado por personal de
servicio calificado.
Suelo
· Para minimizar ruidos y vibraciones, instale la lavadora en un piso
sólidamente construido y a nivel, que pueda brindar soporte a la lavadora sin
hundirse ni rebotar.
· La lavadora debe instalarse en un suelo firme para minimizar la vibración
que se produce durante el centrifugado. Los pisos de concreto son los más
indicados, pero un piso de madera es suficiente, siempre y cuando esté
construido conforme a las normas de la FHA.
· El piso debajo de la lavadora no debe tener una pendiente de más de 1
pulgada (2.5 cm) de lado a lado o de adelante hacia atrás.
· No se recomienda su instalación en superficies cubiertas por alfombras o
baldosas blandas.
· Nunca instale la lavadora sobre una plataforma ni sobre una estructura de
soporte débil.
Instalación en el piso Para garantizar el espacio suficiente para las
mangueras de entrada de agua y desagüe, y para la circulación de aire, deje un
espacio de, al menos, 1 pulgada (2.5 cm) a cada lado y 4 pulgadas (10 cm)
detrás de la lavadora. Asegúrese de tener en cuenta las molduras de pisos,
puertas o muros que podrían aumentar los espacios necesarios.
es-us_main.book.book Page 12 Wednesday, November 16, 2022 4:11 PM
12 INSTALACIÓN
Dimensiones y espacios
Modelo
WM5500H*A
WM6500H*A
A
55” (139.6 cm)
57 3/4” (146.6
cm)
B
30 1/4” (77 cm) 33 1/8” (84 cm)
C
4” (10 cm)
D
1” (2.5 cm)
E
27” (70 cm)
F
1/4” (0.5 cm)
Instalación Apilada o de Pedestal La lavadora puede apilarse debajo de un secador o sobre un pedestal o pedestal lavador.
D
Dimensiones y espacios
Modelo WM5500H*A
WM6500H*A
A
30 1/4” (77 cm)
33 1/8″ (84 cm)
B
4” (10 cm)
C
1” (2.5 cm)
D
27” (70 cm)
E
77 1/2” (196.8 cm)
F
1/4” (0.5 cm)
NOTA
· Consulte las instrucciones que se suministran junto con el kit de pedestal
opcional antes de instalar el electrodoméstico sobre el pedestal.
· No utilice una bandeja de drenaje con una instalación de pedestal o pedestal
lavadora, ya que ésta podría bloquear el cajón. Utilizar una bandeja de
drenaje podría causar un incremento en el ruido y la vibración durante la
operación.
Desempaque y retiro del material de transporte
Retire todo el material de transporte de la lavadora para su adecuada
operación y verifique que no haya daños provocados durante el envío.
PRECAUCIÓN · No remover el material de transporte podría
causar ruido y vibración excesiva.
Desempaque del material de transporte
Algunos modelos se envían sin soporte del tambor. Levante la lavadora de la base de espuma. · Luego de quitar el cartón y el material de
transporte, levante la lavadora de la base de espuma. · Asegúrese de que el
soporte plástico del tambor a salga junto con la base y que no quede atascado
en la parte inferior de la lavadora. · Si debe recostar la lavadora para
retirar la base de cartón b, siempre proteja sus lados y recuéstela con
cuidado sobre un costado. No apoye la lavadora sobre su parte posterior o
frontal.
- Retiro del material de transporte
1 Retire los ensambles de pernos.
· Comenzando por los dos pernos de transporte de la parte inferior c, use la llave incluida para aflojar por completo los 4 pernos de transporte haciéndolos girar a la izquierda.
es-us_main.book.book Page 13 Wednesday, November 16, 2022 4:11 PM
ESPAÑOL
· Retire los ensambles de pernos (pernos y retenedores) moviéndolos suavemente
a medida que tira de ellos.
2 Instale los tapones para los orificios.
· Localice los cuatro tapones para orificios d incluidos en el paquete de
accesorios o sujetos a la parte posterior de la lavadora. Instálelos en los
orificios de los ensambles de pernos.
PRECAUCIÓN · Después de retirarlos, guarde los ensambles de
pernos para uso futuro. Para evitar el daño de los componentes internos, no
transporte la lavadora sin volver a instalar los pernos de transporte. Si no
se retiran los pernos de transporte y los retenedores, existe la posibilidad
de que se produzcan ruidos y vibraciones intensas que podrían provocar daños
permanentes en la lavadora.
NOTA · El cable de alimentación está sujeto al lado
posterior de la lavadora con un perno de transporte para contribuir a evitar
que se haga funcionar el artefacto con los pernos de transporte colocados.
Conexión de las mangueras de entrada de agua
Para evitar costosos daños por agua, compre e instale mangueras de entrada de
agua nuevas al instalar la lavadora.
INSTALACIÓN 13
ADVERTENCIA · No apriete extremadamente ni cruce los
conectores de las mangueras. Al apretar en extremo o cruzar los conectores se
pueden dañar las válvulas o los acoplamientos y esto podría resultar en fugas
y daños a la propiedad.
· No reutilice mangueras viejas. Utilice únicamente nuevas mangueras al
instalar la lavadora. Las mangueras viejas podrían tener fugas o estallar
causando una inundación y daño a la propiedad. Contacte al Centro de
Información al Cliente de LG para asistencia en la compra de mangueras.
NOTA · Revise periódicamente las mangueras para
detectar rajaduras, fugas y desgaste, y reemplácelas cada cinco años.
· No estire intencionalmente las mangueras de agua y asegúrese de que no estén
apretadas, aplastadas ni plegadas por otros objetos.
· La presión del suministro de agua debe ser de entre 20 psi y 120 psi (138
827 kPa). Si la presión del suministro de agua es mayor que 120 psi, se debe
instalar una válvula reductora.
· El calentador de agua caliente se debe ajustar para que suministre agua a
una temperatura de 120 °F a 135 °F (48 °C a 57 °C) a fin de controlar las
temperaturas de lavado de manera correcta.
· No almacene ni instale la lavadora en un sitio sujeto a temperaturas de
congelamiento. Esto puede provocar daños a las mangueras de entrada de agua y
a los mecanismos internos de la lavadora. Si esta estuvo expuesta a
temperaturas de congelamiento antes de su instalación, déjela a temperatura
ambiente durante varias horas antes de utilizarla y compruebe que no presente
fugas antes de ponerla en funcionamiento.
· No utilice mangueras de prevención de inundaciones con dispositivos de
cierre automático, ya que pueden activarse durante el llenado y evitar que se
llene la lavadora de manera adecuada.
Cómo conectar las mangueras de entrada de agua
1 Verifique los conectores y los sellos.
Inspeccione el conector roscado de cada manguera y asegúrese de que cada una
cuente con un sello de goma a colocado en cada extremo para evitar fugas.
es-us_main.book.book Page 14 Wednesday, November 16, 2022 4:11 PM
14 INSTALACIÓN
que no existan fugas en los dos extremos de las mangueras.
2 Conecte las mangueras de suministro de
agua.
· Conecte las mangueras de suministro de agua a las llaves de paso de agua
caliente y fría y apriete las conexiones manualmente y luego utilice unas
pinzas para apretarlas otros 2/3 de vuelta.
· Conecte la manguera azul a la llave de agua fría y la manguera roja a la
llave de agua caliente.
Conexión de la manguera de desagüe
La manguera de drenaje puede ser instalada utilizando un tubo independiente o
un lavabo.
ADVERTENCIA · La manguera de desagüe siempre debe estar
conectada adecuadamente. Si la conexión de la manguera de desagüe no se
encuentra bien asegurada, podrían producirse inundaciones y daños a la
propiedad.
3 Enjuague las mangueras de entrada.
· Una vez que las mangueras estén conectadas, abra las llaves de agua y
enjuague toda sustancia extraña, como suciedad, arena y aserrín.
· Drene el agua en una cubeta y verifique la temperatura del agua a fin de
asegurarse de haber conectado las mangueras a las llaves de paso correctas.
4 Fije las mangueras de entrada a la parte
posterior de la lavadora. · Fije la manguera de entrada de agua
caliente a la entrada de agua caliente de la parte posterior de la lavadora.
Fije la manguera de entrada de agua fría a la entrada de agua fría de la parte
posterior de la lavadora. · Ajuste los conectores para asegurarlos bien. Abra
por completo ambas llaves y verifique
NOTA
· El desagüe debe estar instalado según las regulaciones y los códigos locales
vigentes.
· Asegúrese de que la manguera de desagüe no se encuentre estirada,
pellizcada, aplastada ni plegada.
· El extremo de la manguera de drenaje debe estar ubicado un mínimo de 24″ (61
cm) y un máximo de 96″ (244 cm) por encima de la parte inferior de la
lavadora.
· Para obtener mejores resultados, ubique el extremo de la manguera de drenaje
a no más de 66″ (168 cm) por encima de la parte inferior de la lavadora. A
medida que la salida de drenaje se eleva más de 66″ (168 cm), la función de
drenaje se verá cada vez más afectada.
· Nunca genere un sello hermético entre la manguera y el desagüe con una cinta
u otros medios. Si no existe una trampa de aire, se puede extraer el agua
desde el tambor, lo que perjudicará el rendimiento del lavado/enjuague o
dañará la ropa.
ESPAÑOL
es-us_main.book.book Page 15 Wednesday, November 16, 2022 4:11 PM
Uso de un tubo independiente para drenaje
1 Enganche el extremo de la manguera en el
codo de soporte. · Conecte el codo de soporte a a unas 4
pulgadas (10 cm) del extremo de la manguera de desagüe. Si la manguera de
desagüe se extiende a más de 4 pulgadas (10 cm) del extremo del codo de
soporte, podrían proliferar microorganismos o moho dentro de la lavadora.
4 ” (10 cm)
INSTALACIÓN 15
24 – 96 ” (61 – 244 cm)
24 – 96 ” (61 – 244 cm)
Uso del lavabo para drenaje
1 Enganche el extremo de la manguera en el
codo de soporte.
· Conecte el codo de soporte a a unas 4 pulgadas (10 cm) del extremo de la
manguera de desagüe. Si la manguera de desagüe se extiende a más de 4 pulgadas
(10 cm) del extremo del codo de soporte, podrían proliferar microorganismos o
moho dentro de la lavadora.
2 Inserte el extremo de la manguera de
desagüe en el tubo independiente.
4 ” (10 cm)
2 Cuelgue el extremo de la manguera de
desagüe sobre el borde del lavabo.
3 Utilice la correa proporcionada b para fijar la
manguera de desagüe en su lugar.
3 Utilice la correa proporcionada para asegurar
la manguera de desagüe en su lugar.
4 Si las válvulas de agua y de drenaje están
integradas a la pared, ajuste la manguera de desagüe a unas de las mangueras
de agua con la correa proporcionada c (lado acanalado hacia dentro).
es-us_main.book.book Page 16 Wednesday, November 16, 2022 4:11 PM
16 INSTALACIÓN
Nivelación de la lavadora
El tambor de la lavadora gira a velocidades muy altas. Para minimizar el
ruido, la vibración y los movimientos no deseados, la lavadora debe instalarse
en una superficie sólida y nivelada.
PRECAUCIÓN · Si se utiliza la lavadora sin nivelarla, se pueden
producir excesos de vibración y ruido y causar problemas en su funcionamiento.
· Ajuste las patas de nivelación solo en la medida necesaria para nivelar la
lavadora. Si las patas de nivelación tienen más altura de la necesaria, se
pueden producir vibraciones.
NOTA · Antes de instalar la lavadora, asegúrese de que
el piso esté limpio, seco y libre de polvo, suciedad, agua y aceite, para que
las patas de la lavadora no se deslicen fácilmente. Las patas que se muevan o
deslicen por el piso podrían provocar un exceso de vibración y ruido.
2 Ajuste las patas de nivelación.
· Gire las 4 patas de nivelación en una dirección para subir la lavadora y en
la otra dirección para bajarla.
3 Verifique el nivel nuevamente.
· Empuje o sacuda los bordes superiores de la lavadora de manera suave para
asegurarse de que no se balancee. Si la lavadora se balancea, reajuste las
patas de nivelación.
4 Ajuste las tuercas de seguridad b
· Gire las tuercas hacia la izquierda y apriételas cuando la lavadora esté
nivelada.
Nivelación de la lavadora
1 Coloque la lavadora en su ubicación final.
· Tenga especial cuidado en no pellizcar, estirar o aplastar las mangueras de
suministro de agua y drenaje. Si tiene un nivel de carpintero a, puede usarlo
para comprobar que la lavadora esté nivelada. La pendiente bajo la lavadora no
debe superar 1 pulg., y los 4 patas de nivelación deben estar firmemente
apoyadas en el suelo.
Uso de apoyos antideslizantes
Si instala la lavadora sobre una superficie resbaladiza, puede que esta se
mueva a causa de la vibración excesiva. Una nivelación incorrecta puede
resultar en un mal funcionamiento debi
References
- gscs-manual.lge.com
- gscs-manual.lge.com/
- LG Electronics & Home Appliances | Shop Now | LG USA
- LG Open Source
- LG Electronics & Home Appliances | Shop Now | LG USA
- Request Product Repair Service | LG USA Support
- LG Open Source
- Aide et soutien à la clientèle LG | LG CA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>