LOOKEE LK113 Tens Unit Ems Massage Muscle Stimulator Instruction Manual

LOOKEE LK113 Tens Unit Ems Massage Muscle Stimulator Instruction Manual

Model ：LK113

Product is subjected to the real object
Thanks for using our product.
Please keep this manual safe for future reference.
Please read this manual carefully before using it.

1. Product Profile

Working principle

It’s through electricity pulse wave after acting on the human body,the electric energy is sucked by the human body and the energy form is changed, which causes a series of physical and chemical changes, produces local or systemic physiological reactions, and finally affects the pathological process and plays a role Corresponding Role.

List of accessories

• Please use a 5V/1A adapter (input: AC100-240V/50/60Hz /0.2A).Adapters that do not meet the requirements may reduce the safety of the product. Please make sure that the selected adapters meet the relevant safety medical level safety certification requirements (example: IEC60601-1).
• After the connection, it will be charged automatically.

Note:

• This product does not come with an adapter, please purchase separately.
• If you have any problems with the adapters, consult your dealer at the place of purchase.

2. Intended use

For TENS mode: To be used for temporary relief of pain associated with sore and aching muscles due to strain from exercise or normal household work activities.
For EMS mode: To be used to stimulate healthy muscles in order to improve and facilitate muscle performance.
For MASSAGE mode: To be used for recovery of fatigue, improves blood circulation neuralgia.

3. Contraindications

• Acute disease, especially in patients suspected or suffering from hypertension, thrombosis or malignant mass.
• Patients with various skin diseases.
• Patients with chronic pain disorders (e.g. metabolic disorders) with reduced pain.
• Patients undergoing medication.

4. Product structure description

4.1 Low frequency therapeutic apparatus

4.2 Display

4.3 Warnings and Notes

Warning

We recommend not to use this therapeutic apparatus in the following cases:

1. Do not use this device if the patient has any implantable electronic or metal equipment. (e.g. pacemaker).
2. Has epilepsy.
3. Severe lower extremity arterial circulation problems.
4. Abdominal or inguinal hernia site.
5. Do not use this device if you have a heart disease without consulting a doctor.
6. During pregnant.
7. Has cancer.
8. Be Fever.
9. Do not use therapeutic instruments in high humidity environments, such as bathing or showering in a bathroom bathtub.
10. Can not be used after drinking.
11. Low-frequency therapeutic instruments can not be used when usinghigh-frequency surgical instruments.
12. Near the genitals.
13. Recommendation: do not use low-frequency therapeutic instrumentsnear shortwave or microwave therapeutic equipment ,(e.g .1 M), where the output of the low frequency therapeutic instrument used isunstable.
14. The high frequency surgical equipment and stimulatorr. Whenconnected to a patient, burns may occur at the stimulator electrodeand may damage the stimulator.
15. Patients undergoing medical treatment and feeling abnormal.
16. Heart patients with neurological abnormalities in the brain.
17. Patients whose body temperature exceeds 38℃ degrees.
18. Infectious diseases Patients.
19. Patients who can not express their will.
20. Do not use this product while charging.

Note:

1. Make sure you are always aware of all warning items.
2. Stimulators should not be used in the throat and mouth. This may result in severe throat muscle spasms and muscle contraction,which issufficient to block the airway and cause dyspnea.
3. Stimulator should not be used in front of the chest, the current introduced into the heart may cause arrhythmia To cause the heartbeat to stop.
4. This stimulator should not treat unattended patients, or suffer fromemotional distress, dementia, and low IQ Personnel use.
5. Use guidance has been detailed; any improper use may lead to danger.
6. Do not use this device for any undiagnosed pain symptoms, consult adoctor for diagnosis before use.
7. Electrodes can not be placed in areas that may cause current to passthrough the brain. (i.e. electrodes.One-sided can not be placed on thefront and back of the head at the same time, or relative to the left and right sides of the head).
8. Patients suffer from heart disease, cancer or other health-threatening conditions, they should not consult a doctor in advance use this device under the condition of birth.
9. If the intensity of stimulation makes you feel uncomfortable, reduce the intensity of stimulation to a comfortable level if the problem remains.If so, please contact your doctor.
10. Do not use this equipment in rooms where aerosol (spray) and pure oxygen are used.
11. Please do not use this equipment near any highly flammable substances, gases or explosives.
12. Please check that the cable and related connections are in good condition before each use.
13. Turn off the device before using or removing the electrode pad.
14. Electronic stimulators can only use electrode wires and electrodes recommended by manufacturers.

Consult your doctor before using the device, especially if:

• Acute disease, especially in patients suspected or suffering from hypertension, thrombosis or malignant mass.
• Patients with various skin diseases.
• Patients with chronic pain disorders (e.g. metabolic disorders) withreduced pain.
• Patients undergoing medication.

Adverse reactions

• Skin allergies caused by electrode sheetpad gels and electrode irritationburns are potential adverse reactions. If the skin appears sensitiveresponse, should be discontinued and consult your doctor.
• If the intensity of stimulation makes you feel uncomfortable, reducethe intensity of stimulation to a comfortable level, and if the problempersists,Please contact your doctor.

5. Product description

5.1 Instructions
Please make sure the battery is sufficient before use, if the battery is insufficient, please charge it in time.

Do not use this product while charging.

1. The electrode pad is inserted into the electrode line.
2. Insert the electrode plug into the treatment instrument.
3. Attach electrodes pad to the site to be treated.
4. Press the Power button and select the program (Refer to 7).

Attention
About electrode

• Don’t use it by overlapping.
• Do not bend the electrode pad.
• Please try not to touch the adhesive surface with your fingers.
• After bathing or sweating after exercise, please wipe the parts to be treated before use.
• Don’t pull the electrode wire. This will damage the wires and electrodepad.
• Do not apply to damaged skin.
• If the electrode pad is not sticky, please replace it in time.
• The electrode pad is only for one patient.
• If allergy is found, stop using immediately and consult your doctor.
• Please read the instruction of self-adhesive electrode before use.
• When the electrode pad is stuck to the clothes, don’t tear it off heavily. As long as the inside of the side with the electrode pad is covered withwater, it can be removed easily.

5.4 TENS/MASS/EMS

TENS
Percutaneous nerve electrical stimulation, meaning electrical stimulation of the nerve through the skin. It’s a non-drug A method of treating pain caused by certain causes.TENS electrical stimulation from the skin by small electrical pulses skin is sent to the nerve to modify your perception of pain. Electrical stimulation doesn’t cure any physical problems, it’s just help control pain. Electrical stimulation doesn’t work for everyone, but for most patients it’s reducing or eliminating in addition to pain is effective, so that patients can return to normal activity.

MASS

Suitable for relaxing body, relieving fatigue, reducing stress and improving sleep.

EMS

Muscle electrical stimulation It has been widely used in sports and rehabilitation for many years and is widely used approved methods. Among the EMS uses in sports and fitness is to complement traditional muscle training, Increase the effectiveness of muscle groups and adapt them to the body ratio to achieve the desired aesthetic effect. EMS applications two aspects of the effect. On the one hand to achieve the effect of muscle tissue enhancement (activation application); on the other hand to achieve the effect of relaxation and rest (relaxation application).

5.5 Paste the electrode pad to the area to be treated
1)Shoulder: The shoulder may be hard because of moving shoulder, or because the left shoulder is under heavy pressure, there will also beleft shoulder pain, such as sometimes with the left shoulder to lift the heavier things. If take the spine as the center and paste it symmetrically on the hard part of the shoulder.

6. Treatment procedures

6.3 strength settings
40 intensity levels
Choose the appropriate intensity between 0~40 according to your personal preference.

7. Operation mode

7.3 Treatment mode (non-locking condition).

8. After the treatment is completed

8.1 Arrangement
The electrode pad is exposed and easy to become dirty and make the viscosity decrease, so please stick the electrode pad to the original place after treatment.

1. Turn off the power and unplug the electrode from the body.
   pulling the plug from the body, do not pull the wire, but hold the plug out.

2. Remove electrodes from skin.
   • Grab a corner and remove the electrode pad. Please do not contact the adhesive surface in a large area.
   • Do not pull the wire. Otherwise, it may lead todisconnection.(with pictures of pulling electrodesfrom the skin)Stick the electrode pad gently to the original electrode pad sticker.
   • Do not press the electrode hard, will cause paste surface damage.
   • Do not pull the electrode sheetpad or wire connection.
   • Please operate patiently to prevent excessive bending of the electrode pad.
   • Please keep the electrode pad sticker clean.

3. Store the body, electrode sheet pad and wire into the original packing box to prevent contamination.

Attention
keeping the body. Do not roll the wire on the body. wire may be excessively bent near the plug, resulting in breakage.

8.2 Maintenance and custody
Maintenance methods

Please clean the body regularly.

• After power off, be sure to unplug the electrodesheetpad from the body and maintain it.
• If there is dirt in the body, please wipe it with dry soft cloth.
• If the is particularly dirty, use soft cloth with some water or neutral lotion, fully wring dry after wiping the body, and then wipe with dry soft cloth.

※Do not let water and other liquids flow into the body.

Maintenance of electrodes
When the paste surface of the electrode sheetpad is dirty and difficult to paste, the soft cloth with water can be used to wet the adhesive surface and wipe off the dirt, which can temporarily restore the viscosity. But if the moisture is too much, it will lead to a decrease in viscosity.

※ Electrodes not washable, Otherwise, it may cause electric shock or accident. )

• Replacement cycle
  The electrode sheetpad is consumable. When paste surface damage, please
  stop using and buy other products.

• Do not put electrodes in high temperature, humidity, direct sunlight.

• Maintenance and custody precautions

• Don’t wipe dirt with thinner, gasoline, etc

• During maintenance, please handle the electrodes carefully
  – Not bendable
  – Do not force or drag.
  – Do not touch water

• Do not keep it in the following places
  – Places with water.
  – High temperature, humidity, direct sunlight, dust and salt in the air.
  – Places of inclination, vibration, shock.
  – Places where chemicals are kept and where corrosive gases are produced.

• Please place where the baby can not touch.

If you do not comply with the above notice and the correct method of use, we will not be responsible for the quality of the product.

※ Do not carry out any repairs privately.

8.3 Application program
1) For EMS mode

2) For TENS mode

9. Anomalies (failures and solutions)

10. Product specifications

11. Final disposal

Please do not dispose of the product in the household waste at the end of it useful life. To protect the environment, dispose of empty batteries at appropriate collection sites according to national or local regulations.

12. Standardized symbolic description

13. Electromagnetic compatibility information

FCC STATEMENT

FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Note:

• Important information regarding Electro Magnetic Compatibility (EMC).

• With the increased number of electronic devices such as PC’s and mobile (cellular) telephones, medical devices in use may be susceptible to electromagnetic interference from other devices. Electromagnetic interference may result in incorrect operation of the medical device and create a potentially unsafe situation. Medical devices should also not interfere with other devices. In order to regulate the requirements for EMC (Electro Magnetic Compatibility) with the aim to prevent unsafe product situations, the EN60601-1-2 standard has been implemented. This standard defines the levels of immunity to electromagnetic interferences as well as maximum levels of electromagnetic emissions for medical devices. Nevertheless,
  special precautions need to be observed:

• Do not use mobile (cellular) telephones and other devices, which generate strong electrical or electromagnetic fields, near the medical device.
  This may result in incorrect operation of the unit and create a potentially unsafe situation. Recommendation is to keep a minimum distance of 7 m. Verify correct operation of the device in case the distance is shorter

Warning:

• Use of this equipment adjacent to or stacked with other equipment should be avoided because it could result in improper operation. If such use is necessary, this equipment and the other equipment should be observed to verify that they are operating normally.
• Portable RF communications equipment (including peripherals such as antenna cables and external antennas) should be used no closer than 30 cm (12 inches) to any part of the LK113, including cables specified by the manufacturer. Otherwise, degradation of the performance of this equipment could result.

Guidance and manufacturer’s declaration – electromagnetic immunity – for all EQUIPMENT and SYSTEMS

Recommended separation distances between portable and mobile RF communications equipment and the EQUIPMENT or SYSTEM – for EQUIPMENT and SYSTEMS

14. GUARANTEE

1. The warranty period for device is one year from date of delivery. In case of a warranty claim, the date of delivery has to be proven by means of the sales receipt or invoice.

2. Repairs under warranty do not extend the warranty period.

3. The following cases are excluded under the warranty
   • All damage which has arisen due to improper treatment, e.g. nonobservance of the user instruction.
   • All damage which is due to repairs or tampering by the customer or unauthorized third parities.
   • Damage which has arisen during transport from the manufacturer to the consumer or during transport to the service centre.
   • Accessories which are subject to normal wear and tear.

4. Liability for direct or indirect consequential losses caused by the unit is excluded even if the damage to the unit is accepted as a warranty claim.

Customer Support:
LOOKEE® Tech
24/7 Customer Support: Support@LookeeTech.com
Live Chat with us at www.LookeeTech.com

BEST-SUPPLIER INTERNATIONAL INC.
(LOOKEE® Tech)
999 W Broadway, #720, Vancouver, BC V5Z 1K5, Canada
US Office: 99 Wall Street #1698, New York, NY 10005

EC REP

Name: Shanghai International Holding Corp. GmbH (Europe)
Add: Eiffestrasse 80, 20537 Hamburg, Germany

Read More About This Manual & Download PDF:

References

• LOOKEE Sleep Oxygen, EKG Monitor Tracker CPAP & Sleep Apnea at Home – LOOKEETech

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>