WATCH WINDER MSA19.360 Watch Winding Case Instruction Manual
- June 9, 2024
- WATCH WINDER
Table of Contents
WATCH WINDER MSA19.360 Watch Winding Case
Instruction
- Thank you for purchasing this product.
- Please take a few minutes to read through the manual to ensure proper operation.
- Please keep the instruction manual for future reference.
Item Specification
- Power AC adapter DC/4V 550mA
- Size 151 x 151 x 171 mm (Wx HxD)
- Weight About 350g (without adapter)
- Temperature Operate between 5°C40°C
Accessory
- AC Adapter
Operation
- Insert the adapter into the adapter port and plug it into the electrical outlet.
- Open the front cover, then use your index finger and thumb to hold the watch pillow from the two sides of the pillow hitch marked with two arrows. With some force, pull out the watch pillow.
- Place the watch on the pillow by pushing in the spring on the back of the pillow, then put your watch around the pillow and let go of the spring.
- Once the watch is on the pillow, place the pillow back into the winder. Push until you hear a click signifying that it is securely in the winder.
- Use the touch button on the unit to select as below: Use Power touch button to select winder rotating direction or turn off the unit.
Use TPD touch button to select the TPD you wanted.
TPD Turns Per Dav)
Mode A: 650TPD, rotate 5 minutes, rest 79 minutes and then repeat
Mode B: 900TPD, rotate 5 minutes, rest 56 minutes and then repeat.
Mode C: 1200TPD, rotate 5 minutes, rest 41 minutes and then repeat.
Mode D: 1500TPD, rotate 5 minutes, rest 32 minutes and then repeat.
Watch Pillow
Place the watch pillow into the winder. Push until you hear a “CLICK” signifying that it is securely in the winder.
Attention
If you do not use this product for a long time, please switch off the unit.
Make sure to turn the unit off completely before attempting to pull out the
watch pillow.
Note
- Please use the AC adapter supplied with the unit. Input: AC/100-240V, 50-60Hz Output: DC/4V 550mA
- Remove the adapter when the winder is not in use.
- Always turn off the power when inserting or removing watches.
- Don’t shake the watch winder when the winder is in operation.
Read User Manual Online (PDF format)
Loading......