MD CAR2011-B1 Electric Pylon System User Guide
- June 9, 2024
- Electric Pylon System
Table of Contents
MD CAR2011-B1 Electric Pylon System
Parts
Safety Information
For using this product properly and safely, please follow the contents of the Installation and Operation Manual to install. It is suggested that this Electric Stand applies to the 55-86 inch interactive Large Format Display. Use with other equipment may result in instability causing injury. This stand can carry a maximum weight of 80KG, and a maximum VESA mounting of 800 x 600mm.
Important safety information for both installer and user
Installer:
Before starting the installation, read the safety information and the rest of
this product manual carefully. Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury, and damage to
the equipment!
User:
Please carefully read the safety information and user manual (if included)
before using the product to ensure a failure-free working unit and avoid
accidents.
Electrical Safety
Connect the unit to a properly grounded outlet only. Make sure the unit can be
immediately separated from the power outlet. Only use the unit in dry rooms,
protect it from water and other liquids. Clean the unit with dry cloth only.
Do not open the lift unit. RISK OF ELECTRIC SHOCK. There are no serviceable
parts inside. In case of dysfunction, unplug the unit from the power outlet
and contact an authorized technical service person.
Do not overuse the cable(s) or damage it in any other way. Replace damaged cable(s) immediately with new identical cable(s). The socket outlet shall be easily accessible when a power cable is used as a disconnect device. Disconnect the power cable from the power outlet before moving the product. The unit does not have dripping or splashing protection. Do not place any liquid objects on or spray the unit. To reduce the risk of electric shock, always unplug the power from the power outlet before cleaning.
Mechanical safety
- Always keep the product’s moving path free from obstacles.
- Before moving the unit up or down, assure at least a 20 cm/7.9-inch safety distance from any part of the unit to any other elements in order to avoid shear traps or squeezing points.
- In case of an accident, please stop operating immediately.
- Only operate the unit with wheels on a plane and stable floors. Move the unit to plane floors only.
- Risk of lilting when overrunning door sills, uneven floor, and similar.
- Severe risk of injury when the unit tips over. Always move the product with the display in the lowest position.
- Do not push the Electric Stand from the front or back of the lift.
- Do not move the Electric Stand by pushing on Display.
- The bottom of the display height is not over 0.85m from the ground after installation.
- Hazardous moving parts keep fingers and other body parts away.
- Exceeding the weight capacity can result in serious personal injury or damage to equipment.
- It is the installer (s responsibility to make sure the total weight including accessories does not exceed the maximum load of 176 lbs / 80 kg. Use with heavier screens may result in instability causing tip-over and resulting in death or serious injury. The height adjustable feature will not function properly if the total weight exceeds the given maximum load. The installation, maintenance, and uninstallation of the product should be handled by trained professional and skilled personnel.
The intended use of the product:
The product is intended to be used for the mounting and height adjustment of
passive or interactive larger format displays. The product is intended for
indoor usage in classrooms, offices, or meeting rooms at temperatures between
O to 40 °C. Please make sure the indoor environment is dry and cool. Normal
operating humidity is 10%-90%RH. Do not use this product in an outdoor
environment.
The product is intended to use by adults; children under the age of 16 should only use the product under adult supervision. Duty cycle: 6 min on/ 30 min off. The Electric Stand motors are intended for intermittent use, continuous or extended use (more than 6 minutes) will cause overheating and the safety system will switch the motors off, if motors overheat occurred, please cool down the motors at least 30 minutes before re-operating. The system will automatically switch back to normal when the motors have cooled down.
Anti-collision function: the product will be stopped and moved up 50mm automatically when detected obstacle/jitter during descending operation, in the opposite of the ascending operation, the product will be stopped automatically when detected obstacle/jitter.
Installation
Lock the wheels
Pay attention to the installation direction
Control Mode
Control Pad
There are two buttons on the Control Pad, corresponding to the UP Key and DOWN key of the Control Panel.
No. Items/Function description
- UP Control the ascending
- Down Control the descending
NOTE:
When using the lift stand for the first time, press the Down(2) button for
5s to reset the stand, the column will go down to the lowest point and lift up
7mm to complete the reset.
Function
The software of the interactive Large Format Display
https://iiyama.com.
Step 1:
Ensure that the interactive Large Format Display is connected to the Electric
Stand by USB Cable(6).
Step 2:
Turn on the interactive Large Format Display, and the sidebar of the
interactive Large Format Display will display the control button of the
Electric Stand.
Motorized stand
No. Items/Function description
- UP Control the ascending
- Down Control the descending
- Lift memory (1) Long press the button till the display shows “Save the first height”. Next time you click the button, the height of the stand will be automatically adjusted to the memorized first height.
- Lift memory (2) Long press the button till the display shows “Save the second height”. Next time you click the button, the height of the stand will be automatically adjusted to the memorized second height.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>