RAZER KAIRA FOR XBOX Wired Headset User Guide
- June 9, 2024
- Razer
Table of Contents
- Introduction
- WHAT’S INSIDE / WHAT’S NEEDED
- LET’S GET YOU COVERED
- TECHNICAL SPECIFICATIONS
- GETTING STARTED
- USING YOUR RAZER KAIRA FOR XBOX
- SAFETY AND MAINTENANCE
- LEGALESE
- LIMITED PRODUCT WARRANTY
- LIMITATION OF LIABILITY
- GENERAL
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
RAZER KAIRA FOR XBOX Wired Headset User Guide
Introduction
Take your competitive advantage to the next level and exert true console dominance with the Razer Kaira for Xbox—a wireless Xbox Series X headset that offers superior audio immersion with our most powerful drivers ever, and crystal-clear voice comms with the best headset mic we’ve ever designed.
WHAT’S INSIDE / WHAT’S NEEDED
WHAT’S INSIDE
-
Razer Kaira for Xbox
- A. Auto-adjusting headband
- B. Breathable memory foam ear cushions
- C. Game / Chat balance wheel
- D. EQ / Xbox Pairing button
- E. Bendable Razer™ Hyper Clear cardioid mic
- F. Charging port
- G. Power button
- H. Status indicator
- I. Volume wheel
- J. Mic mute switch
-
Charging cable
-
Important Product Information Guide
WHAT’S NEEDED
- Xbox One TM / Xbox One TM S / Xbox One TM X / Xbox Series TM X|S OR
- PC (Windows® 10 64-bit or higher) with a free USB port*
Internet connection for app installation
*May require the Xbox Wireless Adapter for Windows 10 (not included).
SAFETY STATEMENT
IMPORTANT! Before using your Xbox console with this product, read its instruction manual for safety, health, and other information regarding the use of your Xbox console.
LET’S GET YOU COVERED
You’ve got a great device in your hands, complete with a 2-year limited
warranty coverage.
Now maximize its potential and score exclusive Razer benefits by registering
at: razerid.razer.com
Got a question? Ask the Razer Support Team at:
support.razer.com
TECHNICAL SPECIFICATIONS
HEADPHONES
- Frequency response: 20 Hz – 20 kHz
- Impedance: 32Ω at 1 kHz
- Sensitivity (@1 kHz): 108 dB
- Drivers: 50 mm, with Neodymium magnets
- Inner ear cup diameter: Width 56mm / Length 67mm
- Oval ear cushions: Designed for full-ear coverage with heat-transfer fabric, perfect for longwearing comfort
- Connection type: Direct to Xbox / via Xbox Wireless Adapter for Windows 10
- Wireless range: 10 m / 30 ft
- Wireless frequency: 2.4 GHz / 5 GHz
- Battery life: Up to 15 hours
MICROPHONE
- Frequency response: 100 – 10,000 Hz
- Signal-to-noise ratio: > 60 dB
- Sensitivity (@1 kHz): -54 ± 3 dB
- Pick-up pattern: Unidirectional
GETTING STARTED
CHARGING YOUR HEADSET
Connect your Razer Kaira for Xbox to a powered USB port using the charging
cable.
For best results, please fully charge your headset before using it for the
first time.
A depleted headset will fully charge in about (4) hours.
While charging, your Razer Kaira for Xbox will continuously show its battery
level on the status indicator.
PAIRING YOUR HEADSE T
A. TO YOUR XBOX CONSOLE
-
Press the Connect button on your console.
-
Press and hold the power button until the status indicator is briefly lit or until you hear a tone.
-
Wait until the status indicator becomes static green, indicating that the headset is now paired to the Xbox console.
**B. TO YOUR PC VIA XBOX WIRELESS ADAPTER FOR WINDOWS 10***
Make sure that your Xbox Wireless Adapter for Windows 10 is up-to-date.
Some systems have Xbox Wireless built in which allows you to pair your headset
by using Bluetooth & other devices in Settings.
-
Plug in your Xbox Wireless Adapter for Windows 10* to your PC and then press its Connect button.
-
While powered off, press and hold the power button until the status indicator is lit, or until you hear a tone.
-
Wait until the status indicator becomes static green, indicating that the headset is now paired to the wireless adapter.
USING YOUR RAZER KAIRA FOR XBOX
POWER BUTTON
Power on or off your headset by holding the power button until the status
indicator is on; and press and hold the button again to turn off.
Two distinct tones will help notify you that the headset is powered on or off.
BATTERY LEVEL
When unplugged and powered on, the status indicator will briefly show the
connection and battery status.
While in use, there will be a tone notification when the headset needs to be
recharged; during such time, the indicator will continue showing the battery
status until you charge the headset.
EQ / XBOX PAIRING BUTTON
Pairing Mode
When pairing the headset to a different Xbox console or wireless adapter, use
the EQ / Xbox Pairing button to activate its pairing mode. While powered on,
press and hold the EQ / Xbox Pairing button until the status indicator starts
to blink in green or until you hear a tone, indicating that the headset can
now be paired to a different Xbox console or wireless adapter.
EQ presets
Double press the EQ / Xbox Pairing button to switch between the equalizer
presets available on the headset.
Pre set | Description |
---|---|
Default | All-around balance of audio clarity and bass |
Bass Boost | Immerse more on solid, realistic bass |
FPS | Hear the most subtle of footsteps sneaking from behind |
Custom | Your own custom balance of audio clarity |
This preset will only be available when you customize a preset on the Razer Headset Setup for Xbox app.
VOLUME WHEEL
Rotate the volume wheel to increase or decrease the volume.
GAME / CHAT BALANCE
Rotate the Game / Chat balance wheel to increase the in-game volume and
decrease the voice chat volume or vice versa.
By default, the notch on the wheel is set to the middle to indicate 50% chat
and 50% game volume.
MICROPHONE
Bend the mic until it is parallel to your mouth.
Make sure the mic diaphragm is in front and the air vent is facing away from
your mouth.
Slide the mic mute switch to mute or unmute the microphone.
COMFORT
It’s recommended to gently stretch the headset before placing it over your
head to minimize headband stress however, don’t stretch the headset beyond its
limits.
RAZER HEADSET SETUP FOR XBOX APP
Use the Razer Headset Setup for Xbox app to personalize your own EQ preset
which you can set as the Custom preset of your headset, enable mic monitoring
to hear your own voice through the headset, and even adjust other mic features
for a truly immersive gaming experience.
Download and install the Razer Headset Setup for Xbox app from the Microsoft
Store on your gaming console or PC.
SAFETY AND MAINTENANCE
SAFETY GUIDELINES
In order to achieve maximum safety while using your Razer Kaira for Xbox,
we suggest that you adopt the following guidelines:
Should you have trouble operating the device properly and troubleshooting does
not work, unplug the device and contact the Razer hotline or go to
support.razer.com for assistance.
Do not take apart the device (doing so will void your warranty) and do not
attempt to operate it under abnormal current loads.
Keep the device away from liquid, humidity or moisture.
Operate the device only within the specific temperature range of 0°C (32°F) to
40°C (104°F).
Should the temperature exceed this range, unplug and/or switch off the device
in order to let the temperature stabilize to an optimal level.
The device isolates external ambient sounds even at low volumes, resulting in
lowered awareness of your external surroundings.
Please remove the device when engaging in any activities that requires active
awareness of your surroundings.
Listening to excessively loud volumes over extended periods of time can damage
your hearing.
Furthermore, legislation of certain countries permits a maximum sound level of
86db to affect your hearing for 8 hours a day.
We therefore recommend that you reduce the volume to a comfortable level when
listening for prolonged periods of time.
Please, take good care of your hearing.
MAINTENANCE AND USE
The Razer Kaira for Xbox requires minimum maintenance to keep it in optimum
condition.
Once a month we recommend you clean it using a soft cloth or cotton swab to
prevent dirt buildup.
Do not use soap or harsh cleaning agents.
LEGALESE
COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION
©2020 Razer Inc. All rights reserved. Razer, the triple-headed snake logo,
Razer logo, and “For Gamers.
By Gamers.” are trademarks or registered trademarks of Razer Inc. and/or
affiliated companies in the United States or other countries.
All other trademarks are the property of their respective owners.
Microsoft, Xbox, Xbox “Sphere” Design, Xbox One and Xbox Series X|S are
trademarks of the Microsoft group of companies.
All other trademarks are the property of their respective owners.
Razer Inc. (“Razer”) may have copyright, trademarks, trade secrets, patents,
patent applications, or other intellectual property rights (whether registered
or unregistered) concerning the product in this guide.
Furnishing of this guide does not give you a license to any such copyright,
trademark, patent or other intellectual property right.
The Razer Kaira for Xbox (the “Product”) may differ from pictures whether on
packaging or otherwise.
Razer assumes no responsibility for such differences or for any errors that
may appear.
Information contained herein is subject to change without notice.
LIMITED PRODUCT WARRANTY
For the latest and current terms of the Limited Product Warranty, please visit: razer.com/warranty.
LIMITATION OF LIABILITY
Razer shall in no event be liable for any lost profits, loss of information or
data, special, incidental, indirect, punitive or consequential or incidental
damages, arising in any way out of distribution of, sale of, resale of, use
of, or inability to use the Product.
In no event shall Razer’s liability exceed the retail purchase price of the
Product.
GENERAL
These terms shall be governed by and construed under the laws of the
jurisdiction in which the Product was purchased.
If any term herein is held to be invalid or unenforceable, then such term (in
so far as it is invalid or unenforceable) shall be given no effect and deemed
to be excluded without invalidating any of the remaining terms.
Razer reserves the right to amend any term at any time without notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>