LG SE6 Smart Sound Bar Instruction Manual

: June 9, 2024
: LG

Table of Contents

Industry Canada Statement
CAN ICES-003(B) / NMB-003(B)
- IC Radiation Exposure Statement
WARNING
Installing and Using the Product
Specification
- AC adapter
- Open Source Software Notice Information
CUSTOMER SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LG SE6 Smart Sound Bar

LG SE6 Smart Sound Bar

Industry Canada Statement

[For having wireless function (WLAN, Bluetooth,…)] This device contains license-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

CAN ICES-003(B) / NMB-003(B)

IC Radiation Exposure Statement

[For having wireless function (WLAN, Bluetooth,…)] This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the antenna & your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT

WARNING

[For product having the wireless function using 5 GHz frequency bands]

the device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250- 5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;
for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725- 5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate; and
[for devices operating in the band 5250-5350 MHz having an e.i.r.p. greater than 200 mW] antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 of RSS-247 shall be clearly indicated.

Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

Installing and Using the Product

Please read this manual carefully before operating your set and retain it for future reference. To view the instructions of advanced features, visit http://www.lg.com or scan QR code and then download Owner’s Manual. Some of the content in this manual may differ from your product.

A Sound bar
B Remote Control Receiver
C Status LED ① ② ③
D External Device – (Blu-ray player, game console, etc.)

| | | | | | |
---|---|---|---|---|---|---|---
Red blinking| White blinking| White| Blue blinking| Blue| White| White| Purple
Power on Power off| Wi-Fi ready| Wi-Fi| Bluetooth ready| Bluetooth| OPTICAL / HDMI ARC| HDMI IN| USB

Connect the sound bar to your TV via an optical cable or an HDMI cable.

If you are using an external device (ex. Set-top box, Blu-ray player, game console, etc.), connect it to the sound bar or to the TV via an HDMI cable.

If necessary, purchase HDMI cables, an optical cable, or a USB extension cable to connect the sound bar.

Using the product with your TV

Press the Function button repeatedly until LED1 and LED2 light up white. If you are using an external device that is connected to HDMI™ IN on the sound bar, press the Function button repeatedly until LED1 and LED3 light up white.
On your TV’s settings, set the output speaker to [HDMI ARC], [Optical], or [External Speaker].
You can enjoy the sound by connecting LG WOWCAST (Sold separately, WTP3) to the sound bar wirelessly

Connecting the product to your smartphone via Wi-Fi

Connect your smartphone to Wi-Fi.
Install the LG Sound Bar app on Google Play or the App Store.
Run the LG Sound Bar app and follow the instructions.
The product will connect to your smartphone and you can control the product with LG Sound Bar app

Connecting the product to your smartphone via Bluetooth

Tap the Settings button on your smartphone and select Bluetooth. Turn on the Bluetooth function. ( Off > On)
Press the Bluetooth pair button. After a moment, LED2 blinks blue.
Find and tap “LG_Speaker_SE6S_XXXX” or the name you registered on the Google Home app.
When the product is connected to your smartphone via Bluetooth, all LEDs light up blue.

Keep the sound bar away from the device (ex. wireless router, microwave oven, etc.) over 1 m (3.3 ft) to prevent wireless interference.

Design and specifications are subject to change without notice.
Google Play is a trademark of Google LLC.

Specification

Power consumption

Refer to the main label.

AC adapter

Model: MS-Z2610R230-065E0-P
Manufacturer: MOSO POWER SUPPLY TECHNOLOGY CO., LTD.
Input: 100 – 240 V ~ 50/60 Hz
Output: 23 V 0 2.61 A

Dimensions (W x H x D): Approx. 800.0 mm x 63.0 mm x 131.0 mm (31.5 inch x 2.5 inch x 5.2 inch)
Bus Power Supply (USB): 5 V 0 500 mA
Amplifier (Total RMS Output power): 100 W RMS

Open Source Software Notice Information

To obtain the source code that is contained in this product, under GPL, LGPL, MPL, and other open source licenses that have the obligation to disclose source code, and to access all referred license terms, copyright notices and other relevant documents, please visit https://opensource.lge.com.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.

This offer is valid to anyone in receipt of this information for a period of three years after our last shipment of this product.