ITC 2319X-XX Whisper Latch Instruction Manual
- June 9, 2024
- ITC
Table of Contents
ITC 2319X-XX Whisper Latch
PARTS/TOOLS NEEDED
PARTS/TOOLS NEEDED:
| ****|
Whisper Latch Assembly| 1” Spade Bit
(Not Provided)
| Power Drill
(Not Provided)
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL INSTRUCTIONS.
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- It is recommended that fuse protection be added to the positive (+) input.
- Note: The 23199 (shown above) will contain a self latching lever that holds the door in place even when the lock is not engaged. The 23190 and 23193 do not include this lever.
- Determine the installation location and drill a 1” hole using a spade bit. Mark the location for the mounting screws and pre-drill. Insert the round collar into the hole.
- Push the round knob through the hole and attach the latch assembly with the black shim to the door using the screws provided.
- Determine the installation location for the latch. Mark the location and secure the latch via screws.
- Push the switch to ensure latch is in working order.
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
For warranty information please visit www.itc-us.com/warranty-return-
policy
DOC #: 710-00205 • Rev B • 01/31/2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>