RAZER KRAKEN V3 HYPERSENSE PC Gaming Headset User Guide
- June 9, 2024
- Razer
Table of Contents
- RAZER KRAKEN V3 HYPERSENSE PC Gaming Headset
- WHAT’S INSIDE / WHAT’S NEEDED
- LET’S GET YOU COVERED
- TECHNICAL SPECIFICATIONS
- GETTING STARTED
- USING THE HEADSET
- CONFIGURING YOUR RAZER KRAKEN V3 HYPERSENSE
- SAFETY AND MAINTENANCE
- LEGALESE
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
RAZER KRAKEN V3 HYPERSENSE PC Gaming Headset
Dive into a new dimension of immersion with the Razer Kraken V3 HyperSense— a PC gaming headset powered by haptic technology. From rumbling explosions to whizzing bullets, with the ability to feel what you hear, the time has come to embrace true multi-sensory gaming.
WHAT’S INSIDE / WHAT’S NEEDED
WHAT’S INSIDE
- ▪ Razer Kraken V3 HyperSense
- A. Adjustable padded headband
- B. Plush leatherette memory foam cushions
- C. Backlit Razer logo Powered by Razer ChromaTM RGB
- D. HyperSense button
- E. USB connector
- F. Microphone port
- G. Volume control wheel
- H. Mic mute button
- Detachable Razer™ HyperClear cardioid mic
- Important Product Information Guide
WHAT’S NEEDED
Product requirements
- Direct USB-A connection
Razer Synapse requirements
- Windows® 10 64-bit (or higher)
- Internet connection for software installation
Compatible with PC, PS4 and PS5.
LET’S GET YOU COVERED
You’ve got a great device in your hands, complete with a 2-year limited warranty coverage. Now maximize its potential and score exclusive Razer benefits by registering at razerid.razer.com
Got a question? Ask the Razer Support Team at support.razer.com
TECHNICAL SPECIFICATIONS
HEADPHONES
- Frequency response: 20 Hz – 20 kHz
- Impedance: 32 Ω @ 1 kHz
- Sensitivity: 96 dBSPL / mW@1KHz by HATS
- Drivers: Customized Dynamic 50 mm Driver
- Inner ear cup diameter: 62 mm x 42 mm
- Connection type: USB Type A
- Cable length: 2.0 m / 6.74 ft
- Approx. weight: 335 g / 0.73 lbs
- Oval ear cushions: Full-ear coverage with cooling fabric and plush leatherette, for comfort and optimized haptics
MICROPHONE
- Frequency response: 100 Hz – 10 kHz
- Signal-to-noise ratio: ≥ 60 dB
- Sensitivity (@1 kHz): -42 ± 3 dB
- Pick-up pattern: Unidirectional
ON-EARCUP CONTROLS
- Volume up and down
- Mic mute on/off toggle
- Haptics intensity levels
AUDIO USAGE
- Wired audio usage: USB Type A
- Surround sound: Only available on Windows 10 64-bit
HAPTIC DRIVERS
- 1 in each cup
- Frequency Response: 20-200Hz
- Maximum Generated Force: 4.3G
GETTING STARTED
SETTING IT UP
-
Connect the headset to any of the USB ports of your PC.
Only use a USB connection that can supply sufficient power to the Razer Kraken V3 HyperSense such as directly connecting to your computer’s USB ports or using a powered USB hub. Connecting the headset to a USB hub, switch or extender may affect the functionality of its Razer HyperSense feature. -
On your PC, right-click on the sound icon on the system tray, and then select Open Sound settings.
-
On the Sound window, set Razer Kraken V3 HyperSense as the default Output and Input device.
-
Use the Razer Synapse* app to customize your headset’s lighting for an immersive gaming experience that’s truly yours.
Install Razer Synapse when prompted or download the installer from razer.com/synapse.
ACTIVATE THX SPATIAL AUDIO
Unleash the full potential of your Razer Kraken V3 HyperSense by enabling 360°
positional audio for a natural and lifelike experience through Razer Synapse.
Only available on Windows® 10 64-bit.
USING THE HEADSET
USING THE HYPERSENSE BUTTON
With Razer HyperSense enabled, your headset will produce vibrations that flow
in the direction of different sounds with varying intensities, making you
hyper aware in your game. Simply press the HyperSense button to cycle through
Low intensity, Medium intensity, High intensity, and Disable HyperSense. A
distinct tone will be heard when cycling through its settings.
By default, this feature is enabled and set to Medium intensity. A direct or powered USB connection is required for this feature.
ADJUSTING THE VOLUME
Rotate the volume control wheel as shown to increase or decrease the volume.
USING THE RAZER HYPERCLEAR CARDIOID MIC
Plug the Razer™HyperClear cardioid mic to the headphone, then bend until it is
parallel to your mouth. Make sure the mic diaphragm is in front and the air
vent is facing away from your mouth.
USING THE MIC MUTE BUTTON
Press the mic mute button to mute or unmute the microphone.
COMFORT
We recommend stretching the headset gently apart before placing them over your
head to minimize headband stress. However, please avoid overstretching the
headset beyond its technical limits.
CONFIGURING YOUR RAZER KRAKEN V3 HYPERSENSE
Internet connection is required for installation, updates and cloud-based features. Registering for a Razer ID account is recommended, but optional. All listed features are subject to change based on the current software version, connected device(s), and supported apps and software.
SYNAPSE TAB
The Synapse tab is your default tab when you first launch Razer Synapse. This
tab allows you to navigate the Dashboard subtab.
Dashboard
The Dashboard subtab is an overview of your Razer Synapse where you can access
all your Razer devices, modules, and online services.
Modules
The Modules subtab displays all installed and available modules for
installation.
Global Shortcuts
Bind operations or Razer Synapse functions to custom key-combinations from any
Razer Synapse-enabled device inputs which apply across all device profiles.
Learn more about Profiles
Only Razer Synapse-enabled device inputs will be recognized.
Make sure to select THX Spatial Audio as your default playback or output device from the Sound icon on the system tray.
The Audio tab is the main tab for your Razer Kraken V3 HyperSense. From here, you can customize your device’s settings to unleash its full potential. Changes made under this tab are automatically saved to your system and cloud storage.
Sound
The Sound subtab is for adjusting the overall system volume or individual
volume of all active applications, changing the default fallback device, and
accessing Windows Sound properties.
Profile
Profile is a data storage for keeping all your Razer peripheral’s settings. By
default, the profile name is based on your system’s name. To add, rename,
duplicate, or delete a profile, simply press the Miscellaneous button ( ).
Volume
Adjust the audio volume of the device. You may also access the Windows volume
mixer of the current playback device where you can proportionally adjust the
overall volume of the system or individually adjust the volume of each active
application.
Haptic Intensity
Change the intensity of the vibrations produced by the headset.
Sound Properties
Set a default output device that the THX Spatial Audio will use when the Razer
Kraken V3 HyperSense is not connected. You may also click on the Windows Sound
Properties link to manage the sound settings of your system such as modifying
the playback and recording device settings, sound scheme and default
communications activity.
Mixer
The Mixer subtab allows you to enable or disable the THX Spatial Audio and its
settings, as well as calibrate the audio positioning of all virtual speakers
of the active spatial audio mode.
THX Spatial Audio
THX Spatial Audio technology is an advanced positional audio solution that
delivers a heightened, immersive experience as you game.
Toggle this setting to enable or disable THX Spatial Audio and its settings.
By default, this is set to Auto where all applications will use the
recommended output setting. Using Manual will allow you to assign preferred
spatial audio modes to specific application types and/or applications.
Spatial Audio Modes
Preview the calibration of each available spatial audio mode preset using the
Listen button. Changing the position of any virtual speaker (in any preset
mode) will automatically create a Custom Mode. Alternatively, you may also
click on the Add button ( + ) to create a new Custom Mode.
On any Custom Mode, click on the miscellaneous button ( ) to rename, duplicate, or delete the selected custom mode. To revert the current mode to its original settings, click on the Reset button.
Enhancement
The Enhancement subtab is for customizing the incoming audio settings and
frequency response of your audio system.
Bass Boost
Enhances the low frequency response to improve the bass output of your headset
Sound Normalization
Reduces the loudest audio received to avoid sudden and unpleasant increase in
volume from effects such as shouting or explosions.
Voice Clarity
Enhances the quality of incoming voice conversations by filtering the sound to
improve its clarity and volume.
Audio Equalizer
Select any of the available equalizer presets created for the best audio
experience designed for balance, gaming immersion, movie viewing, or enjoying
your favorite music. Manually adjusting any equalizer preset will
automatically set it to Custom.
Mic
The Mic subtab enables you to change the settings for all outgoing mic audio.
Microphone
Control the mic volume and amount of mic input for a clearer mic audio.
Mic Volume
Adjust the microphone input or mute the mic.
Voice Gate
Control the amount of mic input so that it cuts out background noises and
isolates your voice. Any sound that registers below the threshold will be
muted.
Enhancements
Improve the quality of the microphone by enabling any of the listed features
below:
- Volume Normalization. Reduces the variation of loudness.
- Vocal Clarity. Emphasizes the voice frequency.
- Ambient Noise Reduction. Decreases environmental noise.
Mic Equalizer
Select any of the available mic equalizer presets which best fits your mic
needs. Manually adjusting any equalizer preset will automatically set it as a
Custom preset.
Mic Monitoring (Sidetone)
Enable this setting to monitor the microphone’s raw audio input through the
headset with an additional option to increase or decrease the audio monitoring
volume.
Lighting
The Lighting subtab enables you to modify your Razer device’s light settings.
Brightness
You can turn off your Razer device’s lighting by toggling the Brightness
option or increase/decrease the luminance using the slider.
Switch Off Lighting
This is a power saving tool which allows you to disable your device’s lighting
in response to your system’s display turning off.
Quick Effects
A number of quick effects can be selected and applied to your device’s
lighting, as listed here:
If you have other supported Razer Chroma-enabled devices, you can synchronize their quick effects with your Razer device by clicking the Chroma Sync button ( ).
Only devices that support the selected lighting effect will synchronize.
Advanced Effects
The Advanced Effects option allows you to choose a Chroma Effect you want to
use on your Razer Chroma-enabled peripheral. To start making your own Chroma
Effect, simply press the Chroma Studio button ( ).
PROFILES TAB
The Profiles tab is a convenient way of managing all your profiles and linking
them to your games and applications.
Devices
View which games are linked to each device’s profiles or which Chroma Effect
is linked to specific games using the Devices subtab.
You can import Profiles from your computer or from the cloud through the import button ( ) or create new profiles within the selected device using the add button ( + ). To rename, duplicate, export, or delete a profile, simply press the Miscellaneous button ( ). Each profile can be set to automatically activate when you run an application using the Linked Games option.
Linked Games
The Linked Games subtab gives you the flexibility to add games, view devices
that are linked to games, or search for added games. You can also sort games
based on alphabetical order, last played, or most played. Added games will
still be listed here even if it is not linked to a Razer device.
To link games to connected Razer devices or Chroma Effects, simply click on any game from the list, and then click Select a device and its profile to launch automatically during gameplay to select the Razer device or Chroma Effect it will link with. Once linked, you may click on the Miscellaneous button ( ) of the corresponding Chroma Effect or device to select a specific Chroma Effect or profile.
SETTINGS WINDOW
The Settings window, accessible by clicking the ( ) button on Razer Synapse,
enables you to configure the startup behavior and display language of Razer
Synapse, view the master guides of each connected Razer device, or perform
factory reset on any connected Razer device.
General tab
The default tab of the Settings window. The General tab enables you to change
the software’s display language, start-up behavior, display theme, and on-
screen notifications display. You may also manually sync your profiles to the
cloud ( ) or view the master guide of all connected Razer devices and
installed modules.
Reset tab
The Reset tab allows you to perform a factory reset on all connected Razer
devices with on-board memory and/or reset Razer Synapse tutorials to acquaint
yourself again with Razer Synapse’s new features on its next launch.
By resetting a Razer device, all profiles stored on the selected device’s on- board memory will be erased.
About tab
The About tab displays brief software information, copyright statement and
provides relevant links for its terms of use. You may also use this tab to
check for software updates, or as a quick access to Razer’s social
communities.
SAFETY AND MAINTENANCE
SAFETY GUIDELINES
In order to achieve maximum safety while using your Razer Kraken V3
HyperSense, we suggest that you adopt the following guidelines:
Should you have trouble operating the device properly and troubleshooting does
not work, unplug the device and contact the Razer hotline or go to
support.razer.com for assistance.
Do not take apart the device and do not attempt to operate it under abnormal
current loads. Doing so will void your warranty.
Keep the device away from liquid, humidity or moisture. Operate the device
only within the specific temperature range of 0°C (32°F) to 40°C (104°F).
Should the temperature exceed this range, unplug the device in order to let
the temperature stabilize to an optimal level.
The device isolates external ambient sounds even at low volumes, resulting in
lowered awareness of your external surroundings. Please remove the device when
engaging in any activities that requires active awareness of your
surroundings.
Listening to excessively loud volumes over extended periods of time can damage
your hearing. Furthermore, legislation of certain countries permits a maximum
sound level of 86db to affect your hearing for 8 hours a day. We therefore
recommend that you reduce the volume to a comfortable level when listening for
prolonged periods of time. Please, take good care of your hearing.
MAINTENANCE AND USE
The Razer Kraken V3 HyperSense requires minimum maintenance to keep it in
optimum condition. Once a month we recommend you unplug the device and clean
it using a soft cloth or cotton swab to prevent dirt buildup. Do not use soap
or harsh cleaning agents.
LEGALESE
COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION
©2021 Razer Inc. All rights reserved. Razer, the triple-headed snake logo,
Razer logo, “For Gamers. By Gamers.” and “Razer Chroma” are trademarks or
registered trademarks of Razer Inc. and/or affiliated companies in the United
States and other countries. Actual product may differ from pictures. All other
trademarks are the property of their respective owners. Warranty not valid
outside of product’s intended region.
Windows and the Windows logo are trademarks or registered trademarks of the
Microsoft group of companies.
Razer Inc. (“Razer”) may have copyright, trademarks, trade secrets, patents,
patent applications, or other intellectual property rights (whether registered
or unregistered) concerning the product in this guide. Furnishing of this
guide does not give you a license to any such copyright, trademark, patent or
other intellectual property right. The Razer Kraken V3 HyperSense (the
“Product”) may differ from pictures whether on packaging or otherwise. Razer
assumes no responsibility for such differences or for any errors that may
appear. Information contained herein is subject to change without notice.
LIMITED PRODUCT WARRANTY
For the latest and current terms of the Limited Product Warranty, please visit
razer.com/warranty.
LIMITATION OF LIABILITY
Razer shall in no event be liable for any lost profits, loss of information or
data, special, incidental, indirect, punitive or consequential or incidental
damages, arising in any way out of distribution of, sale of, resale of, use
of, or inability to use the Product. In no event shall Razer’s liability
exceed the retail purchase price of the Product.
GENERAL
These terms shall be governed by and construed under the laws of the
jurisdiction in which the Product was purchased. If any term herein is held to
be invalid or unenforceable, then such term (in so far as it is invalid or
unenforceable) shall be given no effect and deemed to be excluded without
invalidating any of the remaining terms. Razer reserves the right to amend any
term at any time without notice.
References
- Razer Synapse 3 - Cloud-Based Hardware Configuration Tool | Razer United States | Razer United States
- Razer Warranty Policy | Razer United States
- Razer ID
- support.razer.com
- support.razer.com/
- Razer ID
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>