lite source LS-83562BLK LED Portable Lamp User Manual
- June 9, 2024
- lite source
Table of Contents
lite source LS-83562BLK LED Portable Lamp
WARNING: To avoid serious personal injury:
- Carefully and strictly follow assembly instructions. Improper assembly of furniture can result in structural failure, instability of the product, or tip-over
- Monitor and carefully control the assembly components. These include small parts and hardware that may present a choking hazard to small children. Bob’s furniture should be assembled only by responsible adults and children should not be involved in the assembly process.
- Where provided, wall mounting hardware should always be used as prescribed in these instructions to anchor furniture to walls. Proper use of the wall mounting hardware can significantly reduce the potential for furniture tip-over and crushing injuries.
COMPONENT LIST
ASSEMBLY INSTRUCTIONS
- Carefully unpack and place all lamp parts on a flat surface.
- Screw column (B) into the base (A)
- Place the wooden (D) onto column (B) , adjusts th e hole of the wooden (D) and the hole of column (B) in order, and tighten it with screw (G).
- Connect the lamp body (E) to column (B).
- Connect the power cord to the adapter.
- Plug into the outlet turn on the switch and enjoy.
Remark
- Lamp:3000K,819 lm, RA 80
- Features: wireless charging,USB charging port
- dimmable LED & replaceable LED
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits f or a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a res-identical installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfere enc e by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
FCC Radia tion Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding the
FCC radio frequency exposure limits, Human proximity to the antenna shall not
be less than 20cm(8 inches)during normal operation. That changes or
modifications not expressly approved by the party responsible for compliance
could void the use r’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>