BHS QCS605 AI Box Edge Computing Device User Manual

QCS605 AI Box Edge Computing Device
User Manual

USER MANUAL QCS605 AI BOX

QCS605 AI Box Edge Computing Device

Dimensions

Physical Description

1. Outer View

2. Mode Button
   Mode button is used in this device is tactile switches type, user-developed operating script.

3. Reset Button
   The reset button is used to factory reset the device.
   Reset procedure: Unplug the Box B01 -> Hold down the reset button -> Plug in the power -> Continue to hold for about 10 seconds and then release it -> Box will  perform a factory reset and boot up at the Google Setup Wizard screen

4. USB Type C
   One port USB Type C 3.1 is available in this device for debug and flashing images.

5. HDMI
   One port HDMI 1.4 Type A is available in this device for transmitting images, videos to external devices such as monitors.

6. Alarm I/O (DI/DO terminal)
   Various I/O supports including Alarm-in, Alarm-out (Relay).

Two alarm outputs with NO contacts of IM06GR (TE) relay:
• Switching power: 60W/62.5VA
• Switching voltage: 220VDC/250VAC
• Switching current: 2A
Two alarm inputs can support input voltage level are 5VDC to 12VDC.

7. LEDs
   System Power  Green LED| Power is ON/OFF
   ---|---
   Status RG LED| User-developed operating script.
   LAN RG  LED| User-developed operating script.

8. SD Card
   QCS605 supports Micro SD Card up to 2TB.

9. Hardware Installation.
   1. Install the dual Wifi Antenna.![BHS QCS605 AI Box Edge Computing Device

• Wifi Antenna](https://manuals.plus/wp-content/uploads/2023/03/BHS-QCS605-AI- Box-Edge-Computing-Device-Wifi-Antenna.png) 2. Install the GPS Antenna.
  3. Install Mic, Audio, USB Type-C, Micro HDMI
  4. Install SD Card.5. Install DI/DO
  a. Install Terminal connector.

b. Installing Cable DI/DO to block terminal. Then, to use Screwdriver fix the cable.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>