BOSCH T10 Cabin Filters Installation Guide
- June 9, 2024
- Bosch
Table of Contents
BOSCH T10 Cabin Filters Installation Guide
This manual describes how to replace the cabin filter. Before installing, please be sure to read this book to ensure safe and correct installation.
Estimated Installation Time: 5-10 minutes
In some cases, tools are required and replacement work adds additional time.
Recommended replacement time
1 year or 10,000km
However, it is recommended to check and replace your cabin filter as soon as possible when driving in heavily soiled areas.
The contents of this installation guide are accurate as of May 2022
Precautions for installation and use
- Be sure to park your vehicle in a safe place with the engine and air conditioner turned off before commencing the replacement process.
- When replacing your cabin filter, please refer to the instruction manual of the vehicle, maintenance manual, etc.
- This guide is just an example and may differ from the actual vehicle.
- Please refrain from unreasonable work. It may result in damaging the vehicle or personal injury.
- If you are not confident in the work please consult your local workshop.
- Check the direction of the arrow so that you do not mistake the front and back of the filter when installing.
- This product displays AIR FLOW (wind direction) with an arrow, but other companies may display “TOP UP” on their filters.
S03 Cabin Filter Installation Guide
Type 1
1. Removing the glove box
- Open the glove box, press from both sides to remove the pins (2 places)
- Remove the glove box
1. For vehicles with a damper, pull the damper from the claws before removing the glove box
2. Removing your old cabin filter
- Pinch the hook on the left side of the filter cover
- Remove the filter cover
3. Installing your Bosch cabin filter
- Pull the old filter towards yourself to remove it
- Insert the Bosch cabin filter with the “AIR FLOW” arrow pointing down
- Restore the removed vehicle parts to their original positions
Type 2
2. Removing the old cabin filter
3. Installing your Bosch cabin filter
- Insert the Bosch cabin filter with the “AIR FLOW” arrow pointing down
- Restore the removed vehicle parts to their original positions
Attention
- This work procedure is an example and may vary across different vehicles.
- Bosch’s cabin filter indicates airflow with an arrow on the product. Please note that the arrow may indicate “TOP” on other genuine or IAM products.
- Please read the “Precautions for installation and use” on the installation guide cover before commencing.
- NOTE: used cabin filters cannot be cleaned and reused.
Robert Bosch (Australia) Pty. Ltd.
1555 Centre Road
Clayton VIC 3168
For Further information please contact Bosch on:
Email: CustomerService.AA@au.bosch.com
Australia: 1300 307 040
www.boschaftermarket.com.au
New Zealand 0800 452 896
www.boschaftermarket.co.nz
References
- Invented for life | Bosch Global
- Home | Bosch Mobility Aftermarket in Australia and New Zealand
- Home | Bosch Mobility Aftermarket in Australia and New Zealand