TICA Air Conditioner Remote Controller User Guide
- June 9, 2024
- TICA
Table of Contents
TICA Air Conditioner Remote Controller User Guide
No. 6, Hengye Road, Nanjing Economic and Technological Development Zone, Nanjing, Jiangsu, China
Postal code: 210046
http://www.ticachina.com
Service hotline: 4008-601-601
– Service quality supervision hotline of the HQ: 86-25-85326977
Customer service email: tica@ticachina.com
NANJING TICA CLIMATE SOLUTIONS CO., LTD.
Dear users,
Thank you for purchasing and using a TICA air-conditioner remote controller
and trusting us. We are dedicated to creating a comfortable and healthy life
for you. Please give us your feedback because it is very important to us.
Before using the remote controller, please carefully read this guide and keep
it well. TICA is devoted to product improvement and the product is subject to
change without prior notice.
Precautions
-
Important notes
• TICA is devoted to product improvement and tie product is subject to change without prior notice.
• TICA is not responsible for the contingent damages when the product is operating in a specific environment.
• Any part of this guide cannot be reproduced without permission. -
Checking arrivals
• After receiving the remote controller, check whether it is damaged during transportation. Inform the transportation company in writing immediately about any damage on the surface or inside.
• Check accessories against the Packing List.
This guide describes how to use the remote controller.
Using the remote controller in the conditions beyond this guide is not recommended.
-
Please contact the local agent if any problem arises.
TICA shall not be responsible for the product change without written consent from TICA. -
Operating the remote controller by wet hands or pouring water on it is prohibited. Because the product contains electrical components, water may result in serious electric shock or short circuit.
-
Never use pesticide, paint, fixature or other toxic gas within one meter around the remote controller.
Maintenance
Maintenance and after-sales service
-
Use a dry and soft cloth to remove the dirt on the LCD screen or controller body. If the dirt cannot be removed, use water to dilute neutral detergent, dip the cloth in
the diluted detergent, and then wring it out. Use the cloth to remove the dirt. After the dirt is removed, use a dry cloth to wipe the LCD screen or controller body.
Do not use diluent, organic solvent, strong acid, and so on. -
For the after-sales service, contact your sales service provider. NANJING TICA CLIMATE SOLUTIONS CO., LTD.