NOTIFIER AFP-400 External Programming Utility Instruction Manual
- June 9, 2024
- NOTIFIER
Table of Contents
NOTIFIER AFP-400 External Programming Utility
AFP-400 External Programming Utility
PRODUCT INSTALLATION DRAWING
Document 50376 Rev A Part Number 50376-A2
ECN 99-099 3/1/99
Overview
The VeriŁFire 400 Off Line Programming Utility lets you load or download programs between the PC and the control panel. This document contains instructions for installing the VeriŁFire 400 external programming kit:
- connecting a PC to the AFP-300 or AFP-400
- installing the VeriŁFire 400 program.
Minimum System Requirements
Minimum system requirements are a personal computer (processor 386 and up) with the following:
- 4MB RAM with a fixed disk
- Windows 3.1 or higher
- VGA monitor
Programming Kit
The VeriŁFire 400 programming kit contains the following.
Item: Quantity
- VeririFire 400 program disks 1 Set
- Upload/Download cable (75267) 1 (Cable not in upgrade version)
Installation
For instructions on using the VeriŁFire program, refer to the on-line help
utility.
If using a modem, reverse the black and green wires on the Upload/Download
cable.
Install the VeriFire 400 external programming kit as follows:
External Programming Connections for the AFP-400/AFP-300
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>