suinsist T11C Pro Smart Watch User Guide
- June 9, 2024
- suinsist
Table of Contents
T11C Pro Smart Watch
User Guide
Instruction for Quick Use
Introduction to Parts
How to charge?
Please take the smart watch out in first charge, and charge by corresponding
charger (charging method: as shown in below diagram, please place the smart
watch in charger, align two touch points of charger, to charge).
Wearing method
- The watch is best worn behind the ulna styloid process;
- Adjust its size according to adjustment holes, and fasten the wristband buckle;
- Sensor should be close to skin, avoiding to be moved
Notices in monitoring heart rate:
- LED light of heart rate on the smart watch back flashes;
- Sensor should be close to skin, avoiding the external light to affect the accuracy of test ;
- Please keep clean in testing area, sweat or blot may affect test results.
On/off
- When the bracelet is turned off, charge or press and hold for 3 seconds to start the bracelet vibrating;
- When the bracelet is turned on, switch to the shutdown interface or press and hold the button for 3 seconds, and the shutdown interface will pop up to confirm the shutdown.
Band Operation
- When the watch is turned on, raise your hand or press the button to wake up the watch, and slide to switch the interface.
- The default screen time is 10 seconds without any operation, and the user can modify the screen time on the APP or watch;
- The 24-hour heart rate monitoring is turned on by default on the bracelet, and the user can choose to turn it on or off in the general settings of the APP device interface.
Basic parameters
Equipment | Call smart watch | Battery Type | Polymer battery |
---|---|---|---|
Display Screen | 1.85″ IPS color screen | Battery Capacity | 260 mah |
Touch Screen | Full touch screen | Product weight | 42 g |
CPU | RTL8763E | Packing List | Device, manual, Magnet charging cable |
Waterproof | 1P68 | Strap material | TPU |
How to install APP
Scan the following QR code or download and install ‘Glory Fit’ in application
markets.
Demands on Device: IOS 9.0 or above; Android 4.4 or above, Bluetooth 5.0 is
supported
https://app.help-document.com/gloryfit/download/index.html
Connect with device
Chip upgrade, replacing the previous dual Bluetooth connection, only need to
connect once to the Bluetooth, simpler operation connection more stable
The time and date of the watch are synchronized through Bluetooth and cell
phone connection, if disconnected from the phone for a long time the time of
the watch may change, just reconnect with the phone to correct the time of the
watch
We have recorded a video for you on how t o connect, you can watch it on
YouTube by scanning the code.
APP Device Interface
Device Interface
| Sync contacts to watch
---|---
| Download Cloud Dial/Upload Photo for Dial
| Automatic heart rate monitoring switch
| Blood sample automatic monitoring switch
| Set watch call alert
| Set watch SMS alert
| All APP information push switch
| Sedentary reminder switch
| Tum off or on the shake your wrist t o light up the screen
| Set the watch no-disturb function
| (Control photo/find phone/watch language )
| System Upgrade
| Restore factory settings
| Unbinding
the watch
Bluetooth Call
Sync your phone contacts to your watch
Watch face
Download the cloud dial or upload your favorite photo as the watch dial from
here
Heart rate settings
The watch can manually tum on the heart rate monitoring or automatically
monitor the heart rate every other time period, when you tum on the automatic
heart rate monitoring watch will increase power consumption
Blood oxygen setting
The watch can manually tum on the blood oxygen monitoring or automatically
monitor the blood oxygen every time period, when you tum on the blood oxygen
automatic monitoring watch will increase the power consumption
Phone
When a call comes in from the phone, you can choose to be alerted or not to be
alerted on the watch, and the watch will vibrate when you choose to be alerted
after the call
Sms
When your phone receives a text message, you can choose to be alerted on the
watch or not, when you choose to be alerted, the watch will vibrate when you
receive the text message
APP
All the social apps (Twitter, Facebook, YouTube, etc.) in your phone,
including the news push from your browser, can choose to be alerted or not to
be alerted on your watch, when you choose to be alerted, the watch will
vibrate when these apps receive notifications, and the power consumption of
the watch will increase when you turn on all the alerts, so it is recommended
that you turn on some important alerts instead of turning on all of them.
Sedentary reminder
When you are too busy at work, you will be sitting on the chair for a long
time which is not good for your health, so this is a very friendly function,
you can turn on this sedentary reminder function and set the time to your work
time, if you turn on the sedentary reminder function without setting the time
period then the watch will remind you every one hour all day long which will
disturb your rest.
Light up
The watch screen can be set to light up manually or automatically when you
shake your wrist. When you choose to shake your wrist to light up the screen,
the watch screen will light up when you turn over at night, which will disturb
your rest, but don’t worry, when you turn on the shake wrist to light up the
screen you must set a time period in the no-disturbance section to turn off
the shake wrist to light up the screen during the time you sleep at night.
Do not disturb
When you turn on the incoming call reminder, incoming message reminder,
various social apps reminder, sedentary reminder, shaking your wrist to light
up the screen, the watch will vibrate whenever your phone receives a text
message or phone call, which will disturb your rest when you are resting, so
you can set a time period in the no-disturb setting to turn off all vibration
alerts when you are resting.
More setting
From here, open the photo control, find the watch, bright screen length,
military time, watch language setting (the default language is English when
the watch is turned on)
Firmware update
Glory fit system upgrade
Reset device
Delete the watch settings and all the data synced in the phone
Unpair
Unbind the watch and Glory Fit. If you need to unbind, delete T11C from the
Bluetooth list of your phone at the same time. The time and date of the watch
will change if the Bluetooth connection between the watch and mobile phone is
disconnected for a long time. Don’t worry about the time and date of
connecting the watch and mobile phone to the watch via Bluetooth again
APP Home Interface
When the watch and phone are connected via Bluetooth, the watch monitoring data (sleep monitoring, heart rate monitoring, blood oxygen monitoring) is synced to Glory Fit and can be seen from the main screen here. You can also click on it to see the date specific data
APP Sport Interface
APP Profile Interface
Login
There are four login options. Gender must be filled in
Setting
Unit system conversion (height, weight, temperature)
Help
Some common operating tips
Function
Long press the dial interface left and right swipe to switch dials
Swipe up on the main screen to view message pushes
Swipe down the main screen to see the shortcut settings
Swipe left on the main screen to access the feature options
Swipe the main screen to the right to access the full list of features
|
---|---
huihoujie@outlook.com|
https://www.youtube.com/playlist?list=PL5CbVs8KDjw_jyQL17CeI9MzQHCuE6Vgj
VERSION: 01
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>