BLUESTREAM 2 U Custom Pro Matrix Hub CUSTOMPRO-HUB User Manual

: June 9, 2024
: BLUESTREAM

Table of Contents

2 U Custom Pro Matrix Hub CUSTOMPRO-HUB
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

2 U Custom Pro Matrix Hub CUSTOMPRO-HUB

Custom Pro Matrix
User Manual

CUSTOMPRO

RevA5_Custom_Pro_Matrix_User_Manual

Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please save / keep this manual for future reference.
Surge Protection Device Recommended
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment.
Safety & Performance Notice
The transmission distances of HDMI over UTP cables are measured using TE CONNECTIVITY 1427071-6 EIA/TIA-568-B termination (T568B) of cables is recommended for optimal performance. To minimise interference of the unshielded twisted pairs in the CAT5e/6/6a cable do not run the
HDBaseTTM / CAT5e/6/6a cabling with
or in close parallel proximity to mains power cables. Do not substitute or use any other power supply other than the enclosed unit, or a Blustream approved replacement. Do not disassemble either the Transmitter or Receiver units for any reason. Doing so will void the manufacturer’s warranty.
02

Contents

CUSTOM PRO MATRIX USER MANUAL

Introduction & Key Features Modular Matrix Options Overview Panel Descriptions – 8×8 Chassis Panel Descriptions – 16×16 Chassis Modular Options – Main Communication Board Modular Options – Input Boards Modular Options – Output Boards Automatic Smart Scaling Functionality in CSC Modular Options – Feature Boards Installing Modular Matrix Boards HDBaseTTM Transmitter & Receiver Options Matrix Front Panel Control Advanced EDID Management Terminating CAT Cables for use with HDBaseTTM Understanding the HDBaseTTM Status LED’s Audio Functionality Infrared Distribution Infrared Control Example Schematic – 8×8 Chassis Example Schematic – 16×16 Chassis Specifications, Package Contents & Maintenance Infrared Commands – 8×8 Matrix Infrared Commands – 16×16 Matrix RS-232 and Telnet Commands Certifications Notes

03 03 04 05 06 07 – 08 09 – 11 11 12 13 14 15 16 16 17 18 19 20 21 22 23 24 – 25 26 – 27 38 – 30 31 32

www.blustream.co.uk | www.blustream.com.au

CUSTOM PRO MATRIX USER MANUAL
Introduction
The Blustream Custom Pro matrix series achieves new levels of performance and flexibility. AV installers can now easily specify their desired I/O structure and choose the additional control features required for a specific project. The Custom Pro matrix chassis’ have been specifically designed to operate in challenging AV environments. The robust housing and interlocking board configuration make both installation and maintenance a seamless experience. Advanced features include audio breakout, IR routing, HDBaseTTM inputs, simultaneous HDBaseTTM / HDMI outputs, RS232 pass through and a web browser interface module for control and configuration of the matrix (subject to I/O card specification).
Key Features
· 2-way and 4-way interchangeable input & output boards · Optional control boards: IR routing (8×8 chassis only), zone audio breakout, RS-232 pass- through to supported
HDBaseTTM receivers · Supports 4K UHD video up to 70m (4K @60Hz 4:4:4) and up to 100m 1080p using HDBaseTTM distribution for all 2nd
generation HDMI2.0 and HDBaseTTM CSC input / output boards (subject to output board specifications) · Web browser interface for control and configuration of the matrix · Control via front panel, IR, RS-232, TCP/IP, and iOS / Android apps (search: `Blustream Matrix’) · Supports PoC (Power over Cable) to power compatible HDBaseTTM receivers · 3rd party drivers available for major control brands – refer to Blustream website for more details · Advanced EDID management · HDCP 2.2 compliant

Modular Matrix Options Overview

The Custom Pro series allows AV integrators to easily specify their desired input / output structure, choosing the additional control features as required for a specific project. The available modular board options are shown below:

Chassis CUSTOMPRO-HUB CUSTOMPRO-HUB16

Custom Pro Matrix Hub (8×8) Custom Pro Matrix Hub (16×16)

Feature & Control Boards

PRO-8IR*

8-Way IR Control Board (5V IR only)

PRO-8IR-V2*

8-Way IR Control Board w. 5V & 12V IR

PRO-8RS232

8-Way RS-232 Breakout Board

PRO-8AB

8-Way Audio Breakout Board

PRO-8AB-V2

8-Way Audio Breakout Board w. LL Volume

18Gbps Video Input Boards (4K 60Hz 4:4:4)

PRO-IN2HAB

2-Way HDMI 2.0 Input Board w. Audio B/O

PRO-IN4HAB

4-Way HDMI 2.0 Input Board w. Audio B/O

PRO-IN2H2V

4-Way HDMI 2.0 & VGA Input Board

PRO-IN2H2TCS 2-Way HDBaseTTM & HDMI 2.0 Input Board

18Gbps Video Output Boards (4K 60Hz 4:4:4)

PRO-OUT2H-V2 2-Way HDMI 2.0 Output Board

PRO-OUT4H-V2 4-Way HDMI 2.0 Output Board

PRO-OUT2TCS

2-Way HDBaseTTM CSC Output Board (100m 1080p)

PRO-OUT4TCS

4-Way HDBaseTTM CSC Output Board (100m 1080p)

PRO-OUT4HTCS

4-Way HDBaseTTM CSC / HDMI Output Board (100m 1080p)

PRO-OUT2TL-V2 2-Way HDBaseTTM CSC Output Board (70m 1080p)

PRO-OUT4TL-V2 4-Way HDBaseTTM CSC Output Board (70m 1080p) PRO-OUT4TLS-V2 4-Way HDBaseTTM CSC / HDMI Output Board (70m 1080p)

IR control boards are included within the CUSTOMPRO-HUB16

Please note that the legacy (HDMI1.4, HDBaseTTM 4K 60Hz 4:2:0) Custom Pro input and output boards are not included within this user guide. Please contact your authorised Blustream distributor or reseller for further information.

contact support@blustream.co.uk | support@blustream.com.au

CUSTOM PRO MATRIX USER MANUAL

Panel Descriptions – 8×8 Chassis

Front Panel

1 LCD display – shows the status of input / output selection, EDID etc.
2 IR receiver window
3 Input / output selection buttons – select output number first followed by the input to be viewed
4 Up / Down / Left / Right selection buttons – for use when navigating through matrix menu

87
5 Menu button – press to enter menu structure – see page 15 for more details
6 Power button – press and hold for 2 seconds to power off
7 Exit / Cancel button – return to last menu page / exit to main display page
8 Enter / Confirm button

Rear Panel

89
1 TCP/IP port – for control of the matrix from PC or third party control processor
2 RS-232 / serial connector – for control of the matrix (as above)
3 Analogue L/R line level input (3.5mm stereo jack) audio can be embedded onto video inputs
4 RS-232 control card slots – insert optional RS-232 control cards for serial control at HDBaseTTM receivers
5 Audio output card slot – insert optional audio card for zone / output audio breakout
6 IR control card slot – insert optional IR control card for 2-way & Global IR control

7 Mains power switch
8 Video input card 1 (inputs 1-4) – insert video input card to connect to source devices (mandatory)
9 Video input card 2 (inputs 5-8) – insert video input card to connect to source devices (optional)
q Video output card 1 (outputs 1-4) – insert video output card (mandatory)
w Video output card 2 (outputs 5-8) – insert video output card (optional)
e Power port use supplied 24V 8A DC adaptor to power matrix

www.blustream.co.uk | www.blustream.com.au

CUSTOM PRO MATRIX USER MANUAL

Panel Descriptions – 16×16 Chassis

Front Panel – touch panel shown only for illustrative purposes

1 LCD display – shows the status of input / output selection, EDID etc.
2 IR receiver window
3 Input / output selection buttons – select output number first (up to 2 digits), followed by enter, then input number
4 Up / Down / Left / Right selection buttons

Rear Panel 12

87
5 Menu button -press to enter menu structure – see page 15 for more details
6 Power button – press and hold for 2 seconds to power off
7 Exit / Cancel button- return to last menu page / exit to main display page
8 Enter / Confirm button

8
1 TCP/IP port – for control of the Matrix from PC or third party control processor
2 RS-232 / serial connector – for control of the matrix (as above)
3 Analogue L/R line level inputs (3.5mm stereo jack) Audio can be embedded onto video outputs
4 RS-232 control card slots – insert optional RS-232 control cards for serial control at HDBaseTTM receivers
5 Audio output card slots – insert optional audio cards for zone / output audio breakout
contact support@blustream.co.uk | support@blustream.com.au

6 IR control card slots – IR control card for 2-way & Global IR control (supplied within 16×16 chassis)
7 Mains power switch
8 Video input card slots 1-4 (inputs 1-16) – insert video input cards to connect to source devices (input card slot 1 mandatory; 2-4 optional)
9 Video output card slots 1-4 (outputs 1-16) – insert video output cards (output card slot 1 mandatory; 2-4 optional)
q Power port use supplied IEC cable to power matrix

CUSTOM PRO MATRIX USER MANUAL
Custom Pro Matrix Modular Options
Each of the Custom Pro modular boards feature quick release card module fittings allowing simple installation into the Custom Pro matrix chassis.
The following pages list the Custom Pro modular board options available for both chassis.
Matrix Communication Board Both Blustream Custom Pro matrix chassis’ include a web browser interface module for control and configuration of the matrix, RS-232 for 3rd party control, as well as analogue audio embedding per zone. The Matrix Communication Board is supplied as standard with both Custom Pro chassis’, the second communication board with 8 x L/R Audio inputs is supplied within the 16×16 chassis as standard.

1 TCP/IP for control of matrix (RJ45 connector) 2 RS-232 – 2-way (DB9) for 3rd party control of matrix 3 L/R 2ch analogue audio input – embeds and replaces the associated video input audio signal

TCP/IP
The Blustream matrix can be fully controlled via TCP/IP. For a full list of protocols please see RS-232 & Telnet Commands’ located at the rear of this manual. Astraight-through’ RJ45 patch lead should be used.

RS-232
The Blustream matrix can be controlled via the 9-pin serial connection. For details of RS-232 pin assignment, communication, and a full list of protocols please see `RS-232 & Telnet Commands’ located at the rear of this manual.

www.blustream.co.uk | www.blustream.com.au

CUSTOM PRO MATRIX USER MANUAL
Web GUI Custom configuration of the matrix can be achieved using the matrix web-GUI interface. By default, the matrix is set to DHCP so will automatically obtain an IP address based on your routers configuration. If you are unsure of the IP address of the Custom Pro matrix you can use the front panel menu to report the IP address of the unit. See page 15 for more details. If not connected to a local network, a direct connection is to be made to the matrix from a PC using a straight RJ45 CAT network patch cable. When the matrix is not assigned an IP address by a router, the default IP address will be 192.168.0.200. Default login details are:
Username: admin Password: 1234 For further details and instructions on using the matrix web-GUI, please download the Blustream `Web GUI & App Interface Guide’ from the Blustream website.
Custom Pro Matrix Input Boards
PRO-IN4HAB – 4-Way HDMI 2.0 Input Board with Source Audio Breakout (4K 60Hz 4:4:4 – 18Gbps) · 4 x HDMI 2.0, female · L/R 3.5mm stereo jack audio breakouts – allow for 2ch source audio to be sent to separate audio distribution
system. Please Note: audio breakout does not down-mix multichannel audio to 2ch.

IN4HAB

HDMI In 1

L/R

HDMI In 2

L/R

1 HDMI Inputs 2 L/R 3.5mm stereo audio breakout

HDMI In 3

L/R

HDMI In 4

L/R

PRO-IN2HAB – 2-Way HDMI 2.0 Input Board with Source Audio Breakout (4K 60Hz 4:4:4 – 18Gbps)
· 2 x HDMI 2.0, female · L/R 3.5mm stereo jack audio breakouts – allow for 2ch source audio to be sent to separate audio distribution
system. Please Note: audio breakout does not down-mix multichannel audio to 2ch.

IN2HAB

HDMI In 1 CoaLx/.ROut 1

HDMI In 2 CoaLx/.ROut 2

1 HDMI Inputs 2 L/R 3.5mm stereo audio breakout

contact support@blustream.co.uk | support@blustream.com.au

Custom Pro Matrix Input Boards

CUSTOM PRO MATRIX USER MANUAL

PRO-IN2H2V – 4-Way VGA & HDMI 2.0 Input Board (4K 60Hz 4:4:4 – 18Gbps / WUXGA) · 2 x HDMI 2.0, female · 2 x VGA, DB15 – VGA signals up to 1920×1200 (WUXGA) @60Hz supported and converted within the card to
1920×1080 at the same refresh rate as the native signal.
Please Note: the associated audio inputs for the VGA connections are the L/R inputs on the matrix communication board (supplied within chassis).

1 VGA Inputs 2 HDMI Inputs

PRO-IN2H2TCS – 4-Way CSC HDBaseTTM & HDMI 2.0 Input Board (4K 60Hz 4:4:4 – 18Gbps)
· 2 x CSC HDBaseTTM, RJ45 · 2 x HDMI 2.0, female · Supports 70m at 4K 60Hz 4:4:4, or 100m at 1080p when used with the HEX100CS-TX (sold separately) · HEX70CS-TX can be used where CAT cable distance is less than 40m at 4K 60Hz 4:4:4, or 70m at 1080p
Please Note: PoC (Power over Cable) is not supplied from the HDBaseTTM input ports. HEX70CS-TX or HEX100CS-TX units must be powered locally using a Blustream 12V 2A power supply (part code: PS122) which must be purchased separately.

1 23

1 HDBaseTTM Inputs (RJ45) 2 L/R 3.5mm stereo audio breakout 3 IR RX 1 – 3.5mm Mono 5V IR output for routed control of remote source hardware 4 HDMI Inputs

www.blustream.co.uk | www.blustream.com.au

CUSTOM PRO MATRIX USER MANUAL
Custom Pro Matrix Output Boards
PRO-OUT4H-V2 – 4-Way HDMI 2.0 Output Board (4K 60Hz 4:4:4 – 18Gbps) · 4 x HDMI 2.0, female
Output OUT4H-V2
1 1 HDMI Outputs
PRO-OUT2H-V2 – 2-Way HDMI 2.0 Output Board (4K 60Hz 4:4:4 – 18Gbps) · 2 x HDMI 2.0, female
Output OUT2H-V2
1 1 HDMI Outputs

PRO-OUT4HTCS – 4-Way HDBaseTTM CSC / HDMI 2.0 Output Board (4K 60Hz 4:4:4 – 18Gbps to 70m)
· 4 x HDBaseTTM CSC, RJ45 · 4 x simultaneous HDMI 2.0, female · Supports 70m at 4K 60Hz 4:4:4, or 100m at 1080p when used with the HEX100CS-RX · HEX70CS-RX can be used where CAT cable distance is less than 40m at 4K 60Hz 4:4:4, or 70m at 1080p · Supports PoC (Power over Cable) to compatible Blustream HDBaseTTM receivers

OUT4HTCS
1 HDBaseTTM PoC Outputs (RJ45) 2 HDMI Outputs

contact support@blustream.co.uk | support@blustream.com.au

CUSTOM PRO MATRIX USER MANUAL
Custom Pro Matrix Output Boards
PRO-OUT4TCS – 4-Way HDBaseTTM CSC Output Board (4K 60Hz 4:4:4 – 18Gbps to 70m) · 4 x HDBaseTTM CSC, RJ45 · Supports 70m at 4K 60Hz 4:4:4, or 100m at 1080p when used with the HEX100CS-RX · HEX70CS-RX can be used where CAT cable distance is less than 40m at 4K 60Hz 4:4:4, or 70m at 1080p · Supports PoC (Power over Cable) to compatible Blustream HDBaseTTM receivers

OUT4TCS
1 1 HDBaseTTM PoC Outputs (RJ45)
PRO-OUT2TCS – 2-Way HDBaseTTM CSC Output Board (4K 60Hz 4:4:4 – 18Gbps to 70m) · 2 x HDBaseTTM CSC, RJ45 · Supports 70m at 4K 60Hz 4:4:4, or 100m at 1080p when used with the HEX100CS-RX · HEX70CS-RX can be used where CAT cable distance is less than 40m at 4K 60Hz 4:4:4, or 70m at 1080p · Supports PoC (Power over Cable) to compatible Blustream HDBaseTTM receivers

OUT2TCS
1
1 HDBaseTTM PoC Outputs (RJ45)
PRO-OUT4TLS-V2 – 4-Way HDBaseTTM CSC / HDMI2.0 Output Board (4K 60Hz 4:4:4 – 18Gbps to 40m) · 4 x HDBaseTTM CSC, RJ45 · 4 x Simultaneous HDMI 2.0, female · Supports 40m at 4K 60Hz 4:4:4, or 70m at 1080p when used with the HEX70CS-RX · Supports PoC (Power over Cable) to compatible Blustream HDBaseTTM receivers

OUT4TTLLSS–VV22
1 HDBaseTTM PoC Outputs (RJ45) 2 HDMI Outputs

www.blustream.co.uk | www.blustream.com.au

CUSTOM PRO MATRIX USER MANUAL
Custom Pro Matrix Output Boards
PRO-OUT4TL-V2 – 4-Way HDBaseTTM CSC Output Board (4K 60Hz 4:4:4 – 18Gbps to 40m) · 4 x HDBaseTTM CSC, RJ45 · Supports 40m at 4K 60Hz 4:4:4, or 70m at 1080p when used with the HEX70CS-RX · Supports PoC (Power over Cable) to compatible Blustream HDBaseTTM receivers
OUT4TL-V2
1 1 HDBaseTTM PoC Outputs (RJ45)
PRO-OUT2TL-V2 – 2-Way HDBaseTTM CSC Output Board (4K 60Hz 4:4:4 – 18Gbps to 40m) · 2 x HDBaseTTM CSC, RJ45 · Supports 40m at 4K 60Hz 4:4:4, or 70m at 1080p when used with the HEX70CS-RX · Supports PoC (Power over Cable) to compatible Blustream HDBaseTTM receivers

OUT2TL-V2
1 1 HDBaseTTM PoC Outputs (RJ45)

Automatic Smart Scaling Functionality in CSC

Blustream HDBaseTTM CSC output boards have an in-built automatic smart scaling feature allowing for a 4K video signal to be independently downscaled per individual HDBaseTTM output connection. The output card will read the EDID of the display attached to the HDBaseTTM receiver, downscaling the video resolution automatically where the display cannot accept the native resolution being sent from the source device. CSC will auto-downscale either video resolution or chroma sampling, it is not able to amend frame rate, colour depth or HDR elements within a signal. Simultaneous HDMI outputs (where available) will continue to pass the native signal.

Smart Scaling Conversion Table

Native Source Signal

Smart Scaled Output Capability

4K xHz 4:4:4

4K xHz 4:2:0 (or) 1080p xHz

4K xHz 4:2:2

4K xHz 4:2:0 (or) 1080p xHz

4K xHz 4:2:0

1080p xHz

x = frame rate, will be equal from native to converted/scaled

Please Note: smart scaling is automatic based on the EDID of the display and cannot be controlled or adjusted by the user / integrator. To obtain resolutions lower than 1080p, a separate scaler device must be specified.

contact support@blustream.co.uk | support@blustream.com.au

CUSTOM PRO MATRIX USER MANUAL
Custom Pro Matrix Feature Boards
PRO-8IR-V2 – 8-Way Bi-Directional IR Control Board
· 8 x IR inputs (IR Rx), 3.5mm stereo jack · 8 x IR outputs (IR Tx), 3.5mm mono jack · 1 x Global IR input (3.5mm stereo jack), 1 x Global IR output (3.5mm mono jack) · As standard this card is set to accept / send 5V IR signals. To change to 12V, please remove the card from the
chassis and adjust the switch located towards the back of the main PCB of the control card · 5V IR cabling supplied Please Note: the PRO-8IR-V2 is not required for the CUSTOMPRO-HUB16. IR cards are supplied as standard within this chassis.

1 8 x 3.5mm stereo 5V/12V IR inputs for distribution of IR to compatible HDBaseTTM receivers

2 8 x 3.5mm mono 5V/12V IR outputs for routed control of local source hardware from compatible HDBaseTTM receivers

3 1 x 3.5mm stereo 5V/12V IR input for global IR control (used for control of matrix and distribution of IR to all IR TX ports)

4 1 x 3.5mm mono 5V/12V IR output for global IR output (all matrix / HDBaseTTM extender IR RX signals will output on the Global IR output)

PRO-8RS232 – 8-Way RS-232 Routing Board
· 8 x bi-directional RS-232, 3-pin phoenix · Supplied with 8 x 3-pin phoenix connector blocks

1 1 3-pin RS-232 phoenix connectors
PRO-8ABV – 8-Way Audio Breakout Board with Line Level Volume Control · 8 x coaxial digital, RCA · 8 x simultaneous analogue L/R, 3.5mm stereo jack
Please Note: when using the analogue audio outputs, the audio input must be 2ch PCM audio as the Custom Pro matrix does not down-mix multichannel audio signals.

12 1 Analogue fixed 2ch output 3.5mm stereo jack 2 Coaxial digital output
12

www.blustream.co.uk | www.blustream.com.au

CUSTOM PRO MATRIX USER MANUAL
Installing Modular Matrix Boards
Installing the modular matrix boards in the chassis is a simple process, but please note the following:
1. Power down the matrix and remove the external power supply prior to removing or installing the modular boards.
2. Handle the boards with care, ensuring that components on the boards are not knocked or damaged during installation.
3. Slide the board within the plastic guide rails on the inside of the chassis. 4. When installing the modular boards please make sure the board is located firmly within the chassis, and the
retaining screws are tightened by hand to secure the board into position. Do not overtighten. 5. The Custom Pro matrix can only support a maximum of 8 x inputs (2 x modular boards) and 8 x outputs (2 x
modular boards) for the 8×8 chassis, and a maximum of 16 x inputs (4 x modular boards) and 16 x outputs (4 x modular boards) for the 16×16 chassis.
· Location/s A – main communication board only (supplied) · Location/s B – RS-232 routing board/s only · Location/s C – video input board/s only · Location/s D – audio breakout board/s only · Location/s E – bi-directional IR control board/s only (supplied in the 16×16 chassis) · Location/s F – video output board/s only

Once all Custom Pro matrix modular boards are installed, connect the external power supply and power the matrix.

contact support@blustream.co.uk | support@blustream.com.au

CUSTOM PRO MATRIX USER MANUAL
HDBaseTTM Transmitter & Receiver Options

There are recommended Blustream HDBaseTTM transmitter and receiver options that are compatible with the HDBaseTTM CSC input and output boards of the Custom Pro matrix:

HEX70CS-TX – HDBaseTTM Transmitter · HDBaseTTM CSC transmitter with HDMI loop out · 2-Way 5V or 12V IR, and RS-232 pass-through · Local EDID management · Supports distances up to 40m @ 4K 60Hz 4:4:4, and 70m
@ 1080p Please Note: IR routing requires PRO-8IR-V2 board. RS-232 routing requires PRO-8RS232 board.

HEX100CS-TX – HDBaseTTM Transmitter · HDBaseTTM CSC transmitter with HDMI loop out · 2-Way 5V or 12V IR, and RS-232 pass-through · Local EDID management · Supports distances up to 70m @ 4K 60Hz 4:4:4, and 100m
@ 1080p Please Note: IR routing requires PRO-8IR-V2 board. RS-232 routing requires PRO-8RS232 board.

HEX70CS-RX – HDBaseTTM Receiver
· HDBaseTTM CSC receiver
· 2-Way IR, and RS-232 pass-through
· Audio breakout (simultaneous coaxial digital and 2x RCA L/R analogue fixed 2ch output)
· Supports distances up to 40m @ 4K 60Hz 4:4:4, and 70m @ 1080p
· PoC (Power over Cable) to power receiver from matrix output
Please Note: IR routing requires PRO-8IR-V2 board. RS-232 routing requires PRO-8RS232 board.

HEX100CS-RX – HDBaseTTM Receiver
· HDBaseTTM CSC receiver
· 2-Way IR, and RS-232 pass-through
· Audio breakout (simultaneous coaxial digital and 2x RCA L/R analogue fixed 2ch output)
· Supports distances up to 70m @ 4K 60Hz 4:4:4, and 100m @ 1080p
· PoC (Power over Cable) to power receiver from matrix output
Please Note: IR routing requires PRO-8IR-V2 board. RS-232 routing requires PRO-8RS232 board.

Using Other Blustream HDBaseTTM Receivers or Transmitters
Whilst HDBaseTTM as a technology is interoperable, and Blustream have designed their HDBaseTTM equipment to be interoperable, using other HDBaseTTM receivers or transmitters will likely limit the performance of the system. The HDBaseTTM receivers and transmitters noted above have been designed to specifically work, and are recommended with the Custom Pro HDBaseTTM output and input boards.

www.blustream.co.uk | www.blustream.com.au

CUSTOM PRO MATRIX USER MANUAL

Matrix Front Panel Control

Front Panel Display – Input / Output Selection

The front display shows current source input / output selection for all zones on the 8×8 chassis. The 16×16 chassis will display 4 x zones at a time, and will periodically scroll through all outputs with the relevant input selection displayed.

The front panel display will time out after a period of inactivity – press any button to wake the screen. Time out can be disabled by issuing a command to the matrix – see RS-232 and Telnet Commands towards the rear of this manual.

To change input selection first press `OUTPUT’ button (1-x), or combination of buttons to select the desired

zone.

Press desired `INPUT’ button (1-x), or combination of buttons to select the desired source input.

An `x’ on the front panel indicates that the zone output has been turned off. Zone outputs can be turned on /

off using RS-232 or TCP/IP commands. Zone outputs can be forced back on by powering OFF / ON the matrix.

All outputs will be turned on when the matrix is powered back on

OUT 1 2 X 4 5 6 7 8 IN 1 2 3 4 1 1 1 1

OUT 01 02 03 04 IN 01 02 03 04

8×8 chassis screen

16×16 chassis screen

Menu Structure
The following items can be accessed from the front panel of either chassis:
1. EDID Settings – choose the EDID required per input or as a global EDID setting for ALL inputs
2. Network Configuration – choose between: Auto or Static DHCP, view current IP address, set a new IP address, Gateway, and Subnet Mask
3. F/W Version of the matrix. Please Note: matrix firmware cannot be upgraded from the front panel of the matrix. Firmware upgrading is carried out using firmware upgrade software. Please contact a member of the Blustream Technical Support Team for more information.

contact support@blustream.co.uk | support@blustream.com.au

Advanced EDID Management

CUSTOM PRO MATRIX USER MANUAL

EDID (Extended Display Identification Data) is a data structure that is used between a display and a source. This data is used by the source to find out what audio and video resolutions are supported by the display. From this information the source will discover what the best audio and video resolutions need to be output.
Whilst the objective of EDID is to make connecting a digital display to a source a simple plug and play procedure, issues can arise when multiple displays or video matrix switching is introduced because of the increased number of variables.
By pre-determining the video resolution and audio format from the source, you can potentially reduce the time needed for the EDID part of the handshake, thus making switching both quicker, and more reliable.
As standard, Blustream distribution products containing EDID management will be set to 1080p video resolution with 2ch audio by default. This is for ease of obtaining both video and audio on first connection from most consumer and commercial source devices on the market. The EDID can then be adjusted accordingly to obtain alternative resolutions of video and audio, as required, per source device.

Configuration of matrix input EDID settings can be achieved in one of four ways:
1. Using the matrix web-GUI – see page 7 for details, or download the `Blustream Web Browser Interface Guide’ from the Blustream website for more in depth instructions. Recommended – when setting EDID for multiple inputs.
2. Using TCP/IP or RS-232 commands – see API towards the rear of this manual for further details 3. Using the matrix front panel buttons – only recommended when setting an individual / global EDID 4. Using the supplied matrix IR remote control (8×8 matrix product only) – for further details see page 19 (only
recommended when setting an individual EDID where access to front panel or the web-GUI is not available*)

The Custom Pro matrix does not feedback a prompt for successful setting of EDID using the IR remote control, therefore it is only recommend to use this method where other options are not available.

Terminating CAT Cable for use with HDBaseTTM
It is important that the interconnecting CAT cable between Blustream HDBaseTTM products is terminated using the correct RJ45 pin configuration. The link CAT cable MUST be a `straight’ (pin-to-pin) CAT cable, and it is advised that this is wired to the T568B wiring standard as this format is less prone to EMI (Electro-Magnetic Interference).
When installing CAT cables it is advised that you use the best possible CAT cable quality. HDMI distribution products will only work if used with Cat5e standard cable or above. Blustream recommends using a Cat6 cable (or better) for installations, especially when running longer distances, in areas of high EMI, or for 4K signal distribution. It is advised that using any method of patch panel, wall plate, or join within the CAT cable is avoided as these can add degradation to the signal. Blustream also recommend using RJ45 connectors that are recommended for use with the choice of CAT cable.
RJ45 Wiring T568B

www.blustream.co.uk | www.blustream.com.au

CUSTOM PRO MATRIX USER MANUAL
Understanding the HDBaseTTM Status LED’s
The Custom Pro matrix and HDBaseTTM extender solutions include status LED indicators on the matrix, transmitter, and receiver products to show all connections are active, and to help diagnose potential connectivity issues.
Understanding the Status Lights – Custom Pro Matrix: · The yellow HDBaseTTM status link light will be OFF when the input / output has been turned off, PoC (Power over
Cable) has been turned off, or there is a problem with the specific matrix input / output · The yellow HDBaseTTM status link light will BLINK when the input / output is on and working · The green HDBaseTTM link light will BLINK if there is an unstable connection between the matrix and HDBaseTTM
transmitter / receiver · The green HDBaseTTM link light will be ON when a there is an active HDBaseTTM transmitter / receiver connected to
the matrix · The green HDBaseTTM link light will be OFF when a there is no connection with a HDBaseTTM transmitter / receiver
Understanding the Status Lights – Blustream HDBaseTTM Transmitter / Receiver:
· The power link light will be OFF when no power is being received from either the matrix or from a local PSU connected directly to the transmitter / receiver (Please Note: HDBaseTTM inputs of the Custom Pro matrix do not supply PoC to Blustream HDBaseTTM transmitters)
· The power link light will be ON when power is being received from either the matrix or from a local PSU connected directly to the transmitter / receiver
· The HDMI link light will be off when there is no connection with a source / repeater / display · The HDMI link light will be ON when there is an active connection with a source / repeater / display (Please Note:
not all Blustream HDBaseTTM transmitters / receivers feature a HDMI status LED) · The HDBaseTTM link light will be OFF when there is no CAT cable / active HDBaseTTM connection to the RJ45
HDBaseTTM input / output · The HDBaseTTM link light will BLINK if there is an unstable connection between the matrix and HDBaseTTM
transmitter / receiver · The HDBaseTTM link light will be ON when a CAT cable is connected to the HDBaseTTM RJ45 input / output on the
matrix and an active connection is achieved with the Blustream HDBaseTTM transmitter / receiver
The link lights will only serve as an indication to the connectivity between matrix and remote transmitter and / or receiver unit. The LED’s will not indicate a termination, bandwidth, interference or cable length issue on a CAT cable run. Blustream would always recommend qualifying / verifying / certifying a CAT cable run for suitability prior to the installation of HDBaseTTM equipment.

contact support@blustream.co.uk | support@blustream.com.au

CUSTOM PRO MATRIX USER MANUAL
Audio Functionality
The Custom Pro matrix has the ability to embed or de-embed audio at various points of the system dependent on the use-case for the install.
Audio Embedding:

The 3.5mm analogue stereo inputs located on the main chassis control card allow for 2ch audio to be embedded onto the associated video input (i.e. L/R In 3 is permanently linked to video input 3). The original embedded audio is discarded when embedding audio, the matrix will not mix the input audio with the original source audio. Where a VGA is input using the PRO-IN2H2V card, the associated audio from the source device can be inserted here. Enabling the audio stream from these inputs is carried out by issuing an RS-232 or TCP/IP command to the matrix. Please refer to the RS-232 / Telnet command section later in this manual for further details.
Please Note: audio inputs cannot be routed independently to video.

Source Audio Breakout:

IN4HAB

HDMI In 1

L/R

HDMI In 2

L/R

HDMI In 3

L/R

HDMI In 4

L/R

The 3.5mm L/R analogue outputs contained on the PRO-IN2HAB, PRO-IN4HAB and PRO-IN2H2TCS cards can be used to breakout the 2ch PCM audio embedded from the source video input of the matrix. This signal can be used to feed a separate audio matrix product that requires the source audio input, as opposed to a zone matrix output audio that would change as the I/O structure of the matrix changes with switching.
Please Note: the L/R audio output does not down-mix multichannel audio signals to 2ch. The HDMI source audio must be 2ch PCM to obtain a breakout from these 3.5mm outputs.

Zone Audio Breakout:

Both stereo and digital audio can be broken out from the audio breakout card/s. The audio from these outputs changes with the I/O structure of the matrix – therefore, audio will follow the associated output of the video output card/s (i.e. Coax and L/R 4 is permanently linked to video output 4). The video signal retains the embedded audio signal with the video, to be carried through to the sink attached to the output. Please Note: the Coax digital and L/R analogue audio outputs are concurrent and do not down-mix multichannel audio signals. The Coax digital output can handle a digital audio stream up to 7.1ch.
The Custom Pro matrix solution does not support ARC (Audio Return Channel) through any of the input, output, or audio board configurations.

www.blustream.co.uk | www.blustream.com.au

CUSTOM PRO MATRIX USER MANUAL
Infrared (IR) Distribution
The Blustream Custom Pro matrix products include multiple options for control and routing of IR when using the IR control boards. IR matricing can be achieved (routed IR from zone to any matrix output, or matrix input to any receiver output), using TCP/IP or serial commands to select the route an IR signal can be sent from / to. The Blustream PRO-8IR-V2 control board, and the CUSTOMPRO-HUB16 are supplied with a selection of IR hardware (see Package Contents towards rear of this manual), and includes:

IR Emitter – IRE1
Blustream 5V IR emitter designed for discrete IR control of hardware.

Infrared 3.5mm Pin-Out IR Emitter – Mono 3.5mm

Signal Ground

IR Receiver – IRR
Blustream 5V IR receiver to receive IR signal and distribute through Blustream products.

IR Receiver – Stereo 3.5mm
Signal 5V Ground

IR Control Cable – IRCAB
Blustream IR control cable 3.5mm stereo to 3.5mm mono for linking 12V third party control solutions to Blustream 5V products via IR.
Please Note: cable is directional as indicated.

Please Note: Blustream IR hardware do not include flashing diodes to indicate IR signals being emitted or received.
Relevant IR cabling is suppied with the 16×16 chassis, please see package contents towards the rear of this manual.
When purchasing the PRO-8IR-V2 with the 8×8 chassis, the following IR cables are provided:
· 9 x IR emitter (IRE1) · 9 x IR receiver (IRR) · 9 x IR 3.5mm – 3.5mm stereo to mono, 12V to 5V control
cable (IRCAB)

contact support@blustream.co.uk | support@blustream.com.au

CUSTOM PRO MATRIX USER MANUAL
Infrared (IR) Control
The Blustream Custom Pro matrix units are supplied with an IR Remote Control for source selection and general setup. As well as controlling matrix solutions using the original Blustream remote, Blustream products can also be controlled using the original Infrared NEC codes documented towards the rear of this manual.

POWER

OUTPUT
123 567
ALL PTP
INPUT
123 567
ALL
1080i 1080p 3D

4 8
A
4 8
B
4K

2.0CH 5.1CH 7.1CH COPY

USER1 USER2 FN1 FN2

EDID
C

OUTPUT AND INPUT SELECTION
The remote adjacent is supplied with the 8×8 chassis. The remote adjacent/below is supplied with the 16×16 chassis.
When controlling the I/O structure of the matrix (issuing the command from the remote, to the front of the matrix):
1. Select the OUTPUT you wish to change the input source of – numbers 1 – 8/16 correspond to the zone outputs 1 – 8/16 – highlighted in box A. 2. Select the INPUT you wish to change on the selected zone to – numbers 1 – 8/16 correspond to the source inputs 1 – 8/16 – highlighted in box B. 3. Press the PTP button if you wish to instantly mirror all inputs to corresponding outputs (for example – input 1 to output 1, input 2 to output 2 etc).
When controlling the I/O structure of the matrix when located within a zone (where IR is sent over HDBaseTTM to the matrix), it is only necessary to press the relevant INPUT button, or the left / right scrolling buttons.
Please Note: the POWER button will only work when the command is issued to the front panel (IR window) of the matrix, not from an IR receiver within a zone.

EDID SET UP VIA REMOTE CONTROL

The Custom Pro matrix provides a comprehensive range of EDID settings. Below

are three examples of how to deploy the desired EDID setting when using the

supplied remote for the 8×8 Custom Pro matrix (not available with the 16×16*):

1. Fix EDID to an input, or ALL inputs: press the desired video resolution button (1080i / 1080p / 3D / 4K), select the desired audio format (2.0ch / 5.1ch / 7.1ch), then select the source input you want this EDID information allocated to by pressing the INPUT 1 8, or the ALL button.
2. Copy EDID of output (X) to an input or ALL: Press the COPY button then select the OUTPUT you wish to copy the EDID information from, then select the source input you want to copy this EDID to by selecting the INPUT 1 – 8 or the ALL button.
3. User defined EDID to an input, or ALL inputs: Press USER1 / USER2 button then select the source you wish to assign this EDID to by selecting INPUT 1 – 8, or the ALL button.

EDID management for the 16×16 Matrix product can only be carried out using the web-GUI, front panel

buttons, Blustream Matrix App, or by issuing RS-232 / IP commmands to the unit, and not from the

supplied IR remote control.

www.blustream.co.uk | www.blustream.com.au

contact support@blustream.co.uk | support@blustream.com.au

Example Schematic 8×8 Chassis
CAT Cable RS-232 HDMI Audio IR Cable

Control Processor

Audio Source

8ABV

IN4HAB

HDMI In 1

L/R

HDMI In 2

L/R

HDMI In 3

L/R

HDMI In 4

L/R

IN4HAB

HDMI In 1

L/R

HDMI In 2

L/R

HDMI In 3

L/R

HDMI In 4

L/R

OUT4TLS-V2

Maximum of 8 4K Sources

ABCD

Up To 70m Max

A HDMI B IR C Power over Cable D RS-232

Display 1

Both outputs from the same zone, HDMI and HDBT will output the same signal
In Out
Display 2

CUSTOM PRO MATRIX USER MANUAL

Example Schematic 16×16 Chassis

Control Processor

Audio Source

CUSTOM PRO MATRIX USER MANUAL

www.blustream.co.uk | www.blustream.com.au

CAT Cable RS-232 HDMI Audio IR Cable

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Maximum of 16 4K Sources

Up To 70m Max
ABCD
In
A HDMI B IR C Power over Cable Out D RS-232

Both outputs from the same zone, HDMI and HDBT will output the same signal
In
Out
1080p Display

4K Display

4K Projector

Specifications

CUSTOM PRO MATRIX USER MANUAL

CUSTOMPRO-HUB Modular (8×8) Chassis Audio Input Connections: 8 x 3.5mm stereo jack RS-232 Serial Port: 1 x DB-9, female TCP/IP Control: 1 x RJ45, female Rack Mountable: 2U rack height, rack ears included Casing Dimensions (W x D x H): 440mm x 283mm x 87mm, without feet Dimensions (W x D x H): 440mm x 291mm x 94mm, with feet and connections Shipping Weight: 5.5kg Operating Temperature: 32°F to 104°F (0°C to 40°C) Storage Temperature: -4°F to 140°F (-20°C to 60°C) Power Supply: 1 x 24V/8A DC transformer to 4-pin DIN

CUSTOMPRO-HUB16 Modular (16×16) Chassis Audio Input Connections: 16 x 3.5mm stereo jack RS-232 Serial Port: 1 x DB-9, female TCP/IP Control: 1 x RJ45, female IR Input Connections: 17 x 3.5mm stereo jack IR Output Connections: 17 x 3.5mm mono jack Rack Mountable: 4U rack height, rack ears included Casing Dimensions (W x D x H): 440mm x 422mm x 173mm, without feet Dimensions (W x D x H): 440mm x 430mm x 178mm, with feet and connections Shipping Weight: 11kg Operating Temperature: 32°F to 104°F (0°C to 40°C) Storage Temperature: -4°F to 140°F (-20°C to 60°C) Power Supply: Internal 100-240V AC, IEC cables supplied

Package Contents
CUSTOMPRO-HUB · 1 x CUSTOMPRO-HUB
(including Control Board) · 1 x Rack Mounting Kit · 1 x 24V/8A DC Power Supply & IEC power cabling · 1 x Remote Control (REM88) · 1 x Quick Reference Guide

CUSTOMPRO-HUB16 · 1 x CUSTOMPRO-HUB16
(including Control Boards, and IR Routing Boards) · 1 x Rack Mounting Kit · IEC Power Cabling · 1 x Remote Control (REM16) · 4 x IR Emitter (IRE1) · 5 x IR Receiver (IRR) · 5 x IR 3.5mm – 3.5mm Stereo to Mono, 12V to 5V
Control Cable (IRCAB) · 1 x Quick Reference Guide

Maintenance
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzene to clean this unit.

contact support@blustream.co.uk | support@blustream.com.au

CUSTOM PRO MATRIX USER MANUAL

IR Commands (8×8 Remote)

NEC Customer Code = 1898 Advanced matrix features are not available via IR commands

COMMAND NEC

POWER TOGGLE

0x14

OUTPUT 1 0x09

OUTPUT 2 0x1d

OUTPUT 3 0x1f

OUTPUT 4 0x0d

OUTPUT 5 0x19

OUTPUT 6 0x1b

OUTPUT 7 0x11

OUTPUT 8 0x15

OUTPUT ALL 0x17

OUTPUT PTP

0x12

INPUT 1

0x50

INPUT 2

0x55

INPUT 3

0x48

INPUT 4

0x4a

INPUT 5

0x5e

INPUT 6

0x06

INPUT 7

0x05

INPUT 8

0x03

INPUT ALL 0x47

INPUT DOWN

0x07

INPUT UP 0x40

HEX
0000 0069 0000 002a 0150 00a8 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 003f 0015 0015 0015 003f 0015 003f 0015 003f 0015 05d3
0000 0069 0000 002a 0150 00a8 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 003f 0015 003f 0015 003f 0015 003f 0015 05d3
0000 0069 0000 002a 0150 00a8 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 0015 0015 003f 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 003f 0015 05d3
0000 0069 0000 002a 0150 00a8 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 003f 0015 05d3
0000 0069 0000 002a 0150 00a8 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 003f 0015 003f 0015 003f 0015 003f 0015 05d3
0000 0069 0000 002a 0150 00a8 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 003f 0015 003f 0015 05d3
0000 0069 0000 002a 0150 00a8 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 003f 0015 003f 0015 003f 0015 05d3
0000 0069 0000 002a 0150 00a8 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 003f 0015 0015 0015 003f 0015 003f 0015 003f 0015 05d3
0000 0069 0000 002a 0150 00a8 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 0015 0015 003f 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 0015 0015 003f 0015 0015 0015 003f 0015 003f 0015 003f 0015 05d3
0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 003F 0016 003F 0016 003F 0016 0016 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 0016 0016 003F 0016 003F 0016 003F 0016 0689
0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 0016 0016 003F 0016 0016 0016 0016 0016 003F 0016 0016 0016 0016 0016 0016 0016 003F 0016 0016 0016 003F 0016 003F 0016 0016 0016 003F 0016 003F 0016 003F 0016 0689
0000 0069 0000 002a 0150 00a8 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 0015 0015 003f 0015 0015 0015 003f 0015 003f 0015 003f 0015 003f 0015 0015 0015 003f 0015 0015 0015 003f 0015 05d3
0000 0069 0000 002a 0150 00a8 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 0015 0015 003f 0015 0015 0015 003f 0015 0015 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 003f 0015 0015 0015 003f 0015 0015 0015 003f 0015 05d3
0000 0069 0000 002a 0150 00a8 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 003f 0015 003f 0015 003f 0015 0015 0015 003f 0015 003f 0015 0015 0015 003f 0015 05d3
0000 0069 0000 002a 0150 00a8 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 0015 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 003f 0015 0015 0015 003f 0015 0015 0015 003f 0015 003f 0015 0015 0015 003f 0015 05d3
0000 0069 0000 002a 0150 00a8 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 003f 0015 003f 0015 0015 0015 003f 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 0015 0015 003f 0015 05d3
0000 0069 0000 002a 0150 00a8 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 05d3
0000 0069 0000 002a 0150 00a8 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 0015 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 05d3
0000 0069 0000 002a 0150 00a8 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 003f 0015 05d3
0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 003F 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 003F 0016 0016 0016 003F 0016 0689
0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 003F 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 0689
0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 0016 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 0016 0016 003F 0016 0689

www.blustream.co.uk | www.blustream.com.au

CUSTOM PRO MATRIX USER MANUAL

COMMAND NEC

1080i

0x18

1080p

0x44

0x0f

0x51

2.0ch AUDIO

0x0a

5.1ch AUDIO

0x1e

7.1ch AUDIO

0x0e

COPY EDID 0x1a

USER 1

0x53

USER 2

0x52

USER 3

0x01

USER 4

0x45

HEX
0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 003F 0016 003F 0016 0689
0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 0016 0016 0016 0016 003F 0016 0016 0016 0016 0016 0016 0016 003F 0016 0016 0016 003F 0016 003F 0016 0016 0016 003F 0016 003F 0016 003F 0016 0016 0016 003F 0016 0689
0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 0016 0016 0016 0016 003F 0016 0016 0016 0016 0016 0016 0016 003F 0016 0016 0016 003F 0016 003F 0016 0016 0016 003F 0016 003F 0016 003F 0016 0016 0016 003F 0016 0689
0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 003F 0016 0016 0016 003F 0016 0016 0016 0016 0016 003F 0016 003F 0016 003F 0016 0016 0016 003F 0016 0016 0016 003F 0016v0689
0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 0016 0016 003F 0016 0016 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 0016 0016 003F 0016 0016 0016 003F 0016 003F 0016 003F 0016 003F 0016 0689
0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 0016 0016 003F 0016 003F 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 003F 0016 0689
0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 0016 0016 003F 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 003F 0016 003F 0016 0689
0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 0016 0016 003F 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 003F 0016 0016 0016 003F 0016 0016 0016 0016 0016 003F 0016 003F 0016 003F 0016 0689
0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 0016 0016 003F 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 003F 0016 0016 0016 003F 0016 0689
0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 0016 0016 003F 0016 0016 0016 0016 0016 003F 0016 0016 0016 003F 0016 0016 0016 003F 0016 0016 0016 003F 0016 003F 0016 0016 0016 003F 0016 0016 0016 003F 0016 0689
0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 0689
0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 003F 0016 0016 0016 0016 0016 0016 0016 003F 0016 0016 0016 0016 0016 003F 0016 0016 0016 003F 0016 003F 0016 003F 0016 0016 0016 003F 0016 0689

contact support@blustream.co.uk | support@blustream.com.au

CUSTOM PRO MATRIX USER MANUAL

IR Commands (16×16 Remote) NEC Customer Code = 1898 Advanced matrix features are not available via IR commands

COMMAND NEC

POWER TOGGLE

0x14

OUTPUT 1 0x09

OUTPUT 2 0x1d

OUTPUT 3 0x1f

OUTPUT 4 0x0d

OUTPUT 5 0x19

OUTPUT 6 0x1b

OUTPUT 7 0x11

OUTPUT 8 0x15

OUTPUT 9 0x17

OUTPUT 10 0x12

OUTPUT 11 0x59

OUTPUT 12 0x08

OUTPUT 13 0x50

OUTPUT 14 0x55

OUTPUT 15 0x48

OUTPUT 16 0x4a

OUTPUT ALL 0x41

OUTPUT PTP

0x46

INPUT 1

0x5e

INPUT 2

0x06

INPUT 3

0x05

HEX
0000 006e 0000 002c 0160 00b0 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0042 0016 0016 0016 0016 0016 0042 0016 0016 0016 0042 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0042 0016 0016 0016 0042 0016 0042 0016 0042 0016 061a
0000 006e 0000 002c 0160 00b0 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0042 0016 0042 0016 0042 0016 0042 0016 061a
0000 006e 0000 002c 0160 00b0 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0042 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0042 0016 061a
0000 006e 0000 002c 0160 00b0 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0042 0016 0042 0016 0042 0016 0042 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0042 0016 061a
0000 006e 0000 002c 0160 00b0 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0016 0016 0016 0016 0042 0016 0042 0016 0042 0016 0042 0016 061a
0000 006e 0000 002c 0160 00b0 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0042 0016 0042 0016 0042 0016 061a
0000 006e 0000 002c 0160 00b0 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0042 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0042 0016 061a
0000 006e 0000 002c 0160 00b0 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0042 0016 0016 0016 0042 0016 0042 0016 0042 0016 061a
0000 006e 0000 002c 0160 00b0 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0042 0016 0016 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0016 0016 0042 0016 0016 0016 0042 0016 0042 0016 0042 0016 061a
0000 006e 0000 002c 0160 00b0 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0042 0016 0042 0016 0042 0016 0042 0016 0016 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0016 0016 0042 0016 0042 0016 0042 0016 061a
0000 006e 0000 002c 0160 00b0 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0042 0016 0016 0016 0042 0016 0016 0016 0016 0016 0042 0016 0016 0016 0016 0016 0016 0016 0042 0016 0016 0016 0042 0016 0042 0016 0016 0016 0042 0016 0042 0016 0042 0016 061a
0000 006e 0000 002c 0160 00b0 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0042 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0042 0016 0016 0016 0042 0016 061a
0000 006e 0000 002c 0160 00b0 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0042 0016 0016 0016 0016 0016 0016 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0042 0016 0016 0016 0042 0016 0042 0016 0042 0016 0042 0016 061a
0000 006e 0000 002c 0160 00b0 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0016 0016 0042 0016 0016 0016 0042 0016 0042 0016 0042 0016 0042 0016 0016 0016 0042 0016 0016 0016 0042 0016 061a
0000 006e 0000 002c 0160 00b0 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0042 0016 0016 0016 0042 0016 0016 0016 0042 0016 0016 0016 0016 0016 0042 0016 0016 0016 0042 0016 0016 0016 0042 0016 0016 0016 0042 0016 061a
0000 006e 0000 002c 0160 00b0 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0042 0016 0016 0016 0016 0016 0016 0016 0042 0016 0016 0016 0016 0016 0042 0016 0016 0016 0042 0016 0042 0016 0042 0016 0016 0016 0042 0016 0042 0016 0016 0016 0042 0016 061a
0000 006e 0000 002c 0160 00b0 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0042 0016 0016 0016 0042 0016 0016 0016 0042 0016 0016 0016 0016 0016 0042 0016 0016 0016 0042 0016 0016 0016 0042 0016 0016 0016 0042 0016 0042 0016 0016 0016 0042 0016 061a
0000 006e 0000 002c 0160 00b0 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0016 0016 0016 0016 0042 0016 0042 0016 0042 0016 0042 0016 0042 0016 0016 0016 0042 0016 061a
0000 006e 0000 002c 0160 00b0 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0042 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0042 0016 0016 0016 0042 0016 0016 0016 0016 0016 0042 0016 0042 0016 0042 0016 0016 0016 0042 0016 061a
0000 006e 0000 002c 0160 00b0 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0042 0016 0016 0016 0042 0016 0042 0016 0042 0016 0042 0016 0016 0016 0042 0016 0016 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0016 0016 0042 0016 061a
0000 006e 0000 002c 0160 00b0 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0042 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0016 0016 0016 0016 0042 0016 0042 0016 0042 0016 0042 0016 0042 0016 061a
0000 006e 0000 002c 0160 00b0 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0016 0016 0042 0016 0042 0016 0016 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0016 0016 0042 0016 0042 0016 0042 0016 0042 0016 0042 0016 061a

www.blustream.co.uk | www.blustream.com.au

CUSTOM PRO MATRIX USER MANUAL

COMMAND INPUT 4

NEC 0x03

INPUT 5

0x47

INPUT 6

0x07

INPUT 7

0x40

INPUT 8

0x02

INPUT 9

0x18

INPUT 10 0x44

INPUT 11 0x0f

INPUT 12 0x51

INPUT 13 0x0a

INPUT 14 0x1e

INPUT 15 0x0e

INPUT 16 0x1a

NEXT >

0x01

PREVIOUS < 0x52

contact support@blustream.co.uk | support@blustream.com.au

CUSTOM PRO MATRIX USER MANUAL
RS-232 and Telnet Commands
The Blustream Custom Pro matrix can be controlled via serial and/or TCP/IP. The following pages list all available commands for the Custom Pro matrix chassis. Details of RS-232 pin assignment below:

CUSTOM PRO
PIN Assignment 1 NC 2 Tx 3 Rx 4 NC 5 GND 6 NC 7 NC 8 NC 9 NC

REMOTE CONTROL CONSOLE
PIN Assignment 1 NC 2 Rx 3 Tx 4 NC 5 GND 6 NC 7 NC 8 NC 9 NC

Baud rate: 57600 bps Data bit: 8-bit Parity: none Stop bit: 1-bit Flow control: none

Commonly Used Serial Commands: There are several commands that are commonly used for control and testing:

STATUS ? PON POFF OUTxxON
example: OUTxxFRyy
example:

Status will give feedback on matrix such as zones on, type of connection etc Lists all commands the matrix can accept Matrix power on Matrix power off (where xx is the zone number you wish to turn on) OUT01ON (this would turn output 1 back on) (where xx is the zone out, yy is the input) OUT01FR04 (this would switch output 1 to source input 4)

Common Mistakes:
· Carriage return some programs do not require a carriage return, where others will not work unless sent directly after the string. In the case of some terminal software the token is used to execute a carriage return. Depending on the program being used, this token may be different. Some other examples that other control systems deploy include r or 0D (in hex).
· Spaces Blustream products do not require spacing between commands unless specified. There may however be some terminal programs that will require spacing in order to work:
– How the string should look: OUT01ON
– How the string may look if spaces are required: OUT {Space} 01 {Space} ON
· Baud rate or other serial protocol settings not correct.

www.blustream.co.uk | www.blustream.com.au

RS-232 and Telnet Commands

COMMAND
? HELP STATUS

ACTION Print help information Print help information Print system status and port status

COMMAND
VOL xx TX yy
MUTE ON/OFF TX yy

CUSTOM PRO MATRIX USER MANUAL
ACTION Set output audio:yy volume to:xx yy=[00]: All output audio, [01..16]: Output audio xx=[00..100]: volume value xx=+: Volume increase xx=-: Volume decrease
Set output audio:yy Mute On or Off yy=[01..16]: Output audio

PON

Power On, system run on normal state

OUT xx ON/OFF Set OUTPUT:xx On or Off

POFF

Power Off, system run on power save state

IR ON/OFF

Set system IR control On or Off

KEY ON/OFF

Set system (front panel) KEY control On or Off

BEEP ON/OFF

Set onboard beep On or Off

LCD ON/OFF
RSB x RESET RESET ALL

Set LCD always On or Auto turn off in power on state
Set baud rate to x bps x = 0: 115200 x = 1: 57600 x = 2: 38400 x = 3: 19200 x = 4: 9600
Reset system to default setting
Reset system and network to default setting
(type “Yes” to confirm, “No” to Discard)

IN CSC ON/OFF

Set all Input ports CSC mode On or Off

Output xx turn ON/OFF POH (Keeps Zone active POH TX xx ON/OFF but cuts PoC for when output is connected to
third party HDBaseT hardware

OUT xx FR yy

Set OUTPUT:xx from INPUT:yy

OUT xx EH/ET

Set OUTPUT:xx use HDMI/HDBT EDID xx=[00]: All OUTPUT port, [01…08]: OUTPUT port yy=[01…08]: INPUT port

MUTE ON/OFF OUT yy

Set output audio: yy mute ON or OFF

NET DHCP ON/OF Set auto IP (DHCP) ON or OFF

NET IP xxx.xxx. xxx.xxx

Set IP address

NET GW xxx.xxx. xxx.xxx

Set gateway address

NET SM xxx.xxx. xxx.xxx

Set subnet mask address

NET RB

Set network reboot and apply new config

OUT CSC ON/OFF Set all Output ports CSC mode On or Off

IN xx UHD ON/OFF

Set INPUT:xx EDID support UHD mode On or Off xx=[00]: ALL Input port, [01…16]: Input port

AUD STA

Print Input/Output port audio setting state

AUD RX xx ORG

Input port:xx use original receive HDMI/DVI signal

AUD RX xx ANA

Input port:xx insert stereo to HDMI/DVI signal

AUD RX xx AUTO

Input port:xx insert stereo to DVI signal only xx==[00]: All Input Port, [01…08]: Input Port

NET TN xxxx

Set telnet port

PRESET STATUS Print present config status

PRESET pp SET aa, bb, cc … oo, pp

Set preset config pp=[01..08]: select preset index aa=[01..16]: output 01 from aa, [00]: not set bb: output 02 … pp: output 16

PRESET pp SAVE

Save current output connection to preset:pp config

PRESET pp APPLY Apply preset:pp config to output connection

contact support@blustream.co.uk | support@blustream.com.au

RS-232 and Telnet Commands

COMMAND

ACTION

CUSTOM PRO MATRIX USER MANUAL

EDID xx CP yy EDID xx DF zz

Set input:xx EDID copy from output:yy
Set Input:xx EDID To Default EDID:zz xx=[00]: All INPUT Port, [01…06]: INPUT Port yy=[01…06]: OUTPUT Port zz=00: HDMI 1080p@60Hz, Audio 2ch PCM zz=01: HDMI 1080p@60Hz, Audio 5.1ch DTS/DOLBY zz=02: HDMI 1080p@60Hz, Audio 7.1ch DTS/DOLBY/HD zz=03: HDMI 1080i@60Hz, Audio 2ch PCM zz=04: HDMI 1080i@60Hz, Audio 5.1ch DTS/DOLBY zz=05: HDMI 1080i@60Hz, Audio 7.1ch DTS/DOLBY/HD zz=06: HDMI 1080p@60Hz/3D, Audio 2ch PCM zz=07: HDMI 1080p@60Hz/3D, Audio 5.1ch DTS/DOLBY zz=08: HDMI 1080p@60Hz/3D, Audio 7.1ch DTS/DOLBY/HD zz=09: HDMI 4K@30Hz 4:4:4, Audio 2ch PCM zz=10: HDMI 4K@30Hz 4:4:4, Audio 5.1ch DTS/DOLBY zz=11: HDMI 4K@30Hz 4:4:4, Audio 7.1ch DTS/DOLBY/HD zz=12: DVI 1280×1024@60Hz, Audio None zz=13: DVI 1920×1080@60Hz, Audio None zz=14: DVI 1920×1200@60Hz, Audio None zz=15: User EDID 1 zz=16: User EDID 2 zz=17: GUI Download EDID zz=18: HDMI 4K@60Hz 4:2:0, Audio 2ch PCM zz=19: HDMI 4K@60Hz 4:2:0, Audio 5.1ch DTS/DOLBY zz=20: HDMI 4K@60Hz 4:2:0, Audio 7.1ch DTS/DOLBY/HD

EDID SAVE yy TO ss

Save output:yy EDID to user memory:ss ss=[01…02]: User EDID memory

MXSTA

Print matrix IR and RS-232 connect state

MXIR xx FR yy MXIR GI (+-)xx MXIR GO (+-)xx

Remote RX:xx IR output from local IR in:yy xx=[00]: All remote IR output, [01..16]: Remote RX IR output yy=[01..16] Local IR in
Global all IR In signal goes to which IR output:xx xx=[17..32]: Local IR output xx=[33..48]: Remote HDBT receiver IR output +: Add xx to current setting -: Remove xx from current setting
Global all IR Out signal goes to which IR input:xx xx=[17..32]: Local IR input xx=[33..48]: Remote HDBT receiver IR input xx=[49]: Global all IR in +: Add xx to current setting -: Remove xx from current setting

www.blustream.co.uk | www.blustream.com.au

Certifications

CUSTOM PRO MATRIX USER MANUAL

FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.

CAUTION – changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.

CANADA, INDUSTRY CANADA (IC) NOTICES
This Class B digital apparatus complies with Canadian ICES-003.

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

CANADA, AVIS D’INDUSTRY CANADA (IC)
Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003.

Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d’interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui peuvent affecter son fonctionnement.

CORRECT DISPOSAL OF THIS PRODUCT
This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

contact support@blustream.co.uk | support@blustream.com.au

CUSTOM PRO MATRIX USER MANUAL

Notes

www.blustream.co.uk | www.blustream.com.au

References

blustream.com.au

Read User Manual Online (PDF format)

Read User Manual Online (PDF format) >>

Download This Manual (PDF format)

Download this manual >>

2 U Custom Pro Matrix Hub CUSTOMPRO-HUB

References

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Related Manuals