Traceable 5667 4 Channel Timer User Guide

Traceable 5667 4 Channel Timer

WARRANTY, SERVICE, OR RECALIBRATION
Traceable® Products are ISO 9001:2018 Quality- Certified by DNV and ISO/IEC 17025:2017 accredited as a Calibration Laboratory by A2LA

• Item No. 56000-16
• Model No. 5667

©2022 1065T9_M_92-5667-00 Rev. 0 09022022

SETTING A TIMER

1. Press CH/CLOCK button until the desired channel is solid (not flashing) on the screen.
2. Use the H/M/S buttons to configure timer.

Note : To clear and start over, press CLEAR button

STARTING A TIMER

• When starting/stopping an individual timer, navigate to that timing channel using the CH/ CLOCK button and then press START/STOP ALL.
• To start/stop all timers, press the START/STOP ALL button from the clock screen.
• Timers which are counting down will lash quickly.
• Timers which are counting up will lash slowly.
• Timers which have expired will lash rapidly

Traceable® 4-Channel Timer

INITIAL SETUP

1. Remove battery cover and insert batteries
2. Replace battery cover
3. Press CH/CLOCK button until clock appears on top row of display.
4. Hold CH/CLOCK until there is an audible beep and the time flashes
5. To adjust 12/24 hour clock, press and hold START/ STOP ALL button.
6. Use H/M/S buttons to adjust the time
7. Pressing Seconds button will round to the nearest minute.
8. Press the CH/CLOCK button to exit setup

1.888.610.7664
www.calcert.com
sales@calcert.com

References

• Traceable Products
• Calcert

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>