Traceable 5665TR Three Channel Alarm Timer User Guide
- June 9, 2024
- TRACEABLE
Table of Contents
5665TR Three Channel Alarm Timer
User Guide
5665TR Three Channel Alarm Timer
Traceable® Products are ISO 9001:2018 Quality- Certified by DNV and ISO/IEC 17025:2017 accredited as a Calibration Laboratory by A2LA. Item No. 56000-13 Model No. 5665 ©2022 1065T8_M_92-5665-00 Rev. 0 09022022
INITIAL SETUP
-
Remove battery cober and install batteries.
-
Use the volume slider to adjust buzzer volume.
-
Use the duration slider to adjust alarm duration.
-
Replace battery cover.
-
Press TIMER/CLOCK until time appears on screen.
-
Hold TIMER/CLOCK until there is an audible beep.
-
Use H/M/S buttons to set time; press TIMER/CLOCK when done.
-
Use H/M/S buttons to configure alarm and date.
Note: To activate alarm, press START/ STOP ALL button when ALARM is
lashing. ALARM will appear on display if alarm is active.
SETTING A TIMER
- Press TIMER/CLOCK until timer is displayed.
- Press and hold START/STOP on the timing channel to be configured.
- Use H/M/S buttons to configure timer.
- Press START/STOP on timing channel to set timer.
Note: To recall memory, simply press START/STOP button after the timer
has alarmed.
STARTING A TIMER
To start/stop an individual channel, press the START/STOP button for that
channel. To start/stop all channels, press the START/STOP ALL button
Note: If a channel has not been configured with a set time, pressing
START/ STOP on that channel or START/STOPALL will start a count up and TIME
UP will flash on that channel.
1.888.610.7664
www.calcert.com
sales@calcert.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>