Trust 71090 Timer Remote Control User Manual

: June 9, 2024
: Trust

Table of Contents

Trust 71090 Timer Remote Control
LCD screen layout
Control 1 Trust Smart Home receiver per unit
Manual operation of a Trust Smart Home on/off the receiver
Set clock time
Program a timer setting
Enable or disable Child Protection
Safety Instructions
Declaration of Conformity
TECHNICAL SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Trust 71090 Timer Remote Control

Trust-71090-Timer-Remote-Control-product

LCD screen layout

Timer program
Clock
Unit selection
Low-battery indicator
Repeat daily

Remove pull strip

Open the battery compartment by screwing it open.
Remove the battery pull strip
Close the battery compartment. $Trust-71090-Timer-Remote-Control-fig- $2$$

Control 1 Trust Smart Home receiver per unit

To control receivers individually, assign each receiver to a seperate unit (1 to 16). Read the receiver’s manual for the code-learning procedure.

Control multiple Trust Smart Home receivers per unit
To control several receivers simultaneously, assign several receivers to 1 unit (1 to 16). Read the receiver’s manual for the code-learning procedure.

Manual operation of a Trust Smart Home on/off the receiver

Press [ ] and [ ] to select a UNIT.
Press ON to switch the receiver on.
Press OFF to switch the receiver off.

Manual operation of a Trust Smart Home dimmer receiver

Press [ ] and [ ] to select a UNIT.
Press ON once to switch the receiver on.
Press ON again to activate the dim mode. The light will slowly dim up and down.
Press ON a third time to set the desired light intensity.
Press OFF to switch the receiver off.

Manual operation of a Trust Smart Home electric screens receiver

Press [ ] and [ ] to select a UNIT.
Send an ON-signal to raise the screen.
Send an ON-signal again to stop.
Send an OFF signal to lower the screen.
Send an OFF signal again to stop.

Read the receiver’s manual to reverse the direction of the screen, if needed.

Set clock time

Press [CLOCK] for 3 seconds until the time indicator begins to flash.
Press [ ] and [ ] to change the hour.
Press [ENTER].
Press [ ] and [ ] to change the minute.
Press [ENTER] to confirm the clock time setting. $Trust-71090-Timer-Remote-Control-fig- $6$$

Program a timer setting

Press [TIMER] for 3 seconds until the program screen appears.

Select memory address (1-12)

Press [ ] or [ ] to select a memory address.
Press [ENTER] to confirm.

Select a UNIT (1-16)

Press [ ] or [ ] to select a UNIT.
Press [ENTER] to confirm.

Program ON-time

Press [ ] or [ ] to change the hour.
Press [ENTER].
Press [ ] or [ ] to change the minute.
Press [ENTER] to confirm.

Program OFF-time

Press [ ] or [ ] to change the hour.
Press [ENTER].
Press [ ] or [ ] to change the minute.
Press [ENTER] to confirm.

Select a timer mode

Press [ ] or [ ] to change the mode (daily, once, random).
Press [ENTER] to confirm.
Press [TIMER] to return to the main screen or wait 10 seconds and the main screen will automatically appear.

Pause a timer program

Press [TIMER] for 3 seconds.
Press [ ] or [ ] to select the program that needs to be paused.
Press [II/DEL]. A box will appear around the timer program.
Press [ENTER] to confirm.
Press [TIMER] to return to the main screen or wait 10 seconds. Repeat this procedure to unpause a timer program.

Delete a timer program

Press [TIMER] for 3 seconds.
Press [ ] or [ ] to select the program that needs to be deleted.
Press [II/DEL] for 3 seconds until the program starts to flash.
Press [ENTER] to confirm the deletion.
Press [TIMER] to return to the main screen or wait for 10 seconds to automatically return.

Enable or disable Child Protection

Press and hold [ENTER] and [II/DEL] for 3 seconds to enable Child Protection. CP will appear in the display. All keys will be blocked.
Press and hold [ENTER] and [II/DEL] again for 3 seconds to disable Child Protection.

Safety Instructions

Product support:
www.trust.com/71090.

Warranty conditions:
www.trust.com/warranty. To ensure the safe handling of the device, follow the safety advice on: www.trust.com/safety. The Wireless range is strongly dependent on local conditions such as the presence of HR glass and reinforced concrete Never use Trust Smart Home products for life-support systems. This product is not water-resistant. Do not attempt to repair this product. Wire colors may vary per country. Contact an electrician when in doubt about wiring. Never connect lights or equipment that exceed the maximum load of the receiver. Exercise caution when installing a receiver voltage may be present, even when a receiver is switched off. Maximum radio transmits power: -6.41 dBm. Radio transmission frequency range: 433,92 MHz.

Disposal of packaging materials – Dispose of packaging materials that are no longer needed in accordance with applicable local regulations.
Disposal of the device – The adjacent symbol of a crossed-out wheelie bin means that this device is subject to Directive 2012/19/EU.
Disposal of batteries – Used batteries may not be disposed of in the household waste. Only dispose of batteries when they are fully discharged. Dispose of batteries according to local regulations.
Trust Electronics Ltd. declares that item number 71090/71090-02 is in compliance with Directive Electromagnetic Compatibility Regulations 2016, and Radio Equipment Regulations 2017. The full text of the declaration of conformity is available at the following internet address: www.trust.com/compliance.
Trust International B.V. declares that item number 71090/71090-02 is in compliance with Directive 2014/53/EU – 2011/65/EU. The full text of the EU declaration of conformity is available at the following web address: www.trust.com/compliance.