Homak BK04041062 41 Inch Black 6-Drawer Roller Cabinet Owner’s Manual
- June 9, 2024
- Homak
Table of Contents
Homak BK04041062 41 Inch Black 6-Drawer Roller Cabinet
WARNING
- Close and lock drawers before moving.
- Do not stand on the product. You may fall which may cause personal injury.
- Do not climb on, in or around. Keep away from children.
- Unit has a maximum load capacity of 100 lbs (45.3 kgs) per drawer. Do not overload.
- Do not push, pull to move.
- Do not step in the drawers. You may fall which may cause personal injury
- Read all instructions and safety tips before using this product.
THANK YOU FOR PURCHASING A HOMAK UNIT. WE APPRECIATE YOUR BUSINESS.
Congratulations on your new purchase! Before operating your unit, please read
the following carefully:
KEEP INSTRUCTION MANUAL IN A SAFE PLACE UPON OPENING YOUR NEW UNIT. THE KEY
CODE TO YOUR HMC SECURE PREMIUM TUBULUR LOCK CAN BE FOUND ON THE BACK OF THIS
MANUAL. IF THIS CODE IS LOST, PLEASE CALL
1-800-874-6625 FOR ASSISTANCE.
For Replacement Parts, Technical Troubleshooting or Sales & Service, please
call 1-800-874-6625 and a
representative will assist you.
Assembly
- Before assembling parts, please check the parts quantity according to the PARTS LIST.
- Carefully unpack and spread out all parts in a large uncluttered area.
- Familiarize yourself with all parts and compare them with the drawing below to make sure none are missing. Read all assembly instructions before beginning.
PARTS LIST
MAINTENANCE
Ball-Bearing Slides
Note: Unload drawer prior to drawer removal. Never overload drawers.
To remove drawers and slides, pull drawer all the way out, depress the black
drawer release levers on each slide. For ball-bearing glides, there is one
black lever per slide. One black lever will be pushed down and the other will
be pushed up for drawer removal. After levers are pushed, the drawer is
released. Pull out drawer all the way for removal.
To re-install the drawer, insert guides on drawer side into slides and firmly close drawer all the way. To maintain the smooth and quiet operation of the ball-bearing slides, lubricate the extension track that houses the ball bearings every 3-6 months with a high-quality jelly-like petroleum-based lubricant.
Powder Coat Finish
For heavy build-up of dirt and grime, our powder coat paint finish can be
cleaned with WD-40 or Murphy’s Oil Soap using a soft cloth when needed. Window
cleaner and a soft cloth dampened with water can be used to clean the finish
on a regular basis.
Customer Satisfaction
All mechanical parts are inspected and adjusted for proper use before
shipment; however, mechanisms such as drawer slides and locks may shift during
transit. Should any of these items not operate correctly, please call customer
assistance at 1-800-67 4-6625.
PLEASE KEEP IN A SAFE AND SECURE PLACE AWAY FROM CHILDREN.
PRODUCT REGISTRATION
Thank you for purchasing this quality HOMAK product. Please take the time to
register your manufacturer’s code and product by calling
1-800-874-6625 or by visiting
www.homak.com and clicking the “Product Registration· link.
This will allow us to better assist you in the future for:
- Parts
- Warranty claims
- Other product concerns
- Troubleshooting
Please Read Entire Instruction Manual Before Operating Unit In Order to Assure Proper Warranty Coverage.
THIS PRODUCT CARRIES A LIMITED EIGHT (8) YEAR WARRANTY FOR PARTS ANO LABOR PLEASE CALL 1-800-874-6625 OR VISIT WWW.HOMAK.COM FOR WARRANTY OR PART REPLACEMENT QUESTIONS
Hornak Manufacturing
1605 Old Route 18 Suite 4-36
Wampum, PA 16157
CustomerCare@Homak.com
1-800-87 4-6625
www.Homak.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>