NXP OM-SE051ARD-H EdgeLock SE051H Arduino Compatible Development Kit User Guide
- June 9, 2024
- NXP
Table of Contents
NXP OM-SE051ARD-H EdgeLock SE051H Arduino Compatible Development Kit
Get to know the OM-SE051ARD-H board
Please visit www.nxp.com/SE051H for more
information.
| Jumper | Description | Configuration | Default |
|---|
J6, J7
| ****
Antenna
| 1-2: via DB15 connector 2-3: Internal antenna| J6 1-2, J7 2-3
(no antenna)
J9, J10
| ****
I2C Master pull up connection
| Open: not connected 1-2: 3k3 Ohm| Open
J12
| ****
Reset
| 1-2 RST on J11:3
2-3 RST on Arduino
| ****
2-3
J13
| ****
SE051_ENA pin routing
| 1-2: ENA low, VOUT not connected to VIN 2-3: ENA controlled by Arduino pin J1:6| ****
2-3
J14
| ****
SE051_VCC pin routing
| 1-2: Routed to VDD supply voltage (see J19)
3-4: Routed to SE_Vout pin
5-6: Routed to J11:4 pin
| ****
1-2
J15
| ****
I2C Slave SDA connection
| 1-2: Arduino R3 J4:5 3-4: Arduino R3 J2:9| ****
3-4
J16
| ****
SE051_Vin supply
| 1-2: Supplied by J11:2 pin
2-3: Supplied by the VDD (see J19)
| ****
2-3
J17
| ****
I2C Slave SCL connection
| 1-2: Arduino R3 J4:6 3-4: Arduino R3 J2:10| ****
3-4
J18
| ****
SE051_IO2 routing
| 1-2: Routed to J11:9 2-3: Routed to J2:3| 1-2
J19
| ****
VDD supply voltage
| 1-2: From LDO
2-3: From 3V3_ARD pin
| ****
2-3
| | 1-2: From 5V_PC (USBI2C flat connector) 3-4: From 5V_DB15 pin
5-6: From 5V_ARD pin
| 1-2
J24| VDD supply selection for LDO (if LDO is used – see J19)|
J37, J38
| I2C Slave bus pull up configuration| Open: 3k3 Ohm (I2C fast mode)
1-2: 660 Ohm (I2C high speed mode)
| Open
Connect OM-SE051ARD-H to i.MX 8M board MCIMX8M-EVK
Connect OM-SE051ARD-H to i.MX 8M Mini 8MMINID4-EVK
Connect OM-SE051ARD-H to i.MX 8M Nano 8MNANOLPD4-EVK
EdgeLock SE051H
Visit www.nxp.com/SE051H for more information about the SE051H product range.
SUPPORT
Visit www.nxp.com/support for a list of phone
numbers within your region.
WARRANTY
Visit www.nxp.com/warranty for complete warranty information
Get Started
Download installation software and documentation at
www.nxp.com/SE051H
Reference documents: nxp.com: AN13539, OMSE05xARD Hardware
Overview
www.nxp.com/SE051H
NXP, the NXP logo and EdgeLock are trademarks of NXP B.V. All other product or
service names are the property of their respective owners.
© 2023 NXP B.V.
Part Number : OM-SE051ARD-H
PLUG & TRUST DEVELOPMENT PLATFORM
References
- EdgeLock SE051H | IoT Secure Element for Matter Onboarding via NFC | NXP Semiconductors
- Support | NXP Semiconductors
- Returns and Warranty Information | NXP Semiconductors
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>