DGE PRO Magnetic Wireless Charger User Manual
- June 9, 2024
- DGE
Table of Contents
DGE PRO Magnetic Wireless Charger User Manual
Product Show
Product diagram:
- magnetic wireless charger
- clamp
- Name: Magnetic Wireless charger
- Model: EDGE PRO-Wireless Charger
- Material: Aluminum alloy+silicone+magnet
- Input: ;=9V-2A /5V-3A/12V-1.5A
- Output : 15W/10W/7.5W/5W
- size: 56568mm
- Packing size: 1357018mm
- Packaging List: Magnetic Wireless charging fl, clamp, Manual*1
Instructions For Use
- Please connect the wireless charging device to a charger or car charging head that meets the requirements of CCC certification before using. To achieve fast charging efficiency, please use PD18W or USB/QC3.0 fast charger for power supply
- iPhone12 、iPhone13 and iPhone14 series mobile phones can be charged directly by magnetic attraction
- iPhone12 、iPhone13 and iPhone14 series mobile phones are equipped with a magnetic protective cover (ensure that the protective cover conforms to Apple’s magnetic standard), which can be charged directly by magnetic suction.
- Others support Qi wireless charging mobile phones, you only need to align the center point of the wireless charging coil to charge when placed flat.
- Others support Qi wireless charging mobile phones, if you need to experience the magnetic attraction function, you need to paste a special iron ring or magnetic sheet on the back of the mobile phone to achieve the magnetic attraction function.
Cautions
- Please confirm whether your mobile phone supports wireless charging, otherwise it will not charge your mobile phone
- Please do not put magnetic objects such as metal/magnetic sheet/credit card on the back of the phone or the phone case, otherwise it will cause failing to charge.
- Do not use a mobile phone case thicker than 2mm, otherwise it will not be magneticallyattracted and the charging efficiency will be affected
- Do not use this product in a high temperature or humid environment to avoid malfunction, damage or leakage
- Do not splash water or other liquids on the wireless charger. If you need to clean it, make sure to disconnect the power.
Certificate of conformity
Inspector This product has passed the inspection
Warranty Card
- Product Number.
- Inspector
- Inspection Date:
**SYMBOLS
**
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.
Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television reception， which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>