BOSCH BCPA8 Multimedia Player (no CD/DVD) 10.1 Inch Touchscreen Bluetooth User Manual

BCPA8
USER MANUAL
BLUETOOTHE) I 340 WATTS I SINGLE-DIN
MP3-COMPATIBLE DIGITAL MEDIA AM/FM RECEIVER
FEATURING 8″ (203 mm) CAPACITIVE TOUCHSCREEN
AND MULTICOLOR ILLUMINATION OPTIONS

BCPA8 Multimedia Player (no CD/DVD) 10.1 Inch Touchscreen Bluetooth

Thank you for Choosing BOSS Audio Systems!
IMPORTANT! Fill Out And Keep For Your Records.
IMPORTANT
Record the serial number of the product:
Model:
Serial Number:
Date of Purchase:
The serial number is located on the top part of the chassis.

Important

This symbol with “WARNING” is intended to alert the user to the presence of critical instructions/procedures. Failure to observe the instructions/procedures can result in injury, death, damage to the product and/or property.
WARNING
This symbol with “CAUTION” is intended to alert the user to the presence of important instructions/procedures. Failure to observe the instructions/procedures can result in injury or damage to the product and/or property.
CAUTION

Use of the Apple CarPlay logo means that this user interface meets Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this product with iPhone may affect wireless performance. iPhone®is a trademark of Apple Inc., registered in the U.S. and other countries. Apple CarPlay is a trademark of Apple Inc.
Android Auto is a trademark of Google LLC. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by BOSS Audio Systems is under license. Other trademarks and trade names are those of their respective owners.

Caution
Precautions
BE SURE TO OBSERVE THE FOLLOWING GUIDELINES: Do not turn up the volume so high that you can’t hear what’s around you. Use caution or temporarily discontinue use in potentially hazardous situations. Do not operate mobile video equipment while driving a motorized vehicle — safe driving and safety consideration of others should always be your highest priority. Set your volume control at a low setting, then slowly increase the sound until you can hear it comfortably without distortion, or ear discomfort. In the event you should notice smoke, strange noises or odor from this product, or any other abnormal signs, immediately turn off the power and consult your dealer or the nearest authorized BOSS AUDIO SYSTEMS Service Center. Using this product in this condition may result in permanent damage to the system.
Installation Precautions
BOSS AUDIO SYSTEMS does not recommend to install the product yourself. We recommend to have it professionally installed by a certified professional. Always consult with a professional installer . Do not attempt to install or service this product by yourself. Installation or servicing of this product by persons without professional training and experience in electronic equipment and motorized vehicle accessories may be dangerous and could expose you to the risk of electric shock, injury or other hazards.
Refer any repairs to a qualified BOSS AUDIO SYSTEMS Service Center.

Before Installing
To avoid potential shorts in the electrical system, be sure to disconnect the H battery cable before installation. Use this unit with a 12-volt battery and negative grounding only. Failure to do so may result in a fire or malfunction.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRICL SHOCK, DO NOT REMOVE COVERS. NO USER SERVICABLE PARTS INSIDE. REFER SERVICING TO A QUALIFIED SERVICE PROFESSIONAL.

Product Safety
It is against Federal and Local laws for video to be viewed by the driver while the vehicle is in motion. This video product was intended to be used with the parking brake safety feature. Video cannot be seen without the proper parking brake powered connection. Tampering or disabling this feature will void any and all warranty. Please check with a professional installer to have your product installed properly.
Important Note
Due to ongoing enhancements, example images on screens may slightly di r from actual product.

Images and Video
Watching video while driving is against Federal, State, and Local laws. Drive safely, know and obey traffic rules. Watching this screen and making selections while driving can lead to a serious accident. Check surroundings for safety while camera images are displayed.
Do not use features of this product while driving if it cannot be operated safely and legally in your location. Before operation of smartphone Apps accessible from this device, read safety instructions in your Owner’s Manual. When using navigation Apps stay alert to observe real world conditions.
About this manual
To entirely understand how to properly use your new BOSS Audio Systems product, it is recommended to read this user manual, and keep it in a safe place for future reference.
-Read the entire manual
-Keep the manual
-Follow all instructions
-Clean with a dry cloth only
-Do not use or operate near water
-Do not defeat any safety features
California Residents (Proposition 65)
This product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

Basic Product operation

What comes in the box
Hardware

Connections
Qty 1| Power/Harness
Qty 1| Hands-free Microphone

Front Detail

1. Menu Button
   Touch to switch between the home menu and the last selected source.

2. Voice Control
   Touch to activate then say command. Apple CarPlay or Android Auto must be active to enable voice control.

3. Power/Volume Knob
   • Press to turn the unit on; press and hold to turn the unit off.
   • Press briefly to mute or restore volume.
   • Rotate to increase or decrease volume.

4. MODE Button
   Touch to select a system mode.

5. Phone Button
   • Answer or dial a Bluetooth phone call.
   • End or reject a Bluetooth phone call.

6. Reset Pinhole
   Press with a pin to restore the factory settings. Reset the unit when it has no response.

Rear Detail

Unit Installation

THE UNIT IS INSTALLED TO BE AN ANTI-THEFT ONE. THE CHASSIS OF THE UNIT WEARS A SLIDING METAL HOUSING. PLEASE DO THE CONNECTION OF THE POWER, SPEAKERS AND ANTENNA ACCORDING TO THE REQUIREMENT OF THE INSTRUCTION BOOK , THEN INSTALL THE SLIDING METAL HOUSING IN THE CAR AS FOLLOWS.

Operation instruction

Basic product Operation-CAUTION!

Display screen removal

Using and Caring for the Touchscreen

Use:
This head unit utilizes a Capacitive Touchscreen, the same type that is used on high-end mobile devices. It should be used for and cared for like that type of device. As with all capacitive type technology, if your fingers are wet or sweaty, it will not function properly.
Do not allow any sharp objects to come in contact with the screen glass.
Care and Cleaning:
To clean the screen, use a dry microfiber type cloth to clean. Do not use ammonia, window cleaner, or any other type of household chemicals to clean the screen. Abrasives should not be used at all.

Product Setup (Date & Time)

Setup Option A: CarPlay Method
Connect your Apple® device using a Lightning® cable. The CarPlay USB port must be used.
This will automatically setup the time and date.
User must set Time Zone manually.
Default is Pacific Time Zone.

Setup Option B: Date and Time

Additional Setup
General > Language
Audio > EQ, Other Audio Settings
Display > Illumination, Brightness

Navigating the Menus

Apple CarPlay

Using CarPlay
Note
Apple CarPlay usage is limited while driving. Functions, contents, and usability is determined by the App provider(s). Controls will vary with each App that is available for CarPlay. For more details visit: http://www.apple.com/ios/carplay
WARNING
Familiarize yourself with your Local and State laws regarding mobile devices. Certain functions of an iPhone might be prohibited and or illegal while driving in your location.
When in doubt, park the vehicle and engage the parking brake first before performing the function(s).

Connecting to CarPlay USB Port

1. Connect the CarPlay compatible device via Lightning® cable (not included).
2. The iPhone will load the CarPlay function.
3. On the display, the CarPlay will illuminate green, touch it to enter the CarPlay menu.
4. To return to the product Home menu,
   Touch

NOTE
The product’s Bluetooth will turn OFF automatically when CarPlay is in use. Hands-free phoning will function through the CarPlay feature. When using CarPlay, there is no need to pair your iPhone, the USB cable connected through the USB Port (1) will enable this feature. If other devices are connected via Bluetooth, they will be disconnected for the duration of CarPlay use.

Gestures & Control
Basic controls, but not limited to:

Other gestures and controls might di er on each App.
NOTE
Volume control is handled exclusively by the product.

Using CarPlay

CarPlay Display Setup

1. Using your iPhone: Settings > General > CarPlay
2. Touch and Hold each App icon to move.
   To remove an App, Touch

NOTE
Only Apps with the icon can be removed from CarPlay.
Only Apps with the icon can be added in carplay.

How to Disable Apps

1. Using your iPhone:
   Settings > Notifications > App to Disable

Android Auto

Using Android Auto

Note
Android Auto usage is limited while driving. Functions, contents, and usability is determined by the App provider(s). Controls will vary with each App that is available for Android Auto. For more details visit: https://www.androidscom/auto/
WARNING
Familiarize yourself with your Local and State laws regarding mobile devices. Certain functions of the mobile device might be prohibited and or illegal while driving in your location. When in doubt, park the vehicle and engage the parking brake first before performing the function(s).
NOTE
To complete the setup properly, the Parking Brake status wire must be connected.

WARNING
For your safety, the setup process MUST be accomplished while the vehicle is Parked and Parking Brake Engaged.
Android Auto App
1. For Android 9.0 or earlier, download and install the Android Auto app from Google Play. For smartphone with Android 10.0 or later, plug in your phone and follow the prompts on your phone to accept the permissions that Android Auto requires.

Minimum Requirements:
Android 6.0
For a list of compatible devices:
https://www.android.com/auto/
Updating Related Apps

1. During the first start up and setup of the Android Auto app, the Maps, Music, Google apps will install/update automatically.

Connecting to Android Auto USB Port

1. Connect the Android compatible device via the appropriate USB cable (not included).
2. The Android device will load the Android Auto function.
3. Bluetooth will connect automatically when the setup is completed.

Android Auto Permissions Permissions
Several features can be allowed or denied access to customize your usability of the product. The access can always be modified in Settings on the Android device.

Bluetooth®

Setup & Connection
Hands-Free Menu

NOTE
CarPlay or Android Auto must not be active. If being used, disconnect the device to start Bluetooth. Compatibility with all mobile devices is not guaranteed. Please read through the user guide of the mobile device.
CAUTION
For your safety, the setup process should be accomplished while the vehicle is parked and parking brake engaged.
First time Pairing
Using your phone,media or other Bluetooth device, try to connect to this headunit.

Mobile Device:
Search for BOSS AUDIO BCPA8 iOS Devices: Settings > Bluetooth Android Devices: Settings > Connections > Bluetooth
A passcode is generated and will display on both the head unit and mobile device for secure pairing.
Touch to confirm
Every time the product is powered ON, the mobile device will automatically connect if within range.
NOTE
Once paired and connected, the device list will display the available Bluetooth profiles.

Phonebook and History
To Download Phonebook:
1. Touch Contact > Download
To Download History
1. Touch History > Download
Device Status
Battery and Cellular Strength is displayed on the top right of the Home menu. GATT Profile support is required on the mobile device.

Hands-Free

Calling
Making & Receiving Calls

1. Dialing from the dial pad
   Touch to make call

2. Contacts
   Touch the contact name

3. History
   Choose the name, then
   To End a call Touch
   To Mute a call Touch

Dial pad
To use the dial pad while on a call
Touch
Searching History
Swipe Up or Down to search
History

1. Outgoing Call
2. Incoming Call
3. Missed Call

Private Mode
When a call needs to be transferred to the mobile device:
Touch to switch the mobile device
Touch   to return to hands-free mode

Searching Contacts
Contacts must be downloaded to search.

1. **** Touch
2. Enter the Contact Name, then

Connection: ON
Auto Connect: ON
Auto Answer: OFF
Device Name: BOSS AUDIO BCPA8
Clear Records

Audio

Audio Streaming
To play media through Bluetooth, the mobile device must be Paired and Connected to the BCPA8.

1. Touch

The music will play automatically.
Track Control

1. Play/Pause
2. Track Fwd / Rev
3. Swipe to Fwd/Rev

Note
For best performance, your mobile device volume setting should be set to maximum. All volume adjustments for the system should be controlled from the product. The unit will recall the last volume setting on your mobile device every time Bluetooth connection is made.
Formats
Playback is supported from the mobile device with any format it can play. Audio will only be played by the product. Video cannot be viewed on the unit.
Switching Media
Touch
Available sources will display (Bluetooth and USB)
Note
USB source will only be displayed if a USB drive is inserted and has playable media.
Display
Track info will be displayed when available. Track, Album and Artist. Album art is not supported via Bluetooth playback.

Media

USB
USB Playback
Touch

The music will play automatically.
Audio Control

1. Play/Pause
2. Track Fwd / Rev
3. Repeat ALL
4. Repeat One
5. Random

Note
If there are other files in the U513, music files will play first.

Video Control

1. Play/Pause
2. Track Forward/Backward
3. Repeat All
4. Repeat one
5. SETUP

Photo Control

1. Play/Pause
2. Track Forward/Backward
3. Repeat All
4. Repeat One
5. Rotate

Navigating Menu
Touch

To browse contents, Swipe
To return to the current file playing,
Touch
WARNING
Watching videos or photos while driving is against Federal ,State, and Local laws. Do not use features of this product if it cannot be operated safely and legally in your location.
Note
Review the connections of this product, to properly integrate the parking brake wire to the vehicle. Video and or photos cannot be viewed while driving. The vehicle must be stationary and the parking brake applied to enable viewing.

AM/ FM
Controls
Touch
Tuning
To search for stations:
Search
Touch and Hold
Manual Seek
Touch
Auto Search & Store: Touch

Band & Settings
Touch FM to switch bands
To change radio settings
Touch
Favorites and Presets
Settings Favorites
Touch
Favorite Set

To remove a favorite, Touch
Browsing Favorites
Touch
To return the Tuner screen Touch
Changing Presets
Touch
To list all Stored Stations
Touch
Stereo/Mono
To turn on/off stereo when receiving a stereo signal,
Touch
LOC/DX To select Local or Distant broadcasting stations,
Touch

AV In/Camera

External Source

Playback
Touch

Media must be controlled from the external device.
Track functions are not controlled from the product.
Note
To adjust the volume level properly, the carry-in device volume should be set between 50 %- 75%. The volume level should remain at that level for the remainder of the time it is connected to the product.
WARNING
Never rely solely on the rear view camera; always check your surroundings before proceeding.

Reverse View
When the vehicle is put into reverse gear, the camera will display the image on the screen.

Rear View Delay
Due to varying vehicle configurations, the rear view trigger can be delayed to best suit the vehicle.
Default setting: 0 Sec Delay
Note
The rear view camera will still function normally, if the product is in standby mode.

Settings

General
System Language
Touch to change
English (Default), Spanish

Note
CarPlay is independent of the system language setting.
Time Zone
Adjust to correctly display time Default Setting: (GMT-08:00) Pacific Time (US&Canada)
Date & Time
24H Mode

Auto Adjust Daylight Saving

Note
If using an CarPlay, the iPhone will automatically set date & time. Time Zone needs to be adjusted manually.
System Tone
Touch

Power Off Delay
Some vehicles during crank to start will interrupt the accessory power. If the product re-boots during crank to start, Turn ON delay The delay can select 1, 2 or 3 sec. Default Setting: OFF
Note
Power Off Delay ON will also delay when the vehicle is turned OFF.
This might affect hands-free functionality during a call.
Factory Settings
To restore settings to default:
Touch
CAUTION
Will restore all settings to factory defaults. All settings and presets will be lost.
General
System Language
Touch to change
English (Default), Spanish
Note
CarPlay is independent of the system language setting.
Time Zone
Adjust to correctly display time Default Setting: (GMT-08:00) Pacific Time (US&Canada)
Date & Time
24H Mode

Auto Adjust Daylight Saving

Note
If using an CarPlay, the iPhone will automatically set date & time. Time Zone needs to be adjusted manually.
System Tone

Power Off Delay
Some vehicles during crank to start will interrupt the accessory power. If the product re-boots during crank to start, Turn ON delay The delay can select 1, 2 or 3 sec. Default Setting: OFF
Note
Power Off Delay ON will also delay when the vehicle is turned OFF.
This might affect hands-free functionality during a call.
Factory Settings
To restore settings to default:
Touch
CAUTION
Will restore all settings to factory defaults. All settings and presets will be lost.

Audio
EQ
To access the EQ menu
Touch

Note
The EQ can also be directly accessed while changing the volume. The volume display will show the EQ icon, you can touch to access the Audio Settings.

Preset EQ
Jazz, HipHop, Pop, Rock, R&B
Balance/Fader
Left/Right Balance, Touch

Swipe for quick adjustment

Front/Rear Fader, Touch

Swipe for quick adjustment
Subwoofer
The level and filter can be adjusted for the Sub pre-amp output. Level, 1-14 dB
Swipe
Filter: 50 Hz, 80 Hz, 120 Hz, 160 Hz
Touch +/- to select a cutoff frequency for your subwoofer.
Loudness
Enhances and gently boosts low and high freq.
Touch

Internal Amp
To reduce the possibility of noise entering the signal chain when utilizing the audio pre-amp outputs, the internal amp can be turned OFF
Touch

Volume
Settings are for default volumes for Main (Radio, Media), Hands-free (BT Ring, BT Talking), Apple CarPlay / Android Auto (Navi, Voice).
Source Level
The source mode (Radio, USB, BT Audio, AV Input, Apple CarPlay, Android Auto) gain control.
Display
Illumination Control
Touch

When the vehicle lights are on, the products illumination can be customized for night use.
Gamma
Swipe
Gamma can be adjusted for both day and night settings.
Screen Brightness
Swipe
LED Touch Buttons
Panel Ligh
Touch
Six preset colors can be chosen for Touch buttons.
To select a preset color, make sure LED Animation feature is turned off.
LED Animation
Touch

Will cycle through all colors on LED touch buttons.
Default Setting: ON
Ul settings
Wall paper
Touch to change User can change the background picture by inserting a USB with photos.
Background Brightness
Swipe

Connection
Touch

Power On/Off Bluetooth
Default Setting: ON
Bluetooth
Note
Bluetooth will turn OFF automatically when CarPlay is in use. If other devices are connected via Bluetooth, they will be disconnected for the duration of CarPlay use.
Auto Connect
Touch

Auto connects to the device when the produc is powered ON Default Setting: ON
Auto Answer
Touch

Auto answers when there is an incoming call. Default Setting: OFF
Bluetooth
Device Name
BOSS AUDIO BCPA8
Rear Camera Input
Turn on if you have a rear view camera, turn off if you have not.
Front Camera Input
Turn on If you have a front view camera, turn off if you have not.
Parking Assist Guide
Turn off if your rear view camera have parking assist guide, turn on if you have not.
Camera
Parking Assist guide Adjust
If your rear view camera does not have parking guide lines, turn on the parking guide lines built in this unit and adjust the guide lines if found necessary.
Touch and drag a square icon to reposition the related guide line. Repeatedly touch an arrow icon to fine tune posiitoning of the related guide line. Touch the OK icon to confirm the adjustment. To reset to the default positoning of the guide lines, touch the Reset icon.
Radio

Rear View Delay
0 Sec (Default), 0.1 Sec, 0.5 Sec, 1 Sec, 2 Sec When switching from Park to Drive, or vice versa, the camera should not trigger on the display. Sensitivity should be adjusted to trigger only on reverse gear selector.
Region Touch
Default Setting: USA 2 US Tuner Spacing: FM (200 KHz), AM (10 KHz) European Spacing: I-M (SO KHz), AM (9 KHz)

Connection

Power/SWC

CAUTION
It is recommended to have the product installed by a certified installation professional.
CAUTION
Before installation, or wiring connections, disconnect the negative (-) battery terminal to prevent damage to the product, and/or possible injury.

CAUTION
Remote Out is 500 mA max output rating. If several amplifiers are to be used, it is recommended to use a relay for the Remote Out trigger.

Note
Unused input/output wires need be insulated with tape, heat shrink, or crimp connectors. Never use wire nuts.

Note
A separate interface might be needed for your vehicle application. It is recommended that you consult with a professional installer.
Note
When replacing the fuse, always do so with the same type and value (15 A).

Speakers

CAUTION
Do not chassis ground any speaker wire leads.
CAUTION
Only use 4-8 0 Speakers Do not use 1-3 0 Speakers
CAUTION
Do not bridge any of the channels, they are only to be wired in stereo mode.
Note
Unused speaker wires need be insulated with tape, heat shrink, or crimp connectors. Never use wire nuts.
If the speaker outputs are not used, turn Off the internal amp to reduce the possibility of noise entering the signal chain.
Note
Observe speaker polarity when making connections.

Audio Pre-amp/AV IN/ Radio

Note
Subwoofer Pre-amp is a non-fading mono output.
Note
Always run signal wires away from power cables to reduce the possibility of noise.

Note
If pre-amp outputs are being used exclusively, turn O the internal amp of the product, to reduce the possibility of noise entering the signal chain.

Camera/USB/MIC
WARNING
Never rely solely on the rear view camera;  always check your surroundings beforeproceeding.
Images may appear reversed
Do not use a feature of this product if it cannot be operated safely and legally in your location.

Parking Brake

WARNING
Improper connection or use of the parking brake status wire, (i.e. defeating the safety feature) violates Federal, State, and Local laws. This may lead to injury, property damage, and/or death.
WARNING
Watching videos or photos while driving is against Federal, State, and Local laws.
Note
For Android Auto setup, the parking brake status wire MUST be connected.
Note
Review the connections of this product, to properly integrate the parking brake wire to the vehicle. Video and or photos cannot be viewed while driving. The vehicle must be stationary and the parking brake applied to enable viewing.

Note
The parking brake input needs to be connected to the parking brake wire.
Note
Every vehicle has a different type of parking brake connection; consult a certified professional installer.

Hands-free Mic
Placement
Every vehicle will perform differently due to layout, interior materials, etc.
The Red shaded areas are the recommended locations for best microphone performance.
Items to look for before placement:

1. Do not place in front of air vents.
2. If the vehicle has tweeters placed on sail panels, do NOT locate the mic on steering column area.
3. Front of mic must not be blocked.
4. Mic should be firmly attached to mounting location.
5. Do not cover the grille openings surrounding the mic.
6. To avoid excessive wind noise, do not place near the sunroof opening

WARNING
Run microphone wire where it will NOT impede the operation of any safety items, i.e. Airbags, Knee Airbags, etc.

Steering Wheel Control Compatibility

SWC Introduction
Steering Wheel Control (SWC) function allows you to operate this unit via an external device (steering wheel control).
A third-party adapter must be used in order for this unit to be compatible with your OEM steering wheel controls. We recommend PAC SWC series.
This unit has a built-in 3.5mm SWC interface that is compatible with many popular 3rd party SWC control modules, such as PAC, METRA, and others.
3.5mm SWC input (black socket) is located on the supplied wire harness which is connected to the rear of the unit.

Programmable Controls
The following radio / audio function controls
are available to be programmed.
Source
Mute
Home
Seek + / Next Track
Seek – / Previous Track
Volume +
Volume Band
Phone Menu
Bluetooth Talk
Bluetooth End Call
Voice Assistant / PTT

Note
Not all OEM steering wheel functions may be supported.
Specifications are subject to change without notice.

SWC Installation / Programming
Contact your local installation expert for the correct SWC adapter for your specific vehicle.

1. For most SWC adapters, select program using “Pioneer/Sony/Other” mapping order as described in “Programmable Control”.
2. When programming, if a function is not supported (or not desired), then the function MUST be skipped as per the SWC module instructions.
3. The SWC function MUST be programmed in the correct order as per the function mapping order instructions.

Note
For SWC programming technical assistance, call the number in your SWC instruction manual.

Troubleshooting

Issues
No Sound| Cause
Internal amplifier is off Product is muted
External amplifiers Audio source| Solution
Go to Settings > Audio > Internal Amp ON. Touch the volume.
Check the external amplifiers are on. Check the remote output wire has voltage. Change the audio source.
---|---|---
Media Not Supported| Media on USB flash drive| Change the media format on the USB device. Change the USB device.
Poor Radio Reception| Radio area Antenna| Change the station.
Antenna output wire is not connected. Connect Antenna to product.
Apple CarPlay/Android Auto will not start| Bad Lightnine/USB cable Locked device
Not charged CarPlay/Android Auto frozen| Replace the cable.
Device needs to be unlocked.
Device needs to be powered ON for CarPlay/ Android Auto to function. Allow it to charge and power on.
Unplug the device, close all Apps and plug it in again.
Bluetooth| Not connecting to device| Make sure the device is within range.
Device’s Bluetooth connection needs to be turned ON.
Issues
Bluetooth| Cause
Not connecting to device| Solution Go to Setting >Connection >Power ON Pair and Connect the device like new.
---|---|---
Hands-free call quality| Mobile device Microphone| Check cellular strength on mobile device. End call and redial number.
Microphone placement needs to be relocated.
Microphone needs to be firmly attached to location it’s mounted on.
Check to see if microphone is properly plugged in.
Unit is unresponsive| Processor has frozen| Restore the factory settings. Use a small pin to
press the reset pinhole on the bottom of the display.

Specifications

General
Power Input………………………….. 8.5 V-18 V DC
Nominal………………… 14.4 V DC
Current Consumption……………………… 15A
Fuse Type………………………………….. 15A
Dimensions (H x W x D)………… 1.97″ x 7″ x 4.9″
Unit Weight………………………….. 3.911bs.
Operational Temperature……………. -4-140°F
Display
Screen Size…………………………………… 8″
Aspect Ratio……………………………….. 16:9
Resolution………………………………….. 1024 x 600
Screen Type…………… TFT-LED Active Matrix
Audio
Max Power…………………………… 85 W x 4
Acceptable Speaker Load………………… 4-8 0
Preset EQ……………………………………… 5
JAZZ, HIPHOP, POP, ROCK, R&B
EQ Bands, Adjustable………………………… 10
32, 63, 125, 250Hz, 500Hz 1KHz, 2KHz, 4KHz, 8KHz, 16KHz
EQ Boost/Cut                                  + 6 dB
Audio Cont’d
Pre-amp Output…………………………. 3 Pairs
Front……………….. 4V, Full-Range
Rear………………… 4V, Full-Range
Sub (Mono)……………….. 4V, LPF
Sub LPF………… 50 Hz, 80 Hz, 120 Hz, 160 Hz
Sub Level………………………………………. +1-14dB
Radio Tuner
Freq. Range………… 87.5 MHz-108 MHz (FM)
Freq. Range…………. 522 kHz-1710 kHz (AM)
USA 1 Range (FM)………………… 100 kHz Spacing
USA 2 Range (FM)………………… 200 kHz Spacing
Europe Range (FM)………………… 50 kHz Spacing
Apple CarPlay
iPhone Support……………. iPhone 5 or Newer
iOS…………………………… iOS 7.1 or Newer
Android Auto
Android………………… Android 6.0 or Newer
USB
USB Spec……………………. USB 2.0 (High-Speed)
USB Port 1: Carplay & Android Auto………….
Current Output 1.5A
USB Port 2: Media & 1.5A Charging…………..
Current Output 1.5A
USB mass storage size……………………. max 32GB
File System………………………………. FAT32
Audio Playback………….. MP3, WMA, WAV, FLAC
Video Playback…………………….. AVI, MKV, WMV
Picture Playback………………… NG, PNG, BMP
*Not all listed compressed files guaranteed to play due to different creation methods or file contents.
Bluetooth®
Version……………………………. v4.2+E.D.R.
Audio Codec…………………………….. S.B.C.
Profiles…………………………………………..HFP v1.6, A2DP v1.2, AVRCP v1.5, PBAP v1.1

Specifications are subject to change without notice.

If you have questions about this product: Customer Service 805-751-4853 M-F 8:30a-5:00p (PST) Tech Support: www.bossaudio.com/support/technical- support
© 2022 BOSS Audio Systems
BOSS Audio Systems 3451 Lunar Court • Oxnard, CA 93030 www.bossaudio.com 805-751-4853 Customer Service Tech Support: www.bossaudio.com/support
0522

iPhone is a trademark of Apple Inc., registered in the U.S. and other countries. Apple CarPlay is a trademark of Apple Inc. BOSS Audio Systems is not affiliated with Apple Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by BOSS Audio Systems is under license. Other trademarks and trade names are those of their respective owners Android Auto is a trademark of Google LLC. Use of the Apple CarPlay logo means that this user interface meets Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this product with iPhone may affect wireless performance.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>