Course 835326 Smart Cordless Electric Mop Instruction Manual
- June 9, 2024
- Course
Table of Contents
Course 835326 Smart Cordless Electric Mop Instruction Manual
SAFETY PRECAUTIONS
Please read this anualcarefully
- In order to prevent injury and property damage, please read this manual carefully and avoid misuse.
If you use the product in an incorrect way or ignore the contents of this manual, it may cause serious damage and injury. Please pay attention to the following instructions.
⚠ WARNING This symbol means that if the content or action is not followed, it may cause serious injury.
⚠ ATTENTION This symbol means that if the content or action is not followed, it may cause property damage or other injuries.
- Please abide by the following pictures and text.
Indicating prohibition, please refer to the manual for details.
It is strongly recommended to do so, please refer to the manual for details.
When the product leaves the factory, 10-50% of the power is generally reserved. It is recommended to charge the product firstly to ensure the use effect. It takes about 2.5-3 hours to fully charge at room temperature. The actual charging time varies according to the environment.
PARTS OF THE PRODUCT
HOW TO USE
Guidance
-
Filling water:
Take out the water tank, open the silicone cover, fill it with clean water, and close the silicone cover.
-
Put the water tank back into the mop body, and press it to be parallel to the mop body as the below picture shows.
Turn on/off
- When you put down the pole by the handle, you will hear a click to activate the product: short press the power button on the handle to turn it on, the product will start working as the below picture shows.
- After the power is turned off, please restore the pole to an upright state, and a click will be heard when it is upright.
- When the pole is lying flat or not upright, if there is no operation for 30 minutes, the product will goes into sleep state. To start the working, the pole needs to be upright first, then put down to activate, and short press the power button to turn on. If the mop product is not using, the mop pole should be in an upright state to keep well.
MAIN FUNCTION
TROUBLESHOOTING
- Something goes wrong? Before you want to fix it, try the following methods to solve it.
Specification
Maintenance
The product body cannot be inset in water, otherwise the internal parts of the product will be damaged
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>