DZOFILM Vespid Prime Cine Lens User Manual
- June 9, 2024
- DZOFILM
Table of Contents
DZOFILM Vespid Prime Cine Lens User Manual
Note
Click to go Users can read the table of content(TOC) to have an overview of
the Vespid Product Manual. Please click on the title or link to jump to the
TOC
Search keyword The Search-keyword Function is available in PDF Document. For example, In WPS Office, Windows users can search keywords with the keyboard shortcut <Ctrl+F> and Mac users can execute the same function with shortcut <Command+F>
Introduction
Thank you for purchasing this product! Vespid is DZOFILM’s high-performance full frame cinema prime lens. It allows you to reproduce the details and color in filming. Clear images, natural transition from in-focus to defocus and minimal breathing in focusing…all these can be found in Vespid. A good companion for your documentary/ TVC/ MV/ commercials/ online movie/ variety show/ Live/ independent films, etc.
Safety Notes
- Please do not watch the sun or bright light source through the lens, otherwise it will cause visually disabled
- Never use organic solvents such as paint thinner or benzene to clean the lens
- Attach the front and rear caps when the lens is not in use
- Store the lens and filter in cool, dry locations to prevent mold and rust. Do not store in direct sunlight or with naphtha or camphor moth balls
- Please keep the lens dry and wipe the water droplets off if there are water droplets on the glass surface
- Leaving the lens near heater or in other extremely hot locations could cause damage or warping
- Use a blower to remove dust and lint from the glass surfaces of the lens or filter. To remove smudges and fingerprints, apply a small amount of lens cleaner to a soft, clean cotton cloth or lens-cleaning tissue and clean from the center outwards using a circular motion. Do not leave smears or touch the glass with your finger.
Lens Parts
- Front Cap
- Lens Mark
- Focusing Ring
- Aperture Ring
- Rear Cap
Lens Control
Focus Control
Rotate the focus ring to increase or decrease the focus distance.
Aperture Control
Rotate the aperture ring to stop aperture down, raising the T-stop and
narrowing the aperture, or lower the T-stop to widen the aperture.
Flange Back Adjustment
Every Vespid lens will process flange back adjustment on standard. But due to the tolerance of different cameras, to achieve the best performance of this product and to match the cameras, please adjust flange back of the product.
1. Preparation
Take Vespid 50mm as an example:
Step One : Ready your subject and calibration tool. You can use a “Star
Chart”, or other high-resolution black-and-white objects; download the “Back
focus Calibration Tool for Prime Lens”(short for “Calibration
Tool”) on the official website.
Note : You can download and print the chart on DZOFILM website-Download-Star
Chart for Adjusting Back Flange Click to jump to the
website
Step Two : Attach the lens to the camera and adjust the aperture to T4;
Step Three : Make the pointer align with the 1.6m scale on focusing ring,
paste calibration tool on the ring with middle line of the tool aligning the
1.6m scale and the scale pointer (or choose 5′ focusing scale).
Step Four : Set the object 1.6m away from the camera sensor plane, and adjust
it to the center of the whole image. T4 Aperture
2. Flange Back Adjustment
Please adjust as the following steps: Step One : Rotate the focus ring until
the image to its clearest. Take the horizontal line in the middle of the
calibration tool as the reference and observe the position of the deviating
scale pointer to get the number of horizontal lines.
Note: The direction of infinity indicates positive deviation value.
The direction of the closest focusing distance indicates negative deviation
value. If there are more than three horizontal lines, add or subtract the
corresponding value.
Example: If the scale pointer points to 3 spaces in the direction of the closest focusing distance, the deviation value is -3. If the scale pointer points to 4 spaces in the direction of infinity, the deviation value is +4. At this situation, the shim value of “+3” needs to be added to the shim value of “+1”. Step Two : According to the deviation value and the reference below, add or subtract the corresponding shim to complete the flange back adjustment.
Note: Shim adjustment: “+” means adding shims, and “-” decreasing shims. Data in this sheet might have deviation and just for reference. Please adjust based on actual situation.
Specification
After-sales Service
How to Obtain After-Sales Service
If a product does not function as warranted during the warranty period, you
may obtain after-sales service by contacting DZOFILM support team or DZOFILM’s
authorized dealers.Charges may apply for services not covered by this After-
Sales Policy. The After-Sales Policy varies with the country or region of
purchase. Please contact DZOFILM for information specific to your location.
Warranty Service
DZOFILM grants a minimum warranty period of one year from the date of purchase
for lenses purchased through DZOFILM’s official dealers. DZOFILM warrants that
each DZOFILM product that you purchase will be free from material and
workmanship defects under normal use in accordance with DZOFILM’s user manual
and accompanying documentation during the warranty period. You may claim
warranty service by returning it to the point of purchase. The owner is
responsible for all shipping costs. The warranty period varies with the
country or region of purchase. Stored dated receipts or other proof of
purchase in a safe place, as you will need to provide a valid proof-of-
purchase or receipt for the warranty service. Parts replaced during the
warranty service become DZOFILM’s property.
Service Outside the Warranty Period
Request for after-sales service will normally be accepted within a period of
roughly 5 years following the end of production, during which time spares will
be kept on hand, although owners may be offered an equivalent product during
this period in the event that spares are not available. The specific cost
standard is subject to DZOFILM’s quotation. Compatibility with consumables and
accessories for the original product is not guaranteed. To prevent waste,
DZOFILM may collect returned parts or products.
Service Turn Around Time
After we receive the product, the after-sales service will generally be
completed within two weeks. This turn around time does not include the time of
return shipping. If there are special circumstances, we will notify you in
advance.
What This After-Sales Policy Does NOT Cover
This after-sales policy does not cover the following and charges may apply:
× No valid proof-of-purchase or receipt of the product;
× Damage caused by unauthorized modification, disassembly, or repair not in
accordance with official instructions or manuals.
× Damage caused by improper installation and operation not in accordance with
official instructions or manuals.
× Damage caused by the storage environment not in accordance with official
instructions or manuals.
× Damage caused by operation in bad weather or environment (i.e. rain,
sand/dust storms, humid environment, etc.).
× Damage caused by, any third party products, including those that DZOFILM may
provide or integrate into the DZOFILM product at your request.
× Damage caused by any third-party product.
× Damage caused by force majeure;
× Consumable accessories and optional parts that come with this product.
Privacy
DZOFILM obeys all applicable laws and regulations concerning the handling of
names, addresses, phone numbers, and other personal information provided by
users.
The Name and Content of Hazardous Substances
Shenzhen Dongzheng Optical Technology Co., Ltd.
Floor 6, Building One, Xinwuxia Industrial Area, No.32, Cuibao Rd., Baolong
St., Longgang Dist., Shenzhen 518000, China
www.dzofilm.comhttps://www.dzofilm.com/http://weixin.qq.com/r
/EBONiSfEt_-LKWPqb0aU
WECHAT: DZOFILM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>