eWent EW7043 USB 3.2 Gen1 RAID Dual Hard Disk User Guide

June 9, 2024
ewent

eWent EW7043 USB 3.2 Gen1 RAID Dual Hard Disk User Guide

  1. Open the enclosure by sliding the covers

  2. Connect the hard disks to the SATA connectors

  3. Slide the covers back to close the enclosure

  4. Attach the EW7043 with the included cable to your computer

N For service, manuals, firmware

updates or support visit www.ewentonline.com | Multilingual manual | 5 Years Warranty |

USB 3.2 Gen1 RAID Dual Hard Disk

Quick Install | Snel installeren | Schnelle Installation | Installation rapide
| Installazione rapida | Instalación rápida | Gyors telepítés | Guia de instalação rápida

By default the jumpers are set to JBOD, choose your desired USB setup and change the HDD mode to RAID0, RAID1 BIG or keep it as JBOD, and set the jumper settings as
illustrated on the case and hold the “RESET” button until the corresponding LED lights up (also for the default setting JBOD). For an explanation of the different HDD modes
please refer to our online manual on our website www.ewent-online.com

For service, manuals, firmware updates or support visit www.ewentonline.com | Multilingual manual | 5 Years Warranty |

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals