CORSAIR RM750 50 Watt 80 PLUS Gold Certified Fully User Manual
- June 9, 2024
- Corsair
Table of Contents
- SAFETY AND PROTECTION
- RM750x SHIFT INCLUDED HARDWARE AND SPECIFICATIONS
- CORSAIR RM750x SHIFT POWER SUPPLY EFFICIENCY
- RM850x SHIFT INCLUDED HARDWARE AND SPECIFICATIONS
- RM1000x SHIFT INCLUDED HARDWARE AND SPECIFICATIONS
- RM1200x SHIFT INCLUDED HARDWARE AND SPECIFICATIONS
- CORSAIR RMx SHIFT SERIES CABLE INFORMATION
- INSTALLING YOUR NEW RMx SHIFT SERIES POWER SUPPLY
- Customer Support
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CORSAIR RM750 50 Watt 80 PLUS Gold Certified Fully
CONGRATULATIONS ON THE PURCHASE OF YOUR NEW CORSAIR RMx SHIFT SERIES ATX POWER SUPPLY!
CORSAIR RMx SHIFT Series fully modular power supplies deliver reliable 80 PLUS Gold efficient power to your system.
SAFETY AND PROTECTION
-
Over-Voltage Protection (OVP)
Over-voltage protection for the 12V, 5V, and 3.3V DC outputs is required to comply with the ATX specification. OVP shuts down the PSU in the event that the DC outputs exceed a set level, determined by the PSU manufacturer. -
Over-Current Protection (OCP)
OCP is featured on the 3.3V, 5V, and 12V rails. OCP ensures that the output of the DC voltage rails remains within safe operating limits. -
Over-Temperature Protection (OTP)
OTP ensures that the PSU will shut down when the internal temperature reaches a set point. This is usually as a result of internal current overloading or a fan failure. -
Short-Circuit Protection (SCP)
A short-circuit is defined as any output impedance of less than 0.1 ohms. Amongst other things, SCP ensures that the PSU shuts down should the 3.3V, 5V, and 12V rails short to any other rail, or to ground. It also ensures that no damage should occur to the unit, or your PC’s components in the event of a short. -
Over Power Protection (OPP)
Over power protection shuts off the PSU when the power drawn is between 115% and 135% of the rated power. -
Catastrophic Failure Protection
PSU must have protection circuitry to shut down safely to prevent damage from any catastrophic failures such as flame, excessive smoke, charred PCB, fused PCB conductor, startling noise, emission of molten material, etc.
RM750x SHIFT INCLUDED HARDWARE AND SPECIFICATIONS
Dimensions: 160mm(L) x 150mm(W) x 86mm(H)
Package Contents: Power Supply, AC Cable, DC Cables, Cable Ties, Mounting
Screws, Safety Leaflet
| CORSAIR RM750x SHIFT POWER TABLE | MAX LOAD | MAX OUTPUT |
|---|---|---|
| MODEL | RPS0159 | +3.3V |
150W
PART NO.| 75-005190| +5V| 20A
FREQUENCY| 47 – 63Hz| +12V| 62.5A| 750W
INPUT CURRENT| 10 – 5A| +5Vsb| 3A| 15W
AC INPUT RATING| 100 – 240V a.c.
TOTAL POWER: 750W
CORSAIR RM750x SHIFT POWER SUPPLY EFFICIENCY
- SYSTEM LOAD (%)
CORSAIR RM750x SHIFT POWER SUPPLY FAN NOISE CURVE
- POWER OUTPUT (W)
RM850x SHIFT INCLUDED HARDWARE AND SPECIFICATIONS
Dimensions: 160mm(L) x 150mm(W) x 86mm(H)
Package Contents: Power Supply, AC Cable, DC Cables, Cable Ties, Mounting
Screws, Safety Leaflet
| CORSAIR RM850x SHIFT POWER TABLE | MAX LOAD | MAX OUTPUT |
|---|---|---|
| MODEL | RPS0160 | +3.3V |
| PART NO. | 75-005191 | +5V |
| FREQUENCY | 47 – 63Hz | +12V |
| INPUT CURRENT | 10 – 5A | +5Vsb |
| AC INPUT RATING | 100 – 240V a.c. |
TOTAL POWER: 850W
CORSAIR RM850x SHIFT POWER SUPPLY EFFICIENCY
- SYSTEM LOAD (%)
CORSAIR RM850x SHIFT POWER SUPPLY FAN NOISE CURVE
- POWER OUTPUT (W)
RM1000x SHIFT INCLUDED HARDWARE AND SPECIFICATIONS
Dimensions: 180mm(L) x 150mm(W) x 86mm(H)
Package Contents: Power Supply, AC Cable, DC Cables, Cable Ties, Mounting
Screws, Safety Leaflet
| CORSAIR RM1000x SHIFT POWER TABLE | MAX LOAD | MAX OUTPUT |
|---|---|---|
| MODEL | RPS0161 | +3.3V |
150W
PART NO.| 75-005192| +5V| 20A
FREQUENCY| 47 – 63Hz| +12V| 83.3A| 1000W
INPUT CURRENT| 12 – 6A| +5Vsb| 3A| 15W
AC INPUT RATING| 100 – 240V a.c.
TOTAL POWER: 1000W
CORSAIR RM1000x SHIFT POWER SUPPLY EFFICIENCY
- SYSTEM LOAD (%)
CORSAIR RM1000x SHIFT POWER SUPPLY FAN NOISE CURVE
- POWER OUTPUT (W)
RM1200x SHIFT INCLUDED HARDWARE AND SPECIFICATIONS
Dimensions: 180mm(L) x 150mm(W) x 86mm(H)
Package Contents: Power Supply, AC Cable, DC Cables, Cable Ties, Mounting
Screws, Safety Leaflet
| CORSAIR RM1200x SHIFT POWER TABLE | MAX LOAD | MAX OUTPUT |
|---|---|---|
| MODEL | RPS0162 | +3.3V |
| PART NO. | 75-005193 | +5V |
| FREQUENCY | 47 – 63Hz | +12V |
| INPUT CURRENT | 15 – 7.5A | +5Vsb |
| AC INPUT RATING | 100 – 240V a.c. |
TOTAL POWER: 1200W
CORSAIR RM1200x SHIFT POWER SUPPLY EFFICIENCY
- SYSTEM LOAD (%)
CORSAIR RM1200x SHIFT POWER SUPPLY FAN NOISE CURVE
- POWER OUTPUT (W)
CORSAIR RMx SHIFT SERIES CABLE INFORMATION
| DESCRIPTION | QTY |
|---|---|
| CONNECTORS | TOTAL LENGTH |
1200W
ATX Cable (24-pin)
| 610mm ± 10mm| 1| 1| 1| 1
EPS/ATX12V Cable 8 pin (4+4)
| 650mm ± 10mm| 2| 2| 2| 2
12VHPWR Cable (12+4) pin
| 650mm ± 10mm| 1| 1| 1| 1
PCIe Cable 8-pin (6+2)
| 750mm ± 10mm| 1| 1| 2| 2
PCIe Cable 8-pin (6+2)
| 650mm ± 10mm| 1| 2| 3| 4
SATA Cable (4 SATA)
| 800mm ± 10mm| 3| 3| 4| 4
PATA Cable (4-pin)
| 750mm ± 10mm| 1| 2| 2| 2
INSTALLING YOUR NEW RMx SHIFT SERIES POWER SUPPLY
STEP 1: REMOVING YOUR EXISTING PSU
Warning! To ensure proper function, only use the DC cables included with
your new PSU, unless your old cables are genuine CORSAIR cables of the same
type. Please confirm your existing cables’ type before using them!
If you are building a new system, skip to Step 2:
- Disconnect the AC power cord from your wall outlet or UPS and from the existing power supply.
- Disconnect all the power cables from your video card, motherboard and all other peripherals.
- Follow the directions in your chassis manual and uninstall your existing PSU.
- Proceed to Step 2.
STEP 2: INSTALLING THE NEW POWER SUPPLY
-
Make sure the power supply’s AC power cable is not connected.
-
Follow the directions in your chassis manual and install the power supply with the screws provided.
-
Connect the 24-pin (ATX) cable to the motherboard. Connect the 8-pin +12V (EPS12V) cable to the motherboard.
a. If your motherboard has an eight-pin +12V socket, connect the eight- pin cable directly to your motherboard.
b. If your motherboard has a four-pin socket, detach the four-pin from the eight-pin cable, and then plug this four-pin cable directly to your motherboard.
c. Some motherboards will require a mix of 8+4 pins, use as many EPS12V cables as necessary and do not mistake them for PCIe cables. -
Connect the peripheral cables, PCI-Express cables, and SATA cables.
a. Connect the SATA cables to your SATA SSD or hard drive’s power sockets.
b. Connect the PCI-Express cables to the power sockets of your PCI- Express video cards if required.
c. Connect the peripheral cables to any peripherals requiring a 4-pin connector.
d. Make sure all the cables are tightly connected. Be sure to save any unused modular cables for future component additions. -
Connect the AC power cord to the power supply and turn it on by pushing the switch to the ON position (marked with “I”).
Product Name : Power Supply
Model No: Refer to the table
| ITEM | MODEL NO. | KC EMC ID | KC SAFETY ID |
|---|---|---|---|
| RM750x SHIFT | RPS0159 | R-R-CSI-RPS0160 | ZU10314-22002 |
| RM850x SHIFT | RPS0160 | R-R-CSI-RPS0160 | ZU10314-22002 |
| RM1000x SHIFT | RPS0161 | R-R-CSI-RPS0161 | ZU10314-22003 |
| RM1200x SHIFT | RPS0162 | R-R-CSI-RPS0161 | ZU10314-22003 |
© 2022 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo
are registered trademarks of CORSAIR in the United States and/or other
countries. All other trademarks are the property of their respective owners.
Product may vary slightly from those pictured.
49-002630 AA
Customer Support
Web: corsair.com
Phone: 888-222-4346
Warranty:
corsair.com/support/wa.rranty
Support: support.corsair.com
Blog: corsair.com/blog
Forum: forum.corsair.com
YouTube: youtube.com/corsairhowto
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>