ACCLAFIT X2C Smart Watch Fitness Tracker User Guide
- June 9, 2024
- ACCLAFIT
Table of Contents
ACCLAFIT X2C Smart Watch Fitness Tracker User Guide
PRODUCT OVERVIEW
- ON AND OFF
- HD DISPLAY
- STRAP
- SENSOR
- CAHRGING
In order to make the measurement more accurate, please wear the watch on the wrist bone position, wear close to the skin, but not too tight.
TOUCH AND BUTTONS
Swipe down: The control center
Swipe up: Notification center
Swipe right: Quick function
Swipe left: The functions menu
Touch and hold the screen: Change the dial
ON: Hold down for 3 seconds until the screen lights up
OFF: Press and hold for 3 seconds, select power off,and press to turn on
If you hold down the power button for 3 seconds and fail to start the device, charge it and try again. Press to enter the function menu, and then click to return to the main page.
DOWNLOAD THE APP
Scan the QR code below to download and install the mobile phone client
Download APP: FetCloudPro
For iOS phones, search for FitCloudPro in the APP store for Android phones,
search for FitCloudPro in other App stores.
Pair and connect watch.
Open the APP on your phone, Register and log in your account)
⇓
Click Device – Add Device in app to search your device.
⇓
[Select the watch Bluetooth name:X2C in the search results to complete pairing
- Before pairing, keep the power of the watch higher than 20%. Otherwise the pairing may fails due to the low power.
- During pairing and connection, make sure the Bluetooth is on and the distance between the phone and the watch is within effective.
- The device requires android 6.0or higher, IOS 10.0 or higher.
WATCH CHARGE AND ACTIVATE
Attach the magnetic charging wire to the metal contact points of the charging
port until the charging indication appears on watch.When the battery in low
level the, please charge in time.
Before charging, keep the charging port clean and dry to avoid metal contact
corrosion or other risks.
The device is an all-in-one machine which is non-detachable
FUNCTION INTRODUCTION
Dial switch
Long press for 2s in home screen to enter the dial switch interface. Slide
right or left to switch the dial for selection and click to use the dial.
Control Center
Functional overview: DO Not Disturb(DND),Brightness adjustment,Settings,find
phone,power saving,system information * The function can be accessed by
sliding down in home screen
Movement Data
It displays the step number, distance and calories on the same day. You can
set a goal on the App, including step number distance and calories.
Sports
Options for sport patterns: walking, running,cycling, mountain climbing,
swimming, yoga,round-belly machine and basketball ect. Click the icon to start
sport.
Sport record
This function saves the last 10 times historical sport records. You could
check your data like sport duration, heart rate and calories for that period
of time.
Heart rate
Enter the interface for heart rate measurement When the green light at the
bottom is on it will start measurement. The measurement will be completed
within 40s and has a vibration reminder.lf the watch prompts for “No Watch”
please adjust the watch and try again.
Sleep
The interface displays the monitoring result of your sleep on the same day.The
data is updated every day.Connect it to the APP and you can upload and save
the data synchronously.The device will recalculate the data information for
the new day.
Blood pressure
The green light bottom the watch will on and begin working when enter the
interface for blood pressure measurement.The measurement will be completed
within 30-60s and has a vibration reminder. The measurement is based on PPG
technology.
Blood oxygen
Enter the interface for blood oxygen measurement. When the green light at the
bottom is on, it will start measurement. The measurement will be completed
within 30-60s and has a vibration reminder. The measurement is based on PPG
technology.
Information
After you connect your watch with the APP and open Information Push on the App
and the watch can receive the corresponding message.The watch can keep the
latest 15 pieces of messages at the same time.
Weather
After you connect your watch with the APP and open the location permission,
the weather interface will display current temperature and weather .
Female Health
After the watch connecting with the app and the Female Health Reminder is
enabled on app, the message from Female Health Reminder can be checked on
watch(This function will only be activated on watch while the user registered
as female).
Music
After the watch connecting with the app, you can control the state of your
phone music player (Pause or start, volume control and switch song).
Stopwatch
In Stopwatch function you can click the start Button to begin timing. Click
the pause button to stop the timing. Click the reset button to reset the clock
to zero. It can keep 99 pieces of time records at the same time.
Timer
In Timer function user could set a quick timer from the preset options in
system or click the User-defined button to set your own timer.
Alarm clock
After the watch connecting with the app,you can set a single alarm clock or a
cyclic alarm clock. You can set at most 5 alarm clocks at the same time.
Time setting
When setting the time, first click the hour or minute to be adjustable, then
slide up or down to adjust the number, and click again to confirm the time
setting. When setting the date, first click the year or month or day to be
adjustable, then slide up and down to adjust the number, and click again to
confirm the time setting.
Find my phone
After the watch connecting with the app,and click “Find my phone”. Your phone
will ring up and the watch will indicate that it have successfully found your
phone. If the watch isn’t connecting with the app it will indicate that it is
not connected.
Settings
The setting function includes menu style, screen display function (Change the
dial, screen-on time, brightness adjustment, wrist-turn screen-on time,
battery, vibration intensity, language, QR code, time setting, password,
system.
Drinking reminder
You can open this function from Device-Drinking Reminder on app. Then you can
set the start time, end time and reminder interval after the setting is on.
Sedentary reminder
You can open this function from Device-Sedentary Reminder on app. Then you can
set the start time, end time and the period for Do Not Disturb after the
setting is on.
FREQUENTLY ASKED QUESTIONS
Fail to start the watch
Press the power switch for more than 3s maybe the battery level is too low.
Please charge the battery timely.
The bluetooth is not connected or cannot be connected
- Try to restart the watch and reconnect.
- Please try to restart the phone with Bluetooth and connect again.
- Do not connect to other Bluetooth devices.
The measurement of heart rate, blood pressure, blood oxygen is inaccurate
- Generally, it is caused by poor contact between the sensor of the watch and human body.
- Please ensure that the sensor contacts the wrist well during.
- Please keep your body still and the watch attached to your wrist tightly during measurement.
Sleep data are not accurate enough
- Sleep monitoring simulates the status of natural sleep and getting up of human,and you should wear it as usual.
- 1f you sleep too late or you do not wear the watch until you go to sleep,there may be some error.
- It does not monitor the sleep data during daytime,The default time for sleep monitoring is from 9:30 in the evening to 12:00 at noon on the next day.
For more frequently asked questions, please view [My>FAQ] on the App
OPERATION GUIDE VIDEO.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>