AMENKER MF300 Heat Gun for Crafts Bubble Remover User Guide
- June 9, 2024
- AMENKER
Table of Contents
AMENKER MF300 Heat Gun for Crafts Bubble Remover
Specification
- Brand AMENKER
- Item Weight 11.3 ounces
- Product Dimensions 8.27 x 2.36 x 1.97 inches
- Model Number MF300
- Color Black
- Material Plastic
- Power Source ac/dc
- Voltage 110 Volts
- Wattage 300 watts
- Handle/Lever Placement Right
- Usage Bar Cutting
- Included Components Charger
What’s In the Box
- Heat Gun
- Charger
Precaution
- Avoid contacting with water! Avoid contacting the hot nozzle.
- Use only inside. Keep it out of children’s reach. Keep the heat tool and itrm 5–6 cm apart.
- To avoid overheating, do not use for longer than 10 minutes constantly.
- This hot air gun was created specifically for DIY; it cannot be used in an industrial setting.
Notice
- Can’t be disassembled and a minor repair welded on.
- Use a hot air gun at an angle other than 90 degrees.
- It is advised that the hot air gun’s air exit be 5–6 cm distant from the heated object.
- Work Time: 6 to 8 minutes (no more than 10 mins)
- If the temperature rises, please turn it off, and only use it after cooling.
Design for Secure Heat Dissipation
Product Layout
Product Description
-
A Little Heat Gun
High temperature resistance exterior ABS anti-slip hand-hold component of high quality You will always be safe thanks to the internal temperature control device and micro-circulation cooling system. After a few seconds, swiftly reach 200°C/390°F The heat gun’s interior temperature is lowered by two expert heat vents, extending its lifespan. Flexible and self-supporting stainless steel stand with 100° of adjustment On/Off switches and energy- saving 300W provide better safety -
Use Throughout the Board
- Inking powder
- Thermoplastic film
- Volume
- Stamp
- Paint that dries quickly, adhesive, and catalytic bonding
- Quick thawing
- Packaging PVC shrinkage
- Homemade handcrafted candles or soap
-
Technical Specification
- Material: Plastic ABS+PC
- Cable length: 6.56FT /180 cm
- Rated Power: 300W
- Rated voltage: 110v
- Power: 50-60Hz
- Working time: 8 minutes
- Power type: AC power supply
- Type: Constant temperature
Craft Heat Gun
(0-200-300°C) Dual temperature. Cable heat gun, 6.5 ft. For US clients, we specialize in creating DIY heat air fans. Electric Heat Gun for Crafts For DIY craft embossing, shrink-wrapping PVC, drying paint, clay, rubber stamping, and other purposes, a 110V 300W 200°C/300°C heat gun for the resin is available.
Resin Heat Gun
The heat gun for the resin circuit is set up with the temperature control device. The temperature control shuts off the current when it abnormally reaches a specific height with abnormal heat, protecting the circuit’s safe functioning and preventing the occurrence of hazardous conditions like melting and fire. The body is made of ABS, which serves as the outlet and has features like heat resistance, low-temperature resistance, etc.
CABLE AND METAL BRACKET, 6.6FT
Very long cable with UL safety certification allows for flexible use up to 6.6 feet. The left and right sides of the bracket contain heat sinks that can lower the internal temperature and extend its useful life. The stainless steel bracket can rotate around 100 degrees and can stand on the table safely.
QUICK TO USE
It is fairly simple to use a heat gun for crafts. Simply maintain a distance of 3 to 5 centimeters from your DIY project while heating it at a 45-degree angle to prevent injury. Although the temperature cannot be altered, it can swiftly heat up to 200 to 300 degrees Celsius and perform flawlessly.
Features
- It is made of brand-new, high-quality ABS and PC plastic and is equipped with a stainless steel mount that can spin over a full 360 degrees. It is extremely portable, strong, and useful.
- Keeping a 45-degree angle to the heat and a 5 to 6 cm distance from the job until it is finished. It can also increase its brightness in addition to its hardness.
- Heat vents are located on the left and right sides to lower the interior temperature and increase the object’s lifespan.
- Heat Blower for Shrink Wrap Tubing, Hot Air Paint Heaters, Miniature Epoxy Dryers, and Craft Heat Tools for Cup Turner Spinners
- The ideal alternative to a toaster or oven, this fantastic small heat gun may be used to heat rubber stamps, embossing powder, and shrinkable film. After using the gun, polymer clay will harden and become bright.
- Although the temperature cannot be changed, it can theoretically reach 200 degrees in a matter of seconds. But, only use it for a maximum of 10 minutes at a time before turning it off and back on to continue functioning.
FAQs
Does this product come with a warranty?****
Yes, there is a 12-month warranty. If you are not satisfied with the purchase, you can always contact us.
What is the difference between this and other heat guns?****
The heat gun is made of high quality material and it has a good performance. It is easy to use and it can be used for a long time.
Is this product safe?****
Yes, it is safe to use. It will not produce any harmful chemicals when heated. It also has an automatic shut off feature that will turn the device off if it becomes too hot.
Does this product come with a warranty?****
Yes, there is a 12-month warranty. If you are not satisfied with the purchase, you can always contact us.
Can a heat gun overheat?****
If it is blocked, the heat gun could overheat internally and catch fire or provide an electric shock. Never use a hot air tool near paper or other combustible or flammable materials, such as household cleaners. You shouldn’t touch the metal nozzle until the heat gun has had chance to cool down completely.
What is the purpose of a heat gun?****
Typical applications include defrosting frozen pipes during winter cold snaps, removing flooring, reupholstering or repairing furniture, stripping paint and outdated wallpaper when rebuilding or refurbishing, and more.
How long can you run a heat gun?****
However, it is advised against using a heat gun for more than 15 to 20 minutes nonstop before letting it cool.
Will a heat gun remove bubbles from resin?****
You can apply the surface with steady back and forth sweeps using a hot air gun. The surface tension is broken by the hot air, which causes the bubbles to pop. After your pour, you should be sure to do this as quickly as you can. Take caution not to overheat your resin if you plan to utilize a hot air pistol.
Does a heat gun use a lot of electricity?****
The vast majority of heat guns on the market today are corded electric models, and they require a lot of power. DIY models typically start out at around 1800 watts, while at the other end of the market, the Steinel HG 5000 E Professional Hot Air Tool is rated at 3400 watts and has a factory sealed motor.
Are heat guns easy to use?****
When compared to blow torches, heat pistols are portable, simple equipment that are less likely to scorch wood or break glass. This indicates that they have mostly supplanted the traditional paraffin and bottled gas blow torch for removing paint from wood.
What temperature is a heat gun?****
A heat gun is a tool that may be carried in the hand and emits a stream of hot air that is typically between 100 °C and 550 °C (200-1000 °F) in temperature. Some hotter models can reach temperatures as high as 760 °C (1400 °F).
Does a heat gun remove all paint?****
Old paint, varnish, and other finishes can be easily removed with the aid of heat guns. They excel at simultaneously removing several coats of paint. By softening the paint and forcing it to bubble up, the heat gun makes it simple to remove using a metal scraper.