Whirlpool WIC 3B26 Integrated Standard Dishwasher User Guide

Whirlpool WIC 3B26 Integrated Standard Dishwasher

THANK YOU FOR BUYING A HOTPOINT PRODUCT. In order to receive more complete assistance, please register your appliance at: www.whirlpool.eu/register You can download the Safety Instructions and the User Manual, by visiting our website docs.whirlpool.eu, and following the instructions on the back of this booklet. Before using the appliance carefully read the Safety Instructions guide.

PRODUCT DESCRIPTION

APPLIANCE

1. Upper rack
2. Foldable flaps
3. Upper rack height adjuster
4. Upper spray arm
5. Lower rack
6. Cutlery basket
7. Lower spray arm
8. Filter Assembly
9. Salt reservoir
10. Detergent and Rinse Aid dispensers
11. Rating plate
12. Control panel

CONTROL PANEL

1. On-Off/Reset button with indicator light
2. Program selection button
3. Salt refill indicator light
4. Rinse Aid refill indicator light
5. Program number and delay time indicator
6. Delay indicator light
7. Display
8. Half Load indicator light
9. Delay button
10. Half Load button
11. Tablet (Tab) button with indicator light

FIRST TIME USE

SALT, RINSE AID, AND DETERGENT

ADVICE REGARDING THE FIRST-TIME USE

After installation, remove the stoppers from the racks and the retaining elastic elements from the upper rack.

FILLING THE SALT RESERVOIR

The use of salt prevents the formation of LIMESCALE on the dishes and on the machine’s functional components.

• It is mandatory that  THE SALT RESERVOIR NEVER BE EMPTY.
• It is important to set the water hardness.

The salt reservoir is located in the lower part of the dishwasher (see PRODUCT DESCRIPTION) and must be filled when the  SALT REFILL indicator light in the control panel is lit.

1. Remove the lower rack and unscrew the reservoir cap (anticlockwise).
2. Only the first time you do this: fill the salt reservoir with water.
3. Position the funnel (see figure) and fill the salt reservoir right up to its edge (approximately 1 kg); it is not unusual for a little water to leak out.
4. Remove the funnel and wipe any salt residue away from the opening.

Make sure the cap is screwed on tightly so that no detergent can get into the container during the wash program (this could damage the water softener beyond repair).  Whenever you need to add salt, it is mandatory to complete the pro cedure   before   the   beginning   of   the washing   cycle   to   avoid   corrosion.

SETTING THE WATER HARDNESS

To allow the water softener to work in a perfect way, it is essential that the water hardness setting is based on the actual water hardness in your house. This information can be obtained from your local water supplier.

The factory sets the default value for the water hardness.

• Switch on the appliance by pressing the  ON/OFF
• Switch off the appliance by pressing the  ON/OFF
• Hold down button  P for 5 seconds, until you hear a
• Switch on the appliance by pressing the  ON/OFF
• The current selection level number and the salt indicator light both
• Press button  P to select the desired hardness level (see WATER HARDNESS TABLE).

Water   Hardness Table

Level| °dH

German degrees

| °fH

French degrees

1| Soft| 0 – 6| 0 – 10
2| Medium| 7 – 11| 11 – 20
3| Average| 12 – 17| 21 – 30
4| Hard| 17 – 34| 31 – 60
5| Very hard| 35 – 50| 61 – 90

• Switch off the appliance by pressing the  ON/OFF Setting is complete!

As soon as this procedure is complete, run a program without loading.  Only use salt that has been specifically designed for dishwashers. After the salt has been poured into the machine, the SALT REFILL indicator light switches off.

If the salt container is not filled, the water softener and the heating element may be damaged as a result.

FILLING THE RINSE AID DISPENSER

Rinse aid makes dish DRYING easier. The rinse aid dispenser  A should be filled when the  RINSE AID REFILL indicator light in the control panel is lit.

1. Open the dispenser  B by pressing and pulling up the tab on the
2. Pour in the rinse aid (max.110 ml), making sure it does not overflow from the If this happens, clean the spill immediately with a dry cloth.
3. Press the lid down until you hear a click to close it.

NEVER   pour   the   rinse   aid   directly into   the   appliance   tub.

ADJUSTING THE DOSAGE OF RINSE AID

If you are not completely satisfied with the drying results, you can adjust the quantity of rinse aid used.

• Switch the dishwasher on using the  ON/OFF
• Switch it off using the  ON/OFF
• Press button  P  three times – a beep will be
• Switch it on using the  ON/OFF
• The current selection level number and rinse aid indicator light
• Press button  P to select the level of rinse aid quantity to be
• Switch it off using the  ON/OFF button

The setting is complete!

If the rinse aid level is set to ZERO (ECO), no rinse aid will be supplied. The LOW RINSE AID indicator light will not be lit if you run out of rinse aid. A maximum of 5 levels can be set according to the dishwasher model. The factory setting is specific to the model, please follow the instructions above to check this for your machine.

• If you see bluish streaks on the dishes, set a low number (2-3).
• If there are drops of water or limescale marks on the dishes, set a mid-range number (4-5).

FILLING THE DETERGENT DISPENSER

To open the detergent dispenser use the opening device A. Introduce the detergent into the dry dispenser B only. Place the amount of detergent for pre-washing directly inside the tub.

1. When measuring out the detergent refer to the mentioned earlier information to add the proper quantity. Inside dispenser B, there are indications to help the detergent dosing.
2. Remove detergent residues from the edges of the dispenser and close the cover until it clicks.
3. Close the lid of the detergent dispenser by pulling it up until the closing device is secured in place.

The detergent dispenser automatically opens up at the right time according to the program. If all-in-one detergents are used, we recommend using the TABLET button, because it adjusts the program so that the best washing and drying results are always achieved.

ECO program data is measured under laboratory conditions according to European Standard EN 50242.

• Not all options can be used simultaneously.
• The duration of the program shown on the display or in the booklet is an estimate calculated on standard conditions. The actual time may vary depending on many factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options, and sensor calibration. The sensor calibration can increase program duration by up to 20 min.
• Standby consumption:  Left-on mode consumption: 5 W
• Off-mode consumption: 0.5 W

PROGRAMS DESCRIPTION

Instructions on wash cycle selection.

• ECO   Normally soiled crockery. The standard program is the most efficient in terms of its combined energy and water consumption.
• INTENSIVE   Program is recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used for delicate items).
• NORMAL   Normally soiled crockery. Everyday cycle, ensures optimal cleaning performance in a shorter time.
• RAPID 30’  Program to be used for lightly-soiled dishes with no dried food residues. (Ideal for 2 place settings).
• PRE-WASH  Crockery to be washed later. No detergent is to be used with this program.
• SANITIZING Normally or heavily soiled crockery, with additional antibacterial wash.

Notes: Please note that cycles like Rapid or Fast are most effective for lightly soiled dishes. To reduce consumption even further, only run the dishwasher when it is full.

OPTIONS AND FUNCTIONS

OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).

If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times and beeps will sound. The option will not be enabled.

DELAY

The start time of the program may be delayed for a period of time between 1 and 12 hours.

1. Press the DELAY button: the corresponding «h» symbol appears on the display; each time you press the button, the time (1h, 2h, etc. up to max. 12h) from the start of the selected wash cycle will be increased.
2. Select the wash program, press the START/Pause button, and within 4 seconds close the door: the timer will begin counting down.
3. Once this time has elapsed, the indicator light «h» switches off and the wash cycle begins.

To adjust the delay time and select a shorter period of time, press the DELAY button. To cancel it, press the button repeatedly until the selected delayed start indicator light «h» switches off.

The DELAY function cannot be set once a wash cycle has been started.

HALF LOAD
If there are not many dishes to be washed, a half-load cycle may be used in order to save water, electricity, and detergent. Select the program and press the HALF LOAD button: the indicator light will light up. Press the HALF LOAD button to deselect this option.  Remember to halve the amount of detergent.

TABLET (Tab)

This setting allows you to optimize the performance of the program according to the type of detergent used. Press the START/Pause button for 3 seconds (the corresponding symbol will light up) if you use combined detergents in tablet form (rinse aid, salt, and detergent in 1 dose).

If you use powder or liquid detergent, this option should be off.

NaturalDry

NaturalDry is a convection drying system that automatically opens the door during/after the drying phase to ensure exceptional drying performance every day. The door opens at a temperature that is safe for your kitchen furniture, thus door will not be opened when the option of POWER CLEAN or TURBO is on. As additional steam protection, specially designed protection foil is added together with the dishwasher. To see how to mount protection foil please refer to (the INSTALLATION GUIDE).

NaturalDry functionality could be disabled by the user as follows:

1. Go to the Dishwasher software menu by pressing and holding the P button (6 sec).
2. You switched to NaturalDry Control Menu, you could change the status of NaturalDry functionality by pressing the P button: E – enabled d – disabled To confirm the change and exit from the Control Menu please press and hold the P button (3 sec).

DAILY USE

1. CHECK WATER CONNECTION: Check that the dishwasher is connected to the water supply and that the tap is open.
2. SWITCH ON THE DISHWASHER:  Open the door and press the  ON/OFF  button.
3. LOAD THE   RACK S (see LOADING THE RACKS).
4. FILLING THE DETERGENT DISPENSER
5. CHOOSE THE PROGRAM AND CUSTOMISE THE CYCLE: Select the most appropriate program in accordance with the type of crockery and its soiling level (see PROGRAMS DESCRIPTION) by pressing the  P button. Select the desired options (see OPTIONS AND FUNCTIONS).
6. START: Start the wash cycle by pressing the  START/Pause button (led is lit) and closing the door within 4 sec. When the program starts you hear a single beep. If the door was not closed within 4sec., the alarm sound will be played. In this case, open the door, press the  START/Pause button, and close the door again within 4 sec.
7. END OF WASH CYCLE: The end of the wash cycle is indicated by beeps and by the flashing of the wash cycle number on the display. Open the door and switch off the appliance by pressing the  ON/OFF button. Wait for a few minutes before removing the crockery – to avoid burns. Unload the racks, beginning with the lower one.

The machine will switch off automatically during certain extended periods of inactivity, in order to minimize electricity consumption. If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, reduce the amount of detergent used accordingly.

MODIFYING A RUNNING PROGRAM

If a wrong program was selected, it is possible to change it, provided that it has only just begun: open the door, press and hold the  ON/OFF button, and the machine will switch off. Switch the machine back on using the  ON/OFF button and select the new wash cycle and any desired options; Start the wash cycle by pressing the  START/Pause  button (led is lit) and closing the door within 4 sec.

ADDING EXTRA CROCKERY

Without switching off the machine, open the door ( START/Pause led starts blinking) ( beware of HOT steam! ) and place the crockery inside the dishwasher. Press the  START/Pause button and close the door within 4 sec., and the cycle will resume from the point at which it was interrupted.

ACCIDENTAL INTERRUPTIONS

If the door is opened during the wash cycle, or if there is a power cut, the cycle stops. Once the door has been closed or the electricity supply is restored, to start again the cycle from where it was interrupted, press the START/PAUSE  button.

For more information about the functions, you can request or download from the WEB a Use & Care Guide by following the instructions on the last page.

ADVICE AND TIPS

TIPS

Before loading the baskets, remove all food residues from the crockery, and empty the glasses.  You do not need to rinse beforehand under running water. Arrange the crockery so that it is held in place firmly and does not tip over; and arrange the containers with the openings facing downwards and the concave/convex parts placed obliquely, thus allowing the water to reach every surface and flow freely.

Warning: lids, handles, trays, and frying pans do not prevent the sprayer arms from rotating.

Place any small items in the cutlery basket. Very soiled dishes and pans should be placed in the lower basket because in this sector the water sprays are stronger and allow a higher washing performance. After loading the appliance, make sure that the sprayer arms can rotate freely.

UNSUITABLE CROCKERY

• Wooden crockery and
• Delicately decorated glasses, artistic handicrafts, and antique crockery. Their decorations are not resistant.
• Parts in synthetic material that do not withstand high
• Copper and tin
• Crockery soiled with ash, wax, lubricating grease or

The colors of glass decorations and aluminum/silver pieces can change and fade during the washing process. Some types of glass (e.g. crystal objects) can become opaque after a number of wash cycles too.

DAMAGE TO GLASS AND CROCKERY

• Only use glasses and porcelain guaranteed by the manufacturer as dishwasher safe.
• Use a delicate detergent suitable for crockery
• Collect glasses and cutlery from the dishwasher as soon as the wash cycle is over.

LOADING THE RACKS

UPPER RACK

Load delicate and light dishes:  glasses, cups, saucers, and low salad bowls.

ADJUSTING THE HEIGHT OF THE UPPER RACK

The height of the upper rack can be adjusted:  a high position to place bulky crockery in the lower basket and a low position to make the most of the tip-up supports by creating more space upwards and avoiding collision with the items loaded into the lower rack. The upper rack is equipped with an Upper Rack height adjuster (see figure), without pressing the levers, lift it up by simply holding the rack sides, as soon as the rack is stable in its upper position. To restore to the lower position, press the levers A at the sides of the rack and move the basket downwards.

We strongly recommend that you do not adjust the height of the rack when it is loaded. NEVER raise or lower the basket on one side only.

FOLDABLE FLAPS WITH ADJUSTABLE POSITION

The side foldable flaps can be positioned at three different heights to optimize th arrangement of crockery inside the rack. Wine glasses can be placed safely in the foldable flaps by inserting the stem of each glass into the corresponding slots. For optimum drying, results incline the foldable flaps more. To change the inclination, pull up the foldable flap, slide it slightly, and position it as you wish.

LOWER RACK

For pots, lids, plates, salad bowls, cutlery, etc. Large plates and lids should ideally be placed at the sides to avoid interferences with the spray arm. The lower rack has tip-up supports that can be used in a vertical position when arranging plates or in a horizontal position (lower) to load pans and salad bowls easily.

CUTLERY BASKET

The basket is equipped with top grilles for improved cutlery arrangement. The cutlery basket should be positioned only at the front of the lower rack.

Knives and other utensils with sharp edges must be placed in the cutlery basket with the points facing downwards or they must be positioned horizontally in the tip-up compartments on the upper rack.

CARE AND MAINTENANCE

CLEANING THE FILTER ASSEMBLY

Regularly clean the filter assembly so that the filters do not clog and that the waste water flows away correctly. Using a dishwasher with clogged filters or foreign objects inside the filtration system or spray arms may cause unit malfunction resulting in loss of performance, noisy work, or higher resource usage. The filter assembly consists of three filters that remove food residues from the washing water and then recirculate the water.

The dishwasher must not be used without filters or if the filter is loose.

At least once per month or after every 30 cycles, check the filter assembly and if necessary clean it thoroughly under running water, using a non-metallic brush and following the instructions below:

1. Turn the cylindrical filter  A in an anti-clockwise direction and pull it out (Fig 1).
2. Remove the cup filter  B by exerting a slight pressure on the side flaps (Fig 2).
3. Slide out the stainless-steel plate filter  C (Fig 3).
4. Inspect the trap and remove any food residues.  NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).

After cleaning the filters, re-place the filter assembly and fix it in position correctly; this is essential for maintaining the efficient operation of the dishwasher.

CLEANING THE WATER INLET HOSE

If the water hoses are new or have not been used for an extended period of time, let the water run to make sure it is clear and free of impurities before performing the necessary connections. If this precaution is not taken, the water inlet could become blocked and damage the dishwasher.

CLEANING THE SPRAY ARMS

On occasions, food residue may become encrusted onto the spray arms and block the holes used to spray the water. It is, therefore, recommended that you check the arms from time to time and clean them with a small non-metallic brush. To remove the upper spray arm, turn the plastic locking ring in an anti-clockwise direction. The upper spray arm should be replaced so that the side with the greater number of holes is facing upwards.

The lower spray arm may be removed by pulling it upwards.

CLEANING THE WATER INLET HOSE

If the water hoses are new or have not been used for an extended period of time, let the water run to make sure it is clear and free of impurities before performing the necessary connections. If this precaution is not taken, the water inlet could become blocked and damage the dishwasher.

TROUBLESHOOTING

Your dishwasher may not work properly. Before contacting the Service Centre check if the problem can be solved by going through the following list.

the “ click”.
It does not respond to commands.| Switch off the appliance by pressing the ON/OFF button, switch it back on after approximately one minute and reset the program.
The dishwasher won’t drain.| The wash cycle has not finished yet.| Wait until the wash cycle finishes.
The drain hose is bent.| Check that the drain hose is not bent (see INSTALATION INSTRUCTION).
The sink drain pipe is blocked.| Clean the sink drain pipe.
The filter is clogged up with food residues| Clean the filter (see CLEANING THE FILTER ASSEMBLY).
The dishwasher makes excessive noise.| The dishes are rattling against each.| Arrange the crockery correctly (see LOADING THE RACKS).
An excessive amount of foam has been produced.| The detergent has not been measured out correctly or it is not suitable for use in dishwashers (see FILLING THE DETERGENT DISPENSER). Reset dish- washer by pressing the DRAIN button (see OPTIONS AND FUNCTIONS) and run new program without detergent.
The dishes are not clean.| The crockery has not been arranged properly.| Arrange the crockery correctly (see LOADING THE RACKS).
The spray arms cannot rotate freely, being hindered by the dishes.| Arrange the crockery correctly (see LOADING THE RACKS).
The wash cycle is too gentle.| Select an appropriate wash cycle (see PROGRAMS TABLE).
An excessive amount of foam has been produced.| The detergent has not been measured out correctly or it is not suitable for use in dishwashers (see FILLING THE DETERGENT DISPENSER).
The cap on the rinse aid compartment has not been shut correctly.| Make sure the cap of the rinse aid dispenser is closed.
The filter is soiled or clogged.| Clean the filter assembly (see CARE AND MAINTENANCE).
There is no salt.| Fill the salt reservoir (see FILLING THE SALT RESERVOIR).

MAINTENANCE AND TROUBLESHOOTING GUIDE

For more information, maintenance procedures, and troubleshooting, see the Use and Care Guide. The Use and Care Guide can be obtained by:

• After-Sales Service; phone number see in the warranty booklet.
• download from the website:  www.docs.hotpoint.eu
• use QR code

TECHNICAL DATASHEET

The technical data containing the energy consumption data can be downloaded from the website: www.docs.hotpoint.eu

CONTACTING AFTER-SALES SERVICE

When you contact the After-Sales Service, you must provide the codes shown on the rating plate attached to the left or right side inside the door of the dishwasher. The phone number is listed in the warranty booklet or on the website: www.hotpoint.eu

FAQ’s

What is the most typical Whirlpool dishwasher issue?

The dishwasher’s drain is not working correctly. The detergent cup is malfunctioning. Water is not getting poured into the dishwasher. It leaks from the dishwasher door.

How long is the lifespan of a Whirlpool dishwasher?

Although the typical lifespan of a dishwasher is 10 years, several manufacturers claim their products may survive much longer. When it’s time to replace your appliance, you might find the following advice helpful: 10 years: Samsung, Thermador, KitchenAid, Maytag, and Bosch.

What is the most typical dishwashing issue?

One of the most frequent problems with dishwashers is improper dishwasher drainage. Even though it may be annoying, you can usually resolve the issue on your own.

Why don’t the dishes dry in a Whirlpool dishwasher?

The most frequent causes of a Whirlpool dishwasher failing to dry dishes properly are overloading and poor loading. By allowing enough space between each item for air to flow, overloads may be avoided.

What prevents the draining of a Whirlpool dishwasher?

Your dishwasher may not drain for a few different reasons. The dishwasher’s filter is the most typical place where obstructions occur.

Dishes can the Whirlpool dishwasher merely dry?

The best approach to guarantee that your dishes will be the driest at the conclusion of the cycle is to use a hot dry cycle.

How can you tell when a dishwasher from Whirlpool is finished?

When choosing your cycle, closing the dishwasher door, and pushing start, be sure nothing is obstructing the wash arms. A typical load will take 2.5 hours to complete, but light on the front or top of your dishwasher should let you know when the cycle is complete.

What setting on the dishwasher is ideal?

A Normal cycle is perfect for plates and glassware with minimal soiling because it doesn’t consume more water, takes longer to clean, or requires higher temperatures. Generally, for dishes with an average quantity of everyday filth and grime, this dishwasher cycle is the best to use.

Do dishwashers require regular upkeep?

Much like your vehicle and lawnmower, your dishwasher is a machine that has to be maintained. And if it malfunctions, you’ll have to DO THE DISHES BY HAND.

Are dishwashers energy-intensive?

The base electricity consumption of a dishwasher is delightfully low. If you had a 10 cent per kWh power plan and a 1200-watt model, you would spend 1.2 kilowatt-hours, or around 12 cents, each load.

How much water does a one-hour cycle in a Whirlpool dishwasher use?

It depends on the cycle being utilised, according to the user handbook. Though some of the alternatives will require more, it appears to be between 3.38 and 7.87 gallons. It appears that a heavy wash will require an additional 3 to 4 gallons.

What are the top three guidelines for utilising a dishwasher?

Glasses and plates that are packed together may chip or break (and won’t get cleaned either). Before entering the machine, wait for it to cool down to avoid getting burned by the steam. Close the dishwasher door after using it to avoid someone tripping over it.

Why is the interior of my Whirlpool dishwasher moist after a cycle?

The dishwasher’s internal walls may have some condensation, which is common during the drying process.

Does the dishwasher from Whirlpool heat water?

The dishwasher will often pause twice or three times during the cycle to heat the water to the right temperature for cleaning.

Where is the dishwasher filter in my Whirlpool?

Remove your lowest dish rack to reveal the dishwasher’s bottom so you can reach the filter there. Either the bottom of the bottom spray arm or the back corner of the dishwashing tub contains the filter.

Can a Whirlpool dishwasher be reset?

Certain models demand that you unplug the dishwasher or turn off the circuit breaker to turn off the electricity to the appliance. Others can be reset by holding down the Start/Reset button on the control panel while doing so, then starting a wash cycle after a brief pause.

Download this PDF Link:Whirlpool WIC 3B26 Integrated Standard Dishwasher User Guide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>