Mobisun Pro Power Station User Manual
- June 9, 2024
- Mobisun
Table of Contents
Mobisun Pro Power Station
TECHNICAL SPECIFICATIONS
Charge with:
Wall socket (via battery charger) Charging time approx.
2.5 hours
29 W SunPower solar panel Charging time approx.
15 hours
Input
23V ~ 75V DC input with 2 pin GX16 DC-connection
Outputs
AC outlet, 230VAC, 50Hz, 250W continuous, 500W peak, pure sine wave
12V car plug up to 12.5A (150W)
1 x USB 5V, 2.4A 1 x USB Quick Charge 3.0
Battery
Battery type
NMC
Battery capacity
259 Wh (14.8V 17.5 Ah)
Battery life Approx. 5 years (1.500 charge
cycles, 80% DOD)
General
Weight
6 kg
Dimensions
57 x 28 x 6.5 cm
Warranty
12 months
Certifications
Optimal operating temperature
0-40° C
Protections:
Battery voltage low
Automatic
Battery voltage too full
Automatic
Overload
Automatic
Short circuit
Automatic
Overtemperature
Automatic
Overheating Turn off the power switch and put the Mobisun Pro in a
cooler environment. Wait 5 to 10 minutes and turn on the Mobisun Pro again.
USE CASES
- Small electrical appliances
- TV
- Laptop
- Soundsystem
- Refrigeration Equipment
- Electric bike
- Sander
- Lighting
- Slowcooker
- Slowjuicer
- 12V coffee machine
- Tablet
- Smartphones
- etc.
Overview
Charging
During charging the LED display on the back begins to flash. Electrical devices can be powered during charging.
- The integrated battery is automatically charged by placing the solar panel into direct sunlight. Place the panel in a right (90°) angle towards to sun for maximum charge efficiency.
- Charge the integrated battery in 2.5 hours with the supplied adapter. The DC input can also be connected to an external 23V Mobisun solar panel (60W or 100W). This wil reduce the solar charging time to 3 – 5 solar hours.
Usage
The powerswitch (blue light on) activates 3 functions:
Turn the power switch off (blue light off) when no power is needed. In the off position charging in the sun or via the adapter is still possible.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>