Electrolux E8SI1-82BM Steam Iron Instructions
- June 9, 2024
- Electrolux
Table of Contents
Electrolux E8SI1-82BM Steam Iron
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that
brings with it decades of professional experience and innovation. Ingenious
and stylish, it has been designed with you in mind. So whenever you use it,
you can be safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux.
Visit our website to: Get usage advice, brochures, trouble shooter, service information: www.electrolux.com Register your product for better service: www.electrolux.com/productregistration Buy accessories and consumables for your appliance: www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
When contacting Service, ensure that you have the following data available:
- Model Number
- PNC number
- Serial number
The information can be found on the rating plate.
Thank you for choosing an Electrolux product. In order to ensure the best results, always use original Electrolux accessories and spare parts. They have been designed especially for your product. This product is designed with the environment in mind. All plastic parts are marked for recycling purposes. It may be possible that your steam iron does not produce steam immediately after filling it with water. The reason for this is that air trapped in the inner system can delay this function a few seconds. Please be patient and try it again by pressing the steam on/off button. For your convenience the steam will be produced after you release the steam on/ off button for a few seconds and it is not necessary to press the button all the time. Find out your rhythm for the best steaming result.
COMPONENTS
- A. Hot soleplate indicator
- B. Water spray nozzle
- C. Light indicator for heat-up/cool-down
- D. Headlight illuminating ironing area
- E. Touch screen for temperature-steam programme selection
- F. Reminder for Flush Clean & replacing Soft Water Activator
- G. Steam jet button
- H. Spray button
- I. Steam on/off button
- J. Power cord
- K. Flush Clean button
- L. Soft Water Activator, replaceable
- M. Water tank with max level indicator
- N. Cord wrap facility
- O. RESILIUM anodized ski-sloped soleplate
- P. Water fill & Water Softener System cover
- Q. Iron heel
- R. Water filling container
USING
CLEANING
GETTING STARTED AND OPERATING INSTRUCTIONS
-
Before first use. Remove all adhesive remains and gently rub with a dampened cloth. Rinse water tank to remove foreign particles. Position the steam iron horizontally on the ironing-board or on a heat resistant, secure surface at the same height as an ironing-board. Unwind and straighten the power cord.
-
Fill the steam iron with water. Make sure, the plug is outside the power outlet. Raise the heel of the iron, open the filling aperture cover (P). Use the water filling container provided (R), pour water to maximum level (M). Close the cover (P). This product is appropriate for use with tap water. It is recommended to use Electrolux AquaSense filtered water resp. a mix of 50% distilled, 50% tap water if the tap water is particularly hard. Always refill the water tank to MAX level using cold water. Caution! Never operate the appliance without any water in the tank. This product is equipped with a detachable Soft Water Activator (L), we recommend to replace when the reminder for Flush Clean & replacing Soft Water Activator (F) is flashing. Before starting ironing, please test your iron on an old towel to ensure that no residues inside the iron are transferred to your garments. If necessary, wipe the soleplate with a slightly damp cloth.
-
Connect the steam iron to the mains supply. Select the ironing programme from the touch screen (E) on the steam iron. The light indicator (C) on the iron will pulsate when preheating. When turned on for the first time, temporary vapours/odours may occur. The iron is equipped with an auto-steam function, which automatically adjusts the steam output to the selected ironing programme supporting best ironing results.
-
As soon as the selected temperature has been reached, the lights indicator (C) is on permanently and the headlight (D) turns on. Now the iron is ready to be used.
-
To activate the steam function, press and hold the steam on/off button (I) for 3-5 seconds.
-
For extra steam, press the steam jet button for one second.
Iron with extra steam: Press the steam buttons the same time for improved crease removal. When releasing the buttons, use up the steam before putting the iron back on its heel. Caution! Never release steam while the iron is standing on its heel. Dry ironing: When not pressing steam buttons, the iron will be in dry mode. -
Using the spray mist. Pre-damp fabrics by pressing the spray button several times to release a fine mist; ensure the tank is at least half full.
-
Steam hanging items. The vertical steam function is ideal for curtains and suits. Hold the iron at a distance of 10-20 cm and press the steam jet button.
-
The iron is equipped with 3-way auto-off function. If the iron is left unattended on soleplate or the side, it au www.electrolux.com tomatically turns off after 30 seconds. If left unattended on the heel it automatically turns off after 8 minutes. To GB turn it on again, move the iron. A short beep can be heard before the iron is switched off by itself. To reactivate the iron, move it shortly and it is back to working mode.
-
To switch-off the steam iron, press the selected setting for two seconds, a short beep can be heard and all lights will turn off. Disconnect the mains plug. Never pull the supply cord. Instead, grasp the plug and pull. Empty the water tank and let the iron cool completely before storage.
-
Always store the iron on its heel with the cord twisted loosley around the cable wrap facility. To clean exterior surfaces, use damp soft cloth and wipe dry. Do not use any chemical solvents, as they may damage the surface.
CLEANING (DO NOT USE ANY DETERGENT) -
Flush Clean (K). When reminder (F) flashes, fill the tank with water to max level (M) and select “Linen” programme. When headlight flashes, unplug the iron. Hold the iron over a sink, press theFlush Clean button (K). Use a full tank of water. Release button to stop Flush Clean function. Repeat the procedure if necessary.
NOTE: DO NOT USE ANY DESCALING FLUID, VINEGAR OR CITRUS ACID! -
Press the reminder for Flush Clean, Renew Filter (F) for 2 seconds and a short beep will be heard, after performing the 2 steps needed. Then the reminder light will switch off. Soft Water Activator (L) is recommended right after Flush Clean. Open water filling cover (P) and pull the Soft Water Activator (L) out for disposal. Replace with new Water Softener System Electrolux EDC03/900923064. Both Flush Clean & Water Softener System in combination ensure a clean, soft steam for best ironing results and longer lifetime of your steam iron.
-
Cleaning the soleplate (N). To remove burnt residues, iron over a damp cloth while the iron is still hot. To keep the soleplate smooth, avoid contact with metal objects. Never use scouring pads or harsh cleaners as they may damage the surface.
HOT SOLEPLATE INDICATOR (A) -
Your appliance is equipped with hot soleplate indicator ThermoSafe™ which detects when the soleplate is hot by changing its colour from black to red. Note! During heat-up time, the soleplate might be hot even though the sticker didn’t turn red. Once the temperature of the soleplate is < 40°C, the colour changes back to black showing the iron is ready to be stored away.
-
Turn off headlight by pressing both linen and outdoor for 1 sec.
-
Turn off sound by pressing both wool and cotton for 1 sec.
SAFETY ADVICE
Read the following instruction carefully before using machine for the first time.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
- Keep the iron and its cord out of reach of children less than 8 years of age when it is energized or cooling down.
- The surfaces are liable to get hot during use .
- This product is appropriate for use with tap water. It is recommended to use Electrolux AquaSense filtered water, taking out impurities like limescale. If the tap water is particularly hard, use a mix of 50% distilled water and 50% tap water.
- The appliance may only be connected to a power supply whose voltage and frequency comply with the specifications on the rating plate!
- The iron is not to be used if it has been dropped, if there are visible signs of damage on the iron or its cord or if it is leaking.
- The appliance must only be connected to an earthed socket. If necessary an extension cable suitable for 16 A can be used.
- If the appliance or the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person, in order to avoid hazard.
- The iron must be used and rested on a stable surface. When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.
- Never leave the appliance unattended while connected to the supply mains.
- The appliance must be switched off and the mains plug withdrawn each time after use, before cleaning and maintenance.
- The plug must be removed from the socket outlet before the water reservoir is filled with water.
- The mains cable must not come into contact with any hot parts of the appliance.
- Do not immerse the appliance in water or any other liquid.
- Do not exceed the maximum filling volume as indicated on the appliances.
- The filling aperture must not be opened during use.
- Before refilling of the water reservoir, please remove plug from socket.
- Do not pour vinegar, descalers or other scented substances into the tank. Otherwise the warranty may be revoked.
- This appliance is intended for domestic use only. The manufacturer cannot accept any liability for possible damage caused by improper or incorrect use.
IRONING CHART
TROUBLESHOOTING
DISPOSAL
This symbol on the product indicates that this product contains a battery which shall not be disposed with normal household waste. This symbol on the product or on its packaging indicates that the product may not be treated as household waste. To recycle your product, please take it to an official collection point or to an Electrolux service center that can remove and recycle the battery and electric parts in a safe and professional way. Follow your country’s rules for the separate collection of electrical products and rechargeable batteries.
Electrolux reserves the right to change products, information and specifications without notice.
For more information visit electrolux.com