IKEA Blaser Self-Adhesive Mirror Instructions
- June 9, 2024
- Ikea
Table of Contents
BLÅSER
Blaser Self-Adhesive Mirror
Self-adhesive mirror
Note: The surface can be damaged when removing the mirror from the wall.
The mirror fix to most surfaces which are even.
Fixing mirror to ceilings and sloping ceilings is not recommended.
The mirror can be used in bathrooms, but should not be fixed where they come
into direct contact with water, since water may damage the adhesive. On porous
surfaces like plywood and fibreboard, adhesion can be improved if the surface
is first coated with high-gloss lacquer.
Wipe the wall surface so that it is clean and dry before fixing the mirror.
Wipe the back of the mirror so that it is clean and dry before sticking the
tape on it.
Position and fix the tape according to the illustration in the assembly
instruction.
Remember to position and fix the mirror correctly from the start since the
tape cannot be reused.
The mirror may break when removing it from the wall. Be careful.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>